31,703
edits
Changes
Template:Signal strength leds table (view source)
Revision as of 08:43, 19 November 2018
, 08:43, 19 November 2018no edit summary
The signal strength LEDs can also be used as a '''time indicator for holding the reset button'''. When you press and hold the reset button, you have to hold it pressed for 5 seconds (by default) to initiate a factory reset. Each second, a new signal strength LED lights up. When all 5 LEDs are lit up, it represents that 5 seconds have passed since you pressed down on the reset button and that you can release it.
The signal strength LEDs can also be used as a '''time indicator for holding the reset button'''. When you press and hold the reset button, you have to hold it pressed for 5 seconds (by default) to initiate a factory reset. Each second, a new signal strength LED lights up. When all 5 LEDs are lit up, it represents that 5 seconds have passed since you pressed down on the reset button and that you can release it.
After releasing the button, all 5 LEDs will start blinking at once every 1 second. This signifies that the router '''has began the factory reset'''.
After releasing the button, all 5 LEDs will start blinking every 1 second. This signifies that the router '''has begun the factory reset'''.
