31,703
edits
Changes
Template:Networking rut manual mobile (view source)
Revision as of 15:42, 15 September 2020
, 15:42, 15 September 2020no edit summary
<b>Note</b>: remember to check the <i>Enable automatic switching</i> field above in order to make you SIM switching rules work.
<b>Note</b>: remember to check the <i>Enable automatic switching</i> field above in order to make you SIM switching rules work.
----
----
When configuring SIM switching from the Secondary card, a "Switch back to primary SIM card after timeout" becomes available:
When configuring SIM switching from the Secondary card, an additional field called "Switch back to primary SIM card after timeout" becomes available:
[[File:Networking_rut_manual_mobile_sim_management_sim_switching_rules_back_to_primary.png|border|class=tlt-border]]
[[File:Networking_rut_manual_mobile_sim_management_sim_switching_rules_back_to_primary.png|border|class=tlt-border]]
==Network Operators==
==Network Operators==
The <b>Network Operators</b> tab provides you with the possibility to scan for and manually manage mobile network operators to which the router's SIM card can connect to. Operator selection is only available for the primary SIM card. {{#ifeq: {{{dualsim}}} | 1 |In order to specify an operator for a SIM card it must first be selected as the Primary SIM card in the [[#SIM_Management|SIM Management]] section.|}}
The <b>Network operators</b> section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to. {{#ifeq: {{{dualsim}}} | 1 |Operator selection is only available for the primary SIM card. In order to specify an operator for the other SIM card it must first be selected as the Primary SIM in the [[#SIM_Management|SIM Management]] section.|}}
===Scan For Network Operators===
===Scan For Network Operators===
----
----
<b>Scan For Network Operators</b> is a function that initiates a scan for mobile network operators available in your area. To initiate a scan, press the 'Scan for operators' button. After you do, you will be prompted with a pop-up asking if you wish to proceed. This is because while the scan is in progress you will lose your data connection for approximately 2 minutes.
<b>Scan For Network Operators</b> is a function that initiates a scan for mobile network operators available in your area. To initiate a scan, press the 'Scan for operators' button.
[[File:{{{file_network_operators_scan}}}]]
[[File:Networking_rut_manual_mobile_network_operators_scan_for_operators.png|border|class=tlt-border]]
After this you will be prompted by a pop-up asking if you wish to proceed. This is because while the scan is in progress you will lose your data connection for approximately 2 minutes so, please take that into account.
[[File:Networking_rut_manual_mobile_network_operators_scan_for_operators_confirmation.png]]
After the scan is complete you will be presented with a list of operators available in your area. The list provides such information as operator's name, code and network access type. You can also choose to which operator you would like to connect provided that the operator's status is not <i>Forbidden</i>.
After the scan is complete you will be presented with a list of operators available in your area. The list provides such information as operator's name, code and network access type. You can also choose to which operator you would like to connect provided that the operator's status is not <i>Forbidden</i>.
[[File:Networking_rut_manual_mobile_network_operators_settings_dualsim_{{{dualsim}}}.png|border|class=tlt-border]]
----
----
The 'Connection mode' box specifies the logic of how the router will connect to operators:
The 'Connection mode' specifies the logic of how the router will connect operators:
<ul>
<ul>
===Operators List===
===Operators List===
----
----
The <b>Operators List</b> section is used for creating a blacklist or whitelist for undesired or desired operators. Please note that when using either Whitelist mode or Blacklist mode, you will initially lose your mobile connection for several minutes. Also if you have your SIM card set to switch "On network denied", your SIM card may switch when using Blacklist mode
The <b>Operators List</b> section is used to create a blacklist or whitelist for undesired or desired operators. Please note that when using either Whitelist mode or Blacklist mode, you will initially lose your mobile connection for several minutes. Also if you have your SIM card set to switch "On network denied", your SIM card may switch when using Blacklist mode.
[[File:Networking_rut_manual_mobile_network_operators_operator_list_operator_list_settings.png|border|class=tlt-border]]
[[File:{{{file_operator_list_settings}}}]]
<table class="nd-mantable">
<table class="nd-mantable">
</tr>
</tr>
</table>
</table>
----
The list itself is empty by default. Click the 'Add' button to create a new entry in the list.
[[File:{{{file_operator_list}}}]]
[[File:Networking_rut_manual_mobile_network_operators_operator_list_operator_list_add_button.png|border|class=tlt-border]]
The newly added entry should look similar to this:
[[File:Networking_rut_manual_mobile_network_operators_operator_list_operator_list.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
</tr>
</tr>
</table>
</table>
<b>Important</b>: be mindful when using the Operators List function as it very easy to block yourself from the right operators and lose your data connection.
<b>Important</b>: be mindful when using the Operators List function as it very easy to block yourself from the right operators and lose your data connection.
