Changes

There are a couple of options to stay safe when using TSW100 '''Active PoE''' with devices that only support '''Passive PoE''':

There are a couple of options to stay safe when using TSW100 '''Active PoE''' with devices that only support '''Passive PoE''':

* Connect {{{name}}} and Passive PoE device only via non-PoE Ethernet ports (for example, '''do not''' use TSW100 PoE ports with '''LAN1''' ports on Teltonika devices).

* Connect {{{name}}} and Passive PoE device only via non-PoE Ethernet ports (for example, '''do not''' use {{{name}}} PoE ports with '''LAN1''' ports on Teltonika devices).

* If there is a need to use '''LAN1''' port on the end device, make sure that {{{name}}} and the end device are '''powered from different voltage sources''' (for example, power both devices from different PSUs, or different batteries).

* If there is a need to use '''LAN1''' port on the end device, make sure that {{{name}}} and the end device are '''powered from different voltage sources''' (for example, power both devices from different PSUs, or different batteries).

|}}

|}}

[[Category:{{{name}}} Manual]]

[[Category:{{{name}}} Manual]]