31,703
edits
Changes
Template:Networking rutos manual interfaces (view source)
Revision as of 19:53, 11 May 2020
, 19:53, 11 May 2020no edit summary
<tr>
<tr>
<td>Bring up on boot</td>
<td>Bring up on boot</td>
<td>off | on; default: <b>on</b></td>
<td>off <nowiki>|</nowiki> on; default: <b>on</b></td>
<td>Specifies whether the interface should be launched during the boot process. If set to <i>off</i>, the interface would have to be brought up manually after each boot.</td>
<td>Specifies whether the interface should be launched during the boot process. If set to <i>off</i>, the interface would have to be brought up manually after each boot.</td>
</tr>
</tr>
<tr>
<tr>
<td>Use built in IPv6-management</td>
<td>Use built in IPv6-management</td>
<td>off | on; default: <b>on</b></td>
<td>off <nowiki>|</nowiki> on; default: <b>on</b></td>
<td>Specifies whether to enable prefix delegation.</td>
<td>Specifies whether to enable prefix delegation.</td>
</tr>
</tr>
<tr>
<tr>
<td>Force link</td>
<td>Force link</td>
<td>off | on; default: <b>off</b></td>
<td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
<td>Specifies whether interface settings (IP, route, gateway) are assigned to the interface regardless of the link being active or only after the link has become active.</td>
<td>Specifies whether interface settings (IP, route, gateway) are assigned to the interface regardless of the link being active or only after the link has become active.</td>
</tr>
</tr>
<tr>
<tr>
<td>Use DNS servers advertised by peer</td>
<td>Use DNS servers advertised by peer</td>
<td><span style="color: red;">off</span> | on; default: <b>on</b></td>
<td><span style="color: red;">off</span> <nowiki>|</nowiki> on; default: <b>on</b></td>
<td>Specifies whether to use DNS servers obtained automatically or specified manually.</td>
<td>Specifies whether to use DNS servers obtained automatically or specified manually.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color: red;">Use custom DNS servers</span></td>
<td><span style="color: red;">Use custom DNS servers</span></td>
<td>off | on; default: <b>on</b></td>
<td>off <nowiki>|</nowiki> on; default: <b>on</b></td>
<td>Specifies whether to use DNS servers obtained automatically or specified manually.<br><b>Note:</b> this field only becomes visible when Use DNS servers advertised by peer is set to <i>off</i></td>
<td>Specifies whether to use DNS servers obtained automatically or specified manually.<br><b>Note:</b> this field only becomes visible when Use DNS servers advertised by peer is set to <i>off</i></td>
</tr>
</tr>
<tr>
<tr>
<td>Enabled</td>
<td>Enabled</td>
<td>off | on; default: <b>off</b></td>
<td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
<td>Turns the relay configuration on or off.</td>
<td>Turns the relay configuration on or off.</td>
</tr>
</tr>
