31,703
edits
Changes
Template:Networking rutos manual interfaces (view source)
Revision as of 19:50, 11 May 2020
, 19:50, 11 May 2020no edit summary
==Network Interfaces==
==Network Interfaces==
The <b>Network Interfaces</b> section displays currently
The <b>Network Interfaces</b> section displays interfaces currently existing on this device.
{{#ifeq: {{{series}}} | RUTX
{{#ifeq: {{{series}}} | RUTX
<ul>
<ul>
<li><b>NAT</b> - the mobile connection uses NAT (network address translation).</li>
<li><b>NAT</b> - the mobile connection uses NAT (network address translation).</li>
<li><span style="color: red;"><b>Bridge</b></span> - bridges the LTE data connection with LAN. In this mode the router relay the IP address received from the ISP to another LAN device (e.g., computer). Using Bridge mode will disable most of the router’s capabilities and you will only be able to access your router's WebUI with a [[Setting_up_a_Static_IP_address_on_a_Windows_10_PC|static IP configuration]].</li>
<li><span style="color: red;"><b>Bridge</b></span> - bridges the LTE data connection with LAN. In this mode the device relay the IP address received from the ISP to another LAN device (e.g., computer). Using Bridge mode will disable most of the device’s capabilities and you will only be able to access your device's WebUI with a [[Setting_up_a_Static_IP_address_on_a_Windows_10_PC|static IP configuration]].</li>
</ul>
</ul>
</td>
</td>
<span class="asterisk">*</span> In <b>Bridge</b> mode the device assigns its WAN IP address to another device (identified by its MAC address}. It is used instead of Network Address Translation (NAT) in order to make this device "transparent" in the communication process.
<span class="asterisk">*</span> In <b>Bridge</b> mode the device assigns its WAN IP address to another device (identified by its MAC address}. It is used instead of Network Address Translation (NAT) in order to make this device "transparent" in the communication process.
<b>Important</b>: using Bridge mode will disable most of the router’s other capabilities.
<b>Important</b>: using Bridge mode will disable most of the device’s other capabilities.
</font>
</font>
|}}
|}}
<td>Override MAC address</td>
<td>Override MAC address</td>
<td>mac; default: <b>none</b></td>
<td>mac; default: <b>none</b></td>
<td>Override MAC address of the WAN interface. For example, your ISP (Internet Service Provider) gives you a static IP address and it might also bind it to your computers MAC address (i.e., that IP will only work with your computer but not with your router). In this field you can enter your computer’s MAC address and fool the gateway in to thinking that it is communicating with your computer.</td>
<td>Override MAC address of the WAN interface. For example, your ISP (Internet Service Provider) gives you a static IP address and it might also bind it to your computers MAC address (i.e., that IP will only work with your computer but not with your device). In this field you can enter your computer’s MAC address and fool the gateway in to thinking that it is communicating with your computer.</td>
</tr>
</tr>
<tr>
<tr>
<td>Start</td>
<td>Start</td>
<td>integer [1..255]; default: <b>100</b></td>
<td>integer [1..255]; default: <b>100</b></td>
<td>The starting IP address value. e.g., if your router’s LAN IP is 192.168.1.1 and your subnet mask is 255.255.255.0 that means that in your network a valid IP address has to be in the range of [192.168.1.0..192.168.1.254] (192.168.1.255 is a special unavailable address). If the Start value is set to 100 then the DHCP server will only lease out addresses starting from 192.168.1.<b>100</b>.</td>
<td>The starting IP address value. e.g., if your device’s LAN IP is 192.168.1.1 and your subnet mask is 255.255.255.0 that means that in your network a valid IP address has to be in the range of [192.168.1.0..192.168.1.254] (192.168.1.255 is a special unavailable address). If the Start value is set to 100 then the DHCP server will only lease out addresses starting from 192.168.1.<b>100</b>.</td>
</tr>
</tr>
<tr>
<tr>
