31,703
edits
Changes
Template:Networking trb manual static routes (view source)
Revision as of 16:32, 18 October 2019
, 16:32, 18 October 2019no edit summary
[[File:{{{file_routes}}}]]
[[File:{{{file_routes}}}]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Dalue</th>
<th>Description</th>
</tr>
<tr>
<td>Interface</td>
<td>mobile | lan; default: <b>mobile</b></td>
<td>The zone where the target network resides</td>
</tr>
<tr>
<td>Target<span class="asterisk">*</span>'</td>
<td>ip4; default: <b>0.0.0.0</b></td>
<td>The address of the destination network</td>
</tr>
<tr>
<td>Netmask<span class="asterisk">*</span></td>
<td>netmask; default: <b>255.255.255.255</b></td>
<td>A Mask that is applied to the Target to determine to what actual IP addresses the routing rule applies</td>
</tr>
<tr>
<td>Gateway</td>
<td>ip; default: <b>none</b></td>
<td>Defines where the router should send all the traffic that applies to the rule</td>
</tr>
<tr>
<td>Metric</td>
<td>integer; default: <b>0</b></td>
<td>The <b>metric</b> value is used as a sorting measure. If a packet about to be routed fits two rules, the one with the lower metric is applied.</td>
</tr>
<tr>
<td>MTU</td>
<td>integer; default: <b>1500</b></td>
<td></td>
</tr>
<tr>
<td>Route Type</td>
<td>unicast | local | broadcast | multicast | unreachable | prohibit | backhole | anycast | -- custom -- ; default: <b>unicast</b></td>
<td></td>
</tr>
</table>
<span class="asterisk">*</span><b>Additional notes on Target & Netmask:<b>
You can define a rule that applies to a single IP like this: Destination - some IP; Netmask - 255.255.255.255. Furthermore, you can define a rule that applies to a segment of IPs like this: Destination – some IP that STARTS some segment; Netmask – Netmask that defines how large the segment is. e.g.:
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>192.168.2.161</td>
<td>255.255.255.255</td>
<td>Only applies to 192.168.2.161.</td>
</tr>
<tr>
<td>192.168.2.0</td>
<td>255.255.255.240</td>
<td>Applies to IPs in the 192.168.2.0 - 192.168.2.15 range.</td>
</tr>
<tr>
<td>192.168.2.240</td>
<td>255.255.255.240</td>
<td>Applies to IPs in the 192.168.2.240 - 192.168.2.255 range.</td>
</tr>
<tr>
<td>192.168.2.161</td>
<td>255.255.255.0</td>
<td>Applies to IPs in the 192.168.2.0 - 192.168.55.255 range.</td>
</tr>
<tr>
<td>192.168.0.0</td>
<td>255.255.0.0</td>
<td>Applies to IPs in the 192.168.0.0 - 192.168.255.255 range.</td>
</tr>
</table>
[[Category:{{{name}}} WebUI]]
[[Category:{{{name}}} WebUI]]
