31,703
edits
Changes
Created page with "You can disable specific LAN ports by using the VLAN feature. Login to your device's WebUI and navigate to the <b>Network -> VLAN</b> page. From there, you can select which L..."
You can disable specific LAN ports by using the VLAN feature.
Login to your device's WebUI and navigate to the <b>Network -> VLAN</b> page. From there, you can select which LAN ports should be active and which should not.
<b>RUT Routers</b>
[[File:Networking_rut_faq_disable_lan_ports_v1.png|border|class=tlt-border]]
----
<b>RUTX Routers</b>
[[File:Networking_rutx_faq_disable_lan_ports_v1.png|border|class=tlt-border]]
----
'''Important note''': if you disable all LAN ports on the router, you will lose access to the router via Ethernet. To regain access to the router you can:
*login to the router's wireless access point (AP) (provided that you assigned a wireless access point to the VLAN configuration)
*login remotely [[How_to_reach_a_router's_WebUI_from_RMS%3F|via RMS]]
*login remotely [[How_can_I_access_my_router_remotely_through_the_WAN_interface%3F|via the router's public IP address]] (provided remote access was configured prior to VLAN)
*login remotely via VPN (provided the VPN was configured prior to VLAN)
*[[Device Recovery Options|reset the router's configuration]] to its default state
[[Category:FAQ]]
Login to your device's WebUI and navigate to the <b>Network -> VLAN</b> page. From there, you can select which LAN ports should be active and which should not.
<b>RUT Routers</b>
[[File:Networking_rut_faq_disable_lan_ports_v1.png|border|class=tlt-border]]
----
<b>RUTX Routers</b>
[[File:Networking_rutx_faq_disable_lan_ports_v1.png|border|class=tlt-border]]
----
'''Important note''': if you disable all LAN ports on the router, you will lose access to the router via Ethernet. To regain access to the router you can:
*login to the router's wireless access point (AP) (provided that you assigned a wireless access point to the VLAN configuration)
*login remotely [[How_to_reach_a_router's_WebUI_from_RMS%3F|via RMS]]
*login remotely [[How_can_I_access_my_router_remotely_through_the_WAN_interface%3F|via the router's public IP address]] (provided remote access was configured prior to VLAN)
*login remotely via VPN (provided the VPN was configured prior to VLAN)
*[[Device Recovery Options|reset the router's configuration]] to its default state
[[Category:FAQ]]