505
edits
Changes
Template:Networking tsw2xx manual powering options (view source)
Revision as of 16:51, 28 November 2022
, 16:51, 28 November 2022no edit summary
While the device is designed to accept input voltage of up to 57 VDC peaks, high voltage power supplies can harm the device. If you want to use high voltage power supplies it is recommended to also use additional safety equipment to suppress voltage peaks from the power supply.
While the device is designed to accept input voltage of up to 57 VDC peaks, high voltage power supplies can harm the device. If you want to use high voltage power supplies it is recommended to also use additional safety equipment to suppress voltage peaks from the power supply.
{{#ifeq:{{{poe}}}|1|<b>Note</b> that {{{name}}} PoE ports works properly when switch is powered using PSU, which can supply 44 VDC or higher voltages. If {{{name}}} switch is powered with voltages ranging from 7 VDC to 43 VDC, it will work as standard switch, without PoE capabilities.|}}
{{#ifeq:{{{poe}}}|1|<b>Note</b> that {{{name}}} PoE ports works properly when switch is powered using PSU, which can supply 44 VDC or higher voltages. If {{{name}}} switch is powered with voltages ranging from 7 VDC to 43 VDC, it will work as standard switch, without PoE capabilities.
==Disclaimer: {{{name}}} and Passive PoE devices==
There are a couple of options to stay safe when using TSW100 '''Active PoE''' with devices that only support '''Passive PoE''':
* Connect {{{name}}} and Passive PoE device only via non-PoE Ethernet ports (for example, '''do not''' use TSW100 PoE ports with '''LAN1''' ports on Teltonika devices).
* If there is a need to use '''LAN1''' port on the end device, make sure that {{{name}}} and the end device are '''powered from different voltage sources''' (for example, power both devices from different PSUs, or different batteries).
|}}
[[Category:{{{name}}} Manual]]
[[Category:{{{name}}} Manual]]
