31,703
edits
Changes
Template:Networking rut manual mobile (view source)
Revision as of 08:24, 16 September 2020
, 08:24, 16 September 2020no edit summary
The <b>Data Connection Limit Configuration</b> section is used to configure custom mobile data limits for your SIM card(s). When the mobile data limit set for the SIM card(s) is reached, the router will no longer use the mobile connection to establish a data connection until the limit period is over or the limit is reset by the user.
The <b>Data Connection Limit Configuration</b> section is used to configure custom mobile data limits for your SIM card(s). When the mobile data limit set for the SIM card(s) is reached, the router will no longer use the mobile connection to establish a data connection until the limit period is over or the limit is reset by the user.
[[File:{{{file_data_limit_configuration}}}]]
[[File:Networking_rut_manual_mobile_mobile_data_limit_dualsim_1.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
The <b>SMS Warning Configuration</b> section provides you with the possibility to configure a rule that sends you an SMS message after the router's SIM card(s) uses a specified amount of mobile data.
The <b>SMS Warning Configuration</b> section provides you with the possibility to configure a rule that sends you an SMS message after the router's SIM card(s) uses a specified amount of mobile data.
[[File:{{{file_data_limit_warning}}}]]
[[File:Networking_rut_manual_mobile_mobile_data_limit_sms_warning.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<td>Enable SMS warning</td>
<td>Enable SMS warning</td>
<td>yes | no; default: <b>no</b></td>
<td>yes | no; default: <b>no</b></td>
<td>Toggles SMS warning On or OFF</td>
<td>Turns SMS warning on or off.</td>
</tr>
</tr>
<tr>
<tr>
<td>Data limit* (MB)</td>
<td>Data limit* (MB)</td>
<td>integer; default: <b>none</b></td>
<td>integer; default: <b>none</b></td>
<td>The received data limit before sending an SMS warning. After reaching using the the amount of data specified in this field, the router will send an SMS warning message to the specified phone number.</td>
<td>The received data limit that will trigger the sending of an SMS warning.</td>
</tr>
</tr>
<tr>
<tr>
<td>Period</td>
<td>Period</td>
<td>Month | Week | Day; default: <b>Month</b></td>
<td>Month | Week | Day; default: <b>Month</b></td>
<td>Period to which the data limit applies to.</td>
<td>Period to which the SMS warning data limit applies to.</td>
</tr>
</tr>
<tr>
<tr>
<td>Phone number</td>
<td>Phone number</td>
<td>phone number; default: <b>none</b></td>
<td>phone number; default: <b>none</b></td>
<td>Recipient's phone numbers</td>
<td>Recipient's phone numbers.</td>
</tr>
</tr>
</table>
</table>
The <b>Clear Data Limit</b> section contains only one button - 'Clear data limit'. When clicked, the button resets the data limit counter for the related SIM card. Thus, the count is started over again regardless of the specified period.
The <b>Clear Data Limit</b> section contains only one button - 'Clear data limit'. When clicked, the button resets the data limit counter for the related SIM card. Thus, the count is started over again regardless of the specified period.
[[File:{{{file_data_limit_clear}}}]]
[[File:Networking_{{lc:{{{{series}}}}}_manual_mobile_mobile_data_limit_clear_data_limit.png|border|class=tlt-border]]
<b>Important</b>: remember that the 'Clear data limit' button doesn't clear the actual data usage statistics for the SIM card, only the data counters as calculated by the router.
<b>Important</b>: remember that the 'Clear data limit' button doesn't clear the actual data usage statistics for the SIM card, only the data counters as calculated by the router.
The <b>SMS Limit Configuration</b> section is used to configure custom SMS limits for your SIM card(s). In order to limit sent SMS messages, select the SIM card (SIM1 or SIM2), enable SMS limit and configure the limit conditions. For related information, refer to the figure and table below.
The <b>SMS Limit Configuration</b> section is used to configure custom SMS limits for your SIM card(s). In order to limit sent SMS messages, select the SIM card (SIM1 or SIM2), enable SMS limit and configure the limit conditions. For related information, refer to the figure and table below.
[[File:{{{file_sms_limit_config}}}]]
[[File:Networking_rut_manual_mobile_sms_limit_configuration_dualsim_{{{dualsim}}}.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
The <b>Clear SMS Limit</b> section displays the amount of sent SMS messages and provides the possibility to reset that counter. When the 'Clear SMS button' is clicked, it clears the SMS limit counter for the related SIM card. Thus, the count is started over again regardless of the specified period.
The <b>Clear SMS Limit</b> section displays the amount of sent SMS messages and provides the possibility to reset that counter. When the 'Clear SMS button' is clicked, it clears the SMS limit counter for the related SIM card. Thus, the count is started over again regardless of the specified period.
[[File:{{{file_sms_limit_clear}}}]]
[[File:Networking_rut_manual_mobile_sms_limit_clear_sms_limit.png|border|class=tlt-border]]
<b>Important</b>: remember that the 'Clear SMS limit' button doesn't clear the actual sent SMS statistics for the SIM card, only the SMS counters as calculated by the router.
<b>Important</b>: remember that the 'Clear SMS limit' button doesn't clear the actual sent SMS statistics for the SIM card, only the SMS counters as calculated by the router.
|}}{{#ifeq: {{{dualsim}}} | 1 |
|}}{{#ifeq: {{{dualsim}}} | 1 | <h2>SIM Idle Protection</h2>
Some operators block user SIM cards after a period of inactivity. The <b>SIM Idle Protection</b> tab provides you with the possibility to configure the router to periodically switch to the secondary SIM card and establish a data connection with a mobile network operator in order to break the idleness and prevent the SIM card from being blocked.
Some operators block user SIM cards after a period of inactivity. The <b>SIM Idle Protection</b> tab provides you with the possibility to configure the router to periodically switch to the secondary SIM card and establish a data connection with a mobile network operator in order to break the idleness and prevent the SIM card from being blocked.
The <b>Settings</b> tab is used to configure the parameters used by the SIM Idle Protection function. Refer to the figure and table below for more information.
The <b>Settings</b> tab is used to configure the parameters used by the SIM Idle Protection function. Refer to the figure and table below for more information.
[[File:{{{file_sim_idle_settings}}}]]
[[File:Networking_rut_manual_sim_idle_protection_configuration.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
Once you have configured the SIM Idle Protection settings, you can use the <b>Test</b> section to test these settings to make sure everything works correctly. Once you click the 'Test' button, the SIM Idle Protection test will initiate. The test is designed to simulate SIM Idle Protection according to your current SIM Idle Protection settings.
Once you have configured the SIM Idle Protection settings, you can use the <b>Test</b> section to test these settings to make sure everything works correctly. Once you click the 'Test' button, the SIM Idle Protection test will initiate. The test is designed to simulate SIM Idle Protection according to your current SIM Idle Protection settings.
[[File:{{{file_sim_idle_test}}}]]
[[File:Networking_rut_manual_sim_idle_protection_test.png|border|class=tlt-border]]
----
----
The test takes about 2 minutes, so make sure the router isn't doing anything important before you start the test because during it you will lose connectivity. It is very important to <b>wait for the test to finish before commiting any actions</b>. Commiting actions on the router during test phase you may cause the router to crash.
The test takes about 2 minutes, so make sure the router isn't doing anything important before you start the test because during it you will lose connectivity. It is very important to <b>wait for the test to finish before commiting any actions</b>. Commiting actions on the router during test phase you may cause the router to crash.
|}}
|}}
{{#ifeq:{{{name}}}|RUT955|{{Template:Networking_rut9xx_manual_mobile_usb_modem|file_usb_modem ={{{file_usb_modem}}}}}|}}
{{#ifeq: {{{usb}}} | 1 | <h2>USB Modem</h2>
The <b>USB Modem</b> section is used to configure the connection settings of a USB modem attached to the router's USB connector. This section only becomes visible when a USB modem is connected to the router.
The configuration is a minimalistic version of the regular SIM card settings page:
[[File:Networking_rut_manual_mobile_usb_modem.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>APN</td>
<td>string; default: <b>none</b></td>
<td>An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network. Depending on the contract, some operators may require you to use an APN just to complete the registration on a network. In other cases, APN is used to get special parameters from the operator (e.g., a [[Private_and_Public_IP_Addresses#Public_IP_address|public IP address]]) depending on the contract.<br>The check mark on the right side of the APN field enables the <i>Auto APN</i> feature. Auto APN sets the APN value automatically based on your provider and country.<br>An APN Network Identifier cannot start with any of the following strings:
<ul>
<li>rac;</li>
<li>lac;</li>
<li>sgsn;</li>
<li>rnc;</li>
</ul>it cannot end in:
<ul>
<li>.gprs;</li>
</ul>and it cannot contain the asterisk symbol (<b>*</b>).
</td>
</tr>
<tr>
<td>PIN number</td>
<td>string; default: <b>none</b></td>
<td>A 4-digit long numeric password used to authenticate the modem to the SIM card.</td>
</tr>
<tr>
<td>Authentication method</td>
<td>CHAP | PAP | None; default: <b>None</b></td>
<td>Authentication method that your GSM carrier uses to authenticate new connections on its network. If you select PAP or CHAP, you will also be required to enter a username and password.</td>
</tr>
<tr>
<td>Service mode</td>
<td>2G only | 2G preferred | 3G only | 3G preferred | 4G (LTE) only | 4G (LTE) preferred | Automatic; default: <b>4G (LTE) preferred</b></td>
<td>Your service mode preference. If your local mobile network supports 2G, 3G and 4G (LTE), you can specify to which type of network you wish to connect to. For example, if you choose 2G only, the router will connect to a 2G network, so long as it is available, otherwise it will connect to a network that provides better connectivity. If you select Automatic, then the router will connect to the network that provides the best connectivity.</td>
</tr>
</table>
To select the USB modem to act as a WAN connection, go to the <b>Network → [[RUT955 WAN|WAN]]</b> page.
<b>[[How to set up a USB modem|Click here]]</b> for step-by-step instructions on USB modem setup.
|}}
[[Category:{{{name}}} Network section]]
[[Category:{{{name}}} Network section]]
