Changes

[[File:Networking_rut_manual_mobile_general_network_frequency_bands_3g_{{{3g}}}_tdd_{{{tdd}}}.png|border|class=tlt-border]]

[[File:Networking_rut_manual_mobile_general_network_frequency_bands_3g_{{{3g}}}_tdd_{{{tdd}}}.png|border|class=tlt-border]]

You can find your router's modem variant in <i>Status → [[{{{name}}}_Device|Device Information]]</i> page and checking FW Version field. Usually, the first 5-7 characters indicate the modem variant, while modem's FW version number begins with "GAR". For example:

 

Information about router's modem module can be found by going to <i>Status → [[{{{name}}}_Device|Device Information]]</i> page and checking FW Version field.

Usually first 5-7 characters show modem module series code. For example:

 

{{#ifeq: {{{3g}}} | 0 |  

{{#ifeq: {{{3g}}} | 0 |  

===Force LTE network===

===Force LTE network===

The <b>Primary card</b> section is used to select which SIM slot will host the router's primary SIM card. The primary SIM card is the one which is active by default, while the secondary card stays inactive until switched to or set as primary.

The <b>Primary card</b> section is used to select which SIM slot will host the router's primary SIM card. The primary SIM card is the one which is active by default, while the secondary card stays inactive until switched to or set as primary.

[[File:{{{file_sim_management_card}}}]]

[[File:Networking_rut_manual_mobile_sim_management_primary_card.png|border|class=tlt-border]]

<b>Note</b>: both SIM cards cannot be active at the same time.

<b>Note</b>: both SIM cards cannot be active at the same time.

The <b>SIM switching</b> section is used to enable automatic SIM switching and to set the SIM switching check interval. Refer to the figure and table below for more information.

The <b>SIM switching</b> section is used to enable automatic SIM switching and to set the SIM switching check interval. Refer to the figure and table below for more information.

[[File:{{{file_sim_management_switching}}}]]

[[File:Networking_rut_manual_mobile_sim_management_sim_switching.png|border|class=tlt-border]]

<table class="nd-mantable">

<table class="nd-mantable">

Below the SIM switching section you can configure <b>SIM switching rules</b>, i.e., set up circumstances under which the router will perform a switch from using one SIM card to the other. Refer to the figure and table below for information.

Below the SIM switching section you can configure <b>SIM switching rules</b>, i.e., set up circumstances under which the router will perform a switch from using one SIM card to the other. Refer to the figure and table below for information.

[[File:{{{file_sim_management_conditions}}}]]

[[File:Networking_rut_manual_mobile_sim_management_sim_switching_rules.png|border|class=tlt-border]]

<table class="nd-mantable">

<table class="nd-mantable">

<b>Note</b>: remember to check the <i>Enable automatic switching</i> field above in order to make you SIM switching rules work.

<b>Note</b>: remember to check the <i>Enable automatic switching</i> field above in order to make you SIM switching rules work.

|}}

|}}

==Network Operators==

==Network Operators==