31,703
edits
Changes
Template:Networking rut manual administration (view source)
Revision as of 15:50, 19 July 2019
, 15:50, 19 July 2019no edit summary
<table class="nd-mantable">
<table class="nd-mantable">
<tr>
<tr>
<th>field name</th>
<th>Field</th>
<th>value</th>
<th>Value</th>
<th>description</th>
<th>Description</th>
</tr>
</tr>
<tr>
<tr>
<td>Router name</td>
<td>Router name</td>
<td>string; Default: '''RUT955'''</td>
<td>string; default: <b>RUT955</b></td>
<td>Router's name, used for easier management purposes</td>
<td>The router's model name.</td>
</tr>
</tr>
<tr>
<tr>
<td>Host name</td>
<td>Host name</td>
<td>string; Default: '''Teltonika-RUT955.com'''</td>
<td>string; default: <b>Teltonika-RUT955.com</b></td>
<td>Router's host name, i.e., an address from which you can reach the router's WebUI</td>
<td>The router's hostname. This can be used instead of the IP address to reach the router's WebUI from the local network.</td>
</tr>
</tr>
<td>Current password</td>
<td>Current password</td>
<td>string; Default: '''admin01'''</td>
<td>string; default: <b>none</b></td>
<td>Router's current admin password </td>
<td>The router's current password.</td>
<tr>
<tr>
<td>New password | Confirm new password</td>
<td>New password | Confirm new password</td>
<td>string; Default: '''admin01'''</td>
<td>string; default: <b>none</b></td>
<td>Changes the router's admin password</td>
<td>A new password for the router. The password must be comprised of 8-32 characters, including at least one upper case letter, one lower case letter and one digit.</td>
</tr>
</tr>
<tr>
<tr>
<td>Language</td>
<td>Language</td>
<td>English | Deutsch | Français | Turkish; Default: '''English'''</td>
<td>English | Deutsch | Français | Turkish; default: <b>English</b></td>
<td>Selects the router's interface language</td>
<td>Selects the router's WebUI language.</td>
</tr>
</tr>
<tr>
<tr>
<td>IPv6 Support</td>
<td>IPv6 Support</td>
<td>yes | no; Default: '''no'''</td>
<td>yes | no; default: <b>no</b></td>
<td>Toggles IPv6 suport ON or OFF</td>
<td>Turns IPv6 support on or off.</td>
</tr>
</tr>
<tr>
<tr>
<td>Show mobile info at login page</td>
<td>Show mobile info at login page</td>
<td>yes | no; Default: '''no'''</td>
<td>yes | no; default: <b>no</b></td>
<td>Show mobile data connection information (signal strength, state, service mode) at login page</td>
<td>Shows mobile data connection information (signal strength, state, service mode) at login page.</td>
</tr>
</tr>
<tr>
<tr>
<td>Show WAN IP at login page</td>
<td>Show WAN IP at login page</td>
<td>yes | no; Default: '''no'''</td>
<td>yes | no; default: <b>no</b></td>
<td>Show the router's WAN IP address at login page</td>
<td>Shows the router's WAN IP address at login page.</td>
</tr>
</tr>
<tr>
<tr>
<td>LEDs Indication</td>
<td>LEDs Indication</td>
<td>yes | no; Default: '''yes'''</td>
<td>yes | no; default: <b>yes</b></td>
<td>Toggles LED indication ON or OFF</td>
<td>Turns the router's LED indications on or off.</td>
</tr>
</tr>
<tr>
<tr>
<td>Reset button configuration</td>
<td>Reset button configuration</td>
<td>integer [5..60]; Default: '''5'''</td>
<td>integer [5..60]; default: <b>5</b></td>
<td>Specifies the minimum amount of time (in seconds) that the reset button has to be pressed and held in order to initiate a factory reset</td>
<td>Specifies the minimum amount of time (in seconds) that the reset button has to be pressed and held down in order to initiate a factory reset.</td>
</tr>
</tr>
<tr>
<tr>
<td>Restore to default</td>
<td>Restore to default</td>
<td>-</td>
<td>-(interactive button)</td>
<td>Restores the router to it's default state (factory settings)</td>
<td>Restores the router to it's default state (factory settings).</td>
</tr>
</tr>
</table>
</table>
