Modbus data to server via MQTT TLS: Difference between revisions

Modbus data to server via MQTT TLS (view source)

9 bytes removed , 6 September 2023

no edit summary

51

edits

@@ Line 19: / Line 19: @@
 When installation of '''modRSsim2''' application has been successfully completed, open the application, and apply the following configuration.
-# # Select Protocol '''“MODBUS TCP/IP”.'''
+#  Select Protocol '''“MODBUS TCP/IP”.'''
-# # Click '''“Setup the communication Serial or TCP/IP port”''' button.
+#  Click '''“Setup the communication Serial or TCP/IP port”''' button.
-# [[File:ModRSim2 test1.png|left|thumb]]
+[[File:ModRSim2 test1.png|left|thumb]]
-# # Take note of the '''“Port”'''
+#  Take note of the '''“Port”'''
-# # Click '''“OK”''' to close the menu
+#  Click '''“OK”''' to close the menu
-# # Configure the static IP address of the Windows 10 Computer to match the one in the topology.
+#  Configure the static IP address of the Windows 10 Computer to match the one in the topology.
-# # Change some values in different register of the '''modRSsim2''' application as shown below:
+#  Change some values in different register of the '''modRSsim2''' application as shown below:
 ===Configuring Modbus TCP/IP Master===