Changes

Line 28: Line 28:     
# '''Enable''' instance.
 
# '''Enable''' instance.
# Set '''My identifier''' (device identifier for IPsec tunnel).
+
# Add '''Remote endpoint''' (the Public IP address of the Cisco router).
# Write '''Local IP address/Subnet mask''' (an IP address/Subnet mask of the router on which the IPsec instance is configured).
+
# Write '''Pre shared key''' (a shared password used for authentication between the peers. The value of this field must match on both instances).
# Add '''Remote VPN endpoint''' (the Public IP address of the Cisco router).
+
# Set '''Local identifier''' (device identifier for IPsec tunnel, write RUTX LAN IP address).
# Set '''Remote identifier''' (remote address of the remote peer).
+
# Set '''Remote identifier''' (remote address of the remote peer, write Cisco LAN IP address).
# Write '''Remote IP address/Subnet mask''' (LAN IP address/Subnet mask of the Cisco router).
+
# Write '''Local subnet''' (an IP address/Subnet mask of the router on which the IPsec instance is configured).
 +
# Write '''Remote subnet''' (LAN IP address/Subnet mask of the Cisco router).
    
Next step in configuring IPsec instance is '''Phase''' settings. For this example we left the default RUTX '''Phase 1''' and '''Phase 2''' settings.
 
Next step in configuring IPsec instance is '''Phase''' settings. For this example we left the default RUTX '''Phase 1''' and '''Phase 2''' settings.
Line 43: Line 44:     
When you're finished with the configuration, click '''Save''' button and then you will be prompted back to IPsec window.
 
When you're finished with the configuration, click '''Save''' button and then you will be prompted back to IPsec window.
 +
 
==Cisco configuration==
 
==Cisco configuration==
  
0

edits

Navigation menu