Changes

DNP3 Protocol contains two features. ‘TCP MASTER’ and ‘DNP3 OUTSTATION’.

DNP3 Protocol contains two features. ‘TCP MASTER’ and ‘DNP3 OUTSTATION’.

'''TCP MASTER'''

==TCP MASTER==

TCP Master requests specific information from DNP3 outstation through the communication channel.

TCP Master requests specific information from DNP3 outstation through the communication channel.

To setup TCP MASTER click on the TCP Master Button and click ‘ADD’ to add a new master.

To setup TCP MASTER click on the TCP Master Button and click ‘ADD’ to add a new master.

'''DNP3 OUTSTATION'''

==DNP3 OUTSTATION==

A DNP3 Outstation component communicates with a single master via a communication channel.

A DNP3 Outstation component communicates with a single master via a communication channel.

'''NOTE: Th'''e Local Address and the Remote Address configuration in TCP Master and DNP3 Outstation are configured in reverse such that the Local address in TCP Master is the Remote address in the DNP3 Outstation and vice versa.

'''NOTE: Th'''e Local Address and the Remote Address configuration in TCP Master and DNP3 Outstation are configured in reverse such that the Local address in TCP Master is the Remote address in the DNP3 Outstation and vice versa.

'''TESTING DNP3'''

==TESTING DNP3==

To test DNP3 protocol set up an account with the [https://beeceptor.com/ beeceptor] and create an endpoint.

To test DNP3 protocol set up an account with the [https://beeceptor.com/ beeceptor] and create an endpoint.