31,703
edits
Changes
Template:Networking rutos manual interfaces (view source)
Revision as of 12:01, 3 September 2020
, 12:01, 3 September 2020→Interface configuration
The <b>General Setup</b> section is used to set up the main operating parameters of the DHCP server.
The <b>General Setup</b> section is used to set up the main operating parameters of the DHCP server.
[[File:Networking_rutos_manual_interfaces_network_interfaces_lan_dhcp_server_general_setup_v1.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_interfaces_interface_configuration_dhcp_server_general_setup_lan_{{{lan}}}.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
Refer to the table below for information on the <b>Advanced Settings</b> section.
Refer to the table below for information on the <b>Advanced Settings</b> section.
[[File:Networking_rutos_manual_interfaces_network_interfaces_lan_dhcp_server_advanced_settings_v1.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_interfaces_interface_configuration_dhcp_server_advanced_settings.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
Refer to the table below for information on the <b>IPv6 Settings</b> section.
Refer to the table below for information on the <b>IPv6 Settings</b> section.
[[File:Networking_rutos_manual_interfaces_network_interfaces_lan_dhcp_server_ipv6_settings_v1.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_interfaces_interface_configuration_dhcp_server_ipv6_settings.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<tr>
<tr>
<td>Router Advertisement Service</td>
<td>Router Advertisement Service</td>
<td>disabled | relay mode | server mode | hybrid mode; default: <b>Disabled</b></td>
<td>Disabled | Relay mode | Server mode | Hybrid mode; default: <b>Disabled</b></td>
<td>Specifies whether router advertisements should be enabled (server mode), relayed or disabled. </td>
<td>Specifies whether router advertisements should be enabled (server mode), relayed or disabled. </td>
</tr>
</tr>
<tr>
<tr>
<td>DHCPv6 Service</td>
<td>DHCPv6 Service</td>
<td>disabled | relay mode | server mode | hybrid mode; default: <b>Disabled</b></td>
<td>Disabled | Relay mode | Server mode | Hybrid mode; default: <b>Disabled</b></td>
<td>Specifies whether DHCPv6 server should be enabled (server), relayed (relay) or disabled (disabled).</td>
<td>Specifies whether DHCPv6 server should be enabled (server), relayed (relay) or disabled (disabled).</td>
</tr>
</tr>
<tr>
<tr>
<td>NDP Proxy</td>
<td>NDP Proxy</td>
<td>disabled | relay mode | hybrid mode; default: <b>Disabled</b></td>
<td>Disabled | Relay mode | Hybrid mode; default: <b>Disabled</b></td>
<td>Specifies whether NDP should be relayed or disabled.</td>
<td>Specifies whether NDP should be relayed or disabled.</td>
</tr>
</tr>
<tr>
<tr>
<td>DHCPv6 Mode</td>
<td>DHCPv6 Mode</td>
<td>stateless | stateful-only | stateless + stateful; default: <b>stateless + stateful</b></td>
<td>Stateless | Stateful-only | Stateless + stateful; default: <b>Stateless + stateful</b></td>
<td>Router announcement (RA) mode.</td>
<td>Router announcement (RA) mode.</td>
</tr>
</tr>
You should be directed to a window that looks like this:
You should be directed to a window that looks like this:
[[File:Networking_rutos_manual_interfaces_network_interfaces_lan_static_lease_settings_v1.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_interfaces_interface_configuration_static_lease_settings.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
