Changes

We will start by configuring the L2TP client. Open your device's WebUI and navigate to '''Services → VPN → L2TP''', add a new '''L2TP client''', once the configuration window opens, configure the client accordingly:

We will start by configuring the L2TP client. Open your device's WebUI and navigate to '''Services → VPN → L2TP''', add a new '''L2TP client''', once the configuration window opens, configure the client accordingly:

[[File:Networking rutxxx configuration examples l2tp rut configuration v2.png|border|class=tlt-border|1100px]]

[[File:Networking rutxxx configuration examples l2tp rut configuration v1.png|border|class=tlt-border|1100px]]

# '''Enable''' the configuration

# '''Enable''' the configuration

----

----

===Firewall configuration===

===Firewall configuration===

Once again we will need to open the WebUI of the Teltonika device and navigate to the '''Network → Interfaces → General''' Edit your '''LAN''' interface and change '''Protocol''' to '''DHCP'''.

Once again we will need to open the WebUI of the Teltonika device and navigate to the '''Network → Interfaces → General''' Edit your '''LAN''' interface and change '''Protocol''' to '''DHCP'''.

[[File:Networking rutxxx configuration examples LAN config v1.png|border|class=tlt-border|1100px]]

[[File:Networking rutxxx configuration examples l2tp rut configuration v2.png|border|class=tlt-border|1100px]]

[[File:Networking rutxxx configuration examples LAN config v2.png|border|class=tlt-border|1100px]]

[[File:Networking rutxxx configuration examples LAN config v2.png|border|class=tlt-border|1100px]]

To confirm this on the Teltonika router's WebUI navigate to '''Network → Interfaces → General''' on the LAN interface you should see MikroTik IP(in this example 192.168.88.x):

To confirm this on the Teltonika router's WebUI navigate to '''Network → Interfaces → General''' on the LAN interface you should see MikroTik IP(in this example 192.168.88.x):

[[File:Networking rutxxx configuration examples DHCP LAN v2.png|border|class=tlt-border|1100px]]

[[File:Networking rutxxx configuration examples DHCP LAN v1.png|border|class=tlt-border|1100px]]

Additionally, we can check if we can reach MikroTik router through L2TP IP(10.0.0.1) or a device behind the MikroTik. Once again open your device's CLI/SSH and execute the command ping 10.0.0.1 you should be able to reach the MikroTik virtual IP:

Additionally, we can check if we can reach MikroTik router through L2TP IP(10.0.0.1) or a device behind the MikroTik. Once again open your device's CLI/SSH and execute the command ping 10.0.0.1 you should be able to reach the MikroTik virtual IP: