Changes

<b>Static IP leases</b> are used to reserve specific IP addresses for specific devices by binding them to their MAC address. This is useful when you have a stationary device connected to your network that you need to reach frequently, e.g., printer, IP phone, etc.

<b>Static IP leases</b> are used to reserve specific IP addresses for specific devices by binding them to their MAC address. This is useful when you have a stationary device connected to your network that you need to reach frequently, e.g., printer, IP phone, etc.

This section displays static IP leases currently existing on this device.

This section displays static IP leases currently existing on this device. <u>In order to view the Static Lease section, the interface <b>protocol must be set to <i>Static</i></b></i>.</u>

 

<u>In order to view the Static Lease section, the interface <b>protocol must be set to <i>Static</i></b></i>.</u>

 

 

----

----

To access a lease's <b>settings</b> page, click the 'Edit' button located to the right of the lease:

The Static Lease list is empty by default. To add a new Static Lease look to the Add Lease section; enter a custom name for the lease and click the 'Add' button.

[[File:Networking_rutos_manual_interfaces_network_interfaces_lan_static_lease_edit_v1.png|border|class=tlt-border]]

[[File:Networking_rutos_manual_interfaces_interface_configuration_static_lease_add_button.png|border|class=tlt-border]]

You should be directed to a window that looks like this:

You should be redirected to the Settings page for that lease, which should look similar to this:

[[File:Networking_rutos_manual_interfaces_interface_configuration_static_lease_settings.png|border|class=tlt-border]]

[[File:Networking_rutos_manual_interfaces_interface_configuration_static_lease_settings.png|border|class=tlt-border]]

       <td>MAC address</td>

       <td>MAC address</td>

       <td>mac; default: <b>none</b></td>

       <td>mac; default: <b>none</b></td>

       <td>MAC address of a device that is on this interface's network.</td>

       <td>MAC address of a device that will connect to this network interface.</td>

     </tr>

     </tr>

     <tr>

     <tr>

</table>

</table>

After you click 'Save & Apply' you will be redirected back to the [[#Network_Interfaces|Network Interfaces]] page. If you wish to modify the lease later, you can find in the Static Lease list. Simply click the 'Edit' button next to it in order to enter the Settings page for the Static Lease.

 

The <b>Add Lease</b> section is used to create new static leases. To create a new lease, simply enter a custom name for it and click the 'Add' button.

{{#ifeq: {{{wifi}}} | 1 |

{{#ifeq: {{{wifi}}} | 1 |

===Relay Configuration===

===Relay Configuration===

<u>In order to view the Relay Configuration section, the interface <b>protocol must be set to <i>Static</i></b></i>.</u>

<u>In order to view the Relay Configuration section, the interface <b>protocol must be set to <i>Static</i></b></i>.</u>

[[File:Networking_rutos_manual_interfaces_network_interfaces_lan_relay_configuration_v1.png|border|class=tlt-border]]

[[File:Networking_rutos_manual_interfaces_interface_configuration_relay_configuration.png|border|class=tlt-border]]

<table class="nd-mantable">

<table class="nd-mantable">

<u>In order to view the Mobile Data Limit section, the interface <b>protocol must be set to <i>Mobile</i></b></i>.</u>

<u>In order to view the Mobile Data Limit section, the interface <b>protocol must be set to <i>Mobile</i></b></i>.</u>

[[File:Networking_rutos_manual_interfaces_network_interfaces_lan_general_setup_mobile_mobile_data_limit_v1.png|border|class=tlt-border]]

[[File:Networking_rutos_manual_interfaces_interface_configuration_mobile_mobile_data_limit.png|border|class=tlt-border]]

<table class="nd-mantable">

<table class="nd-mantable">