31,703
edits
Changes
Template:Networking rut manual mobile (view source)
Revision as of 10:54, 15 September 2020
, 10:54, 15 September 2020no edit summary
<b>Important</b>: using Passthrough mode will disable most of the router’s other capabilities.
<b>Important</b>: using Passthrough mode will disable most of the router’s other capabilities.
[[File:{{{file_passthrough}}}]]
[[File:Networking_rut_manual_mobile_general_mobile_configuration_passthrough_mode.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<b>Important</b>: using Bridge mode will disable most of the router’s other capabilities.
<b>Important</b>: using Bridge mode will disable most of the router’s other capabilities.
[[File:{{{file_bridge}}}]]
[[File:Networking_rut_manual_mobile_general_mobile_configuration_bridge_mode.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<li><b>[[Setting up a Static IP address on a Ubuntu 16.04 PC|Linux guide]]</b></li>
<li><b>[[Setting up a Static IP address on a Ubuntu 16.04 PC|Linux guide]]</b></li>
</ul>
</ul>
{{#ifeq: {{{dualsim}}} | 1 |
==SIM Management==
==SIM Management==
<tr>
<tr>
<td>Enable automatic switching<span class="asterisk">*</span></td>
<td>Enable automatic switching<span class="asterisk">*</span></td>
<td>yes | no; default: <b>no</b></td>
<td>yes {{!}} no; default: <b>no</b></td>
<td>Turns automatic SIM Switching on or off.</td>
<td>Turns automatic SIM Switching on or off.</td>
</tr>
</tr>
<tr>
<tr>
<td>On weak signal</td>
<td>On weak signal</td>
<td>yes | no; default: <b>no</b></td>
<td>yes {{!}} no; default: <b>no</b></td>
<td>Performs a SIM switch when signal strength value ([[RSSI]] in dBm) falls below a specified threshold. When this field is checked you will see an additional field for entering the minimum signal strength value appear.</td>
<td>Performs a SIM switch when signal strength value ([[RSSI]] in dBm) falls below a specified threshold. When this field is checked you will see an additional field for entering the minimum signal strength value appear.</td>
</tr>
</tr>
<tr>
<tr>
<td>On data limit</td>
<td>On data limit</td>
<td>yes | no; default: <b>no</b></td>
<td>yes {{!}} no; default: <b>no</b></td>
<td>Performs a SIM switch when the SIM card reaches the specified data limit for the designated period. Mobile data limit can be configured in the Services → Mobile → <b>[[#Mobile_Data_Limit|Mobile Data Limit]]</b> page.</td>
<td>Performs a SIM switch when the SIM card reaches the specified data limit for the designated period. Mobile data limit can be configured in the Services → Mobile → <b>[[#Mobile_Data_Limit|Mobile Data Limit]]</b> page.</td>
</tr>
</tr>
<tr>
<tr>
<td>On SMS limit</td>
<td>On SMS limit</td>
<td>yes | no; default: <b>no</b></td>
<td>yes {{!}} no; default: <b>no</b></td>
<td>Performs a SIM switch when the SIM card reaches the specified sent SMS limit for the designated period. SMS limit can be configured in the Services → Mobile → <b>[[#SMS_Limit|SMS Limit]]</b> page.</td>
<td>Performs a SIM switch when the SIM card reaches the specified sent SMS limit for the designated period. SMS limit can be configured in the Services → Mobile → <b>[[#SMS_Limit|SMS Limit]]</b> page.</td>
</tr>
</tr>
<tr>
<tr>
<td>On roaming</td>
<td>On roaming</td>
<td>yes | no; default: <b>no</b></td>
<td>yes {{!}} no; default: <b>no</b></td>
<td>Performs a SIM switch when roaming conditions are detected (i.e., when the SIM card connects to a foreign operator).</td>
<td>Performs a SIM switch when roaming conditions are detected (i.e., when the SIM card connects to a foreign operator).</td>
</tr>
</tr>
<tr>
<tr>
<td>No network</td>
<td>No network</td>
<td>yes | no; default: <b>no</b></td>
<td>yes {{!}} no; default: <b>no</b></td>
<td>Performs a SIM switch when the SIM card cannot find an operator to connect to.</td>
<td>Performs a SIM switch when the SIM card cannot find an operator to connect to.</td>
</tr>
</tr>
<tr>
<tr>
<td>On network denied</td>
<td>On network denied</td>
<td>yes | no; default: <b>no</b></td>
<td>yes {{!}} no; default: <b>no</b></td>
<td>Performs a SIM switch when access to a network is denied (usually by an operator).</td>
<td>Performs a SIM switch when access to a network is denied (usually by an operator).</td>
</tr>
</tr>
<tr>
<tr>
<td>On data connection fail</td>
<td>On data connection fail</td>
<td>yes | no; default: <b>no</b></td>
<td>yes {{!}} no; default: <b>no</b></td>
<td>Performs a SIM switch when the router does receive an LCP or ICMP echo from a specified host address.</td>
<td>Performs a SIM switch when the router does receive an LCP or ICMP echo from a specified host address.</td>
</tr>
</tr>
<b>Note</b>: remember to check the <i>Enable automatic switching</i> field above in order to make you SIM switching rules work.
<b>Note</b>: remember to check the <i>Enable automatic switching</i> field above in order to make you SIM switching rules work.
|}}
==Network Operators==
==Network Operators==
<b>Important</b>: remember that the 'Clear data limit' button doesn't clear the actual data usage statistics for the SIM card, only the data counters as calculated by the router.
<b>Important</b>: remember that the 'Clear data limit' button doesn't clear the actual data usage statistics for the SIM card, only the data counters as calculated by the router.
{{#ifeq: {{{series}}} | RUT9 |
==SMS Limit==
==SMS Limit==
<tr>
<tr>
<td>Enable SMS limit</td>
<td>Enable SMS limit</td>
<td>yes | no; default: <b>no</b></td>
<td>yes {{!}} no; default: <b>no</b></td>
<td>Turns SMS limitations on or off.</td>
<td>Turns SMS limitations on or off.</td>
</tr>
</tr>
<tr>
<tr>
<td>Period</td>
<td>Period</td>
<td>Month | Week | Day; default: <b>Month</b></td>
<td>Month {{!}} Week {{!}} Day; default: <b>Month</b></td>
<td>SMS limit period after which the sent SMS counter is reset on the specified <i>Start day</i>.</td>
<td>SMS limit period after which the sent SMS counter is reset on the specified <i>Start day</i>.</td>
</tr>
</tr>
<tr>
<tr>
<td>Start day | Start hour</td>
<td>Start day {{!}} Start hour</td>
<td>day of the month [1..31] | day of the week [Monday..Sunday] | hour of the day [1..24]; default: <b>1</b></td>
<td>day of the month [1..31] {{!}} day of the week [Monday..Sunday] {{!}} hour of the day [1..24]; default: <b>1</b></td>
<td>Specifies when the period of counting SMS messages should begin. After the period is over, the limit is reset and the count begins over again.</td>
<td>Specifies when the period of counting SMS messages should begin. After the period is over, the limit is reset and the count begins over again.</td>
</tr>
</tr>
<b>Important</b>: remember that the 'Clear SMS limit' button doesn't clear the actual sent SMS statistics for the SIM card, only the SMS counters as calculated by the router.
<b>Important</b>: remember that the 'Clear SMS limit' button doesn't clear the actual sent SMS statistics for the SIM card, only the SMS counters as calculated by the router.
|}}{{#ifeq: {{{dualsim}}} | 1 |
==SIM Idle Protection==
==SIM Idle Protection==
<tr>
<tr>
<td>Enable</td>
<td>Enable</td>
<td>yes | no; default: <b>no</b></td>
<td>yes {{!}} no; default: <b>no</b></td>
<td>Turns SIM Idle Protection on or off.</td>
<td>Turns SIM Idle Protection on or off.</td>
</tr>
</tr>
<tr>
<tr>
<td>Period</td>
<td>Period</td>
<td>Month | Week; default: <b>Month</b></td>
<td>Month {{!}} Week; default: <b>Month</b></td>
<td>How often SIM Idle Protection will be performed. Use the three following fields ('Day', 'Hour' and 'Minute') to set the exact time of the action.</td>
<td>How often SIM Idle Protection will be performed. Use the three following fields ('Day', 'Hour' and 'Minute') to set the exact time of the action.</td>
</tr>
</tr>
----
----
The test takes about 2 minutes, so make sure the router isn't doing anything important before you start the test because during it you will lose connectivity. It is very important to <b>wait for the test to finish before commiting any actions</b>. Commiting actions on the router during test phase you may cause the router to crash.
The test takes about 2 minutes, so make sure the router isn't doing anything important before you start the test because during it you will lose connectivity. It is very important to <b>wait for the test to finish before commiting any actions</b>. Commiting actions on the router during test phase you may cause the router to crash.
|}}
{{#ifeq:{{{name}}}|RUT955|{{Template:Networking_rut9xx_manual_mobile_usb_modem|file_usb_modem ={{{file_usb_modem}}}}}|}}
{{#ifeq:{{{name}}}|RUT955|{{Template:Networking_rut9xx_manual_mobile_usb_modem|file_usb_modem ={{{file_usb_modem}}}}}|}}
[[Category:{{{name}}} Network section]]
[[Category:{{{name}}} Network section]]
