Modbus data to server via MQTT TLS: Difference between revisions

Modbus data to server via MQTT TLS (view source)

50 bytes removed , 6 September 2023

m

no edit summary

51

edits

@@ Line 19: / Line 19: @@
 When installation of '''modRSsim2''' application has been successfully completed, open the application, and apply the following configuration.
-#  Select Protocol '''“MODBUS TCP/IP”.'''
+# Select Protocol '''“MODBUS TCP/IP”.'''
-#  Click '''“Setup the communication Serial or TCP/IP port”''' button.
+# Click '''“Setup the communication Serial or TCP/IP port”''' button.
-[[File:ModRSim2 test1.png|left|thumb]]
+# Take note of the '''“Port”'''
+# Click '''“OK”''' to close the menu
+# Configure the static IP address of the Windows 10 Computer to match the one in the topology.
+# Change some values in different register of the '''modRSsim2''' application as shown below:
-#  Take note of the '''“Port”'''
-#  Click '''“OK”''' to close the menu
-#  Configure the static IP address of the Windows 10 Computer to match the one in the topology.
-#  Change some values in different register of the '''modRSsim2''' application as shown below:
 ===Configuring Modbus TCP/IP Master===