31,703
edits
Changes
Template:Webui services rs232 rs232 configuration modem (view source)
Revision as of 11:15, 18 October 2018
, 11:15, 18 October 2018Created page with "In '''Modem''' serial type, the device imitates a dial-up modem. Connections to TCP/IP networks can be established using AT commands. The connection can be initiated by the de..."
In '''Modem''' serial type, the device imitates a dial-up modem. Connections to TCP/IP networks can be established using AT commands. The connection can be initiated by the device connected via serial interface with an ATD command: '''ATD <host>:<port>'''. If Direct connect settings are specified, the connection to the server is always active. Data mode can be entered by issuing the ATD command. Incoming connections are indicated by sending a RING to the serial interface.
The figure below is an example of available configuration fields for the Modem serial type and the table below provides information on these fields:
The figure below is an example of available configuration fields for the Modem serial type and the table below provides information on these fields:
