Changes

Line 89: Line 89:  
If you've followed all the steps presented above, your configuration should be finished. But as with any other configuration, it is always wise to test the setup in order to make sure that it works properly. In order to test an IPsec connection, login to the RUTX WebUI and go to '''Services → CLI'''. Login with user name: '''root''' and the router's admin password. From there you should then be able to '''ping''' the opposite instance's LAN IP address. To use a ping command, type '''ping <ip_address>''' and press the "Enter" key on your keyboard:
 
If you've followed all the steps presented above, your configuration should be finished. But as with any other configuration, it is always wise to test the setup in order to make sure that it works properly. In order to test an IPsec connection, login to the RUTX WebUI and go to '''Services → CLI'''. Login with user name: '''root''' and the router's admin password. From there you should then be able to '''ping''' the opposite instance's LAN IP address. To use a ping command, type '''ping <ip_address>''' and press the "Enter" key on your keyboard:
   −
[[File:Networking_RUTXxx_configuration_example_ipsec_ping_v1.png|1100x1100px]]
+
[[File:Networking_RUTXxx_configuration_example_ipsec_ping_v1.png]]
    
You can also test if LAN access is working the same way. Instead of pinging the opposite instance's LAN IP address, ping one of the end device's IPs. One common issue that can be encountered here is that the end devices '''might need their DHCP leases renewed'''. There are many methods of accomplishing this, but the easiest and most accessible way is to simply disconnect and reconnect the LAN cable to device or the router that it's connected to.
 
You can also test if LAN access is working the same way. Instead of pinging the opposite instance's LAN IP address, ping one of the end device's IPs. One common issue that can be encountered here is that the end devices '''might need their DHCP leases renewed'''. There are many methods of accomplishing this, but the easiest and most accessible way is to simply disconnect and reconnect the LAN cable to device or the router that it's connected to.
    
If the ping requests are successful, congratulations, your setup works! If not, we suggest that you review all steps once more.
 
If the ping requests are successful, congratulations, your setup works! If not, we suggest that you review all steps once more.
0

edits

Navigation menu