Product change notifications (PCN) is a way of informing customers of upcoming changes related to Teltonika Networks products. This includes outward appearance adjustments, hardware improvements, changes to package contents, etc. Changes related to a product's firmware are not included in PCNs (click here to see the firmware changelog).
This page stores information regarding changes to the TAP100 device. Below you will find a list of both upcoming and already implemented changes sorted by newest to oldest (top to bottom).
2025.04.23: Default password change
All TAP100 devices manufactured starting from Q2 2025, will have unique default password.
Change description
Change type
Default password change
Detailed description
TAP100 devices manufactured starting from Q2 2025 will have a unique default password to ensure compliance with security requirements. Please note that this change will be implemented gradually throughout a 3-month transitional period.
Change reasons
Increasing device security
Affected products information
Model
Affected order codes
Order code changes
TAP100
TAP100 ******
No changes
Upcoming change date
Q2 2025
Change impact
Risk assessment
Device install procedures or any automated solutions might need modifications. Please note: this product change notification does not affect any previous TAP100 devices.
Suggested implementation plan
For more detailed information please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above
To download the pdf version of this notification, click here.
2025.04.22: Transition to HTTPS protocol RutOS 7.15
With the release of RutOS version 7.15 in Q2 2025, TAP100 devices will disable the HTTP protocol and enable HTTPS Redirect by default to enhance WebUI and API communication security.
With the release of RutOS version 7.15 firmware, the device's WebUI and API default communication methods will change. The HTTP protocol will be changed to HTTPS (only) in default configuration for security reasons and complying with security standards. The "HTTPS Redirect" functionality will be enabled by default so all HTTP requests will be automatically redirected through the HTTPS channel.
Change reasons
To enhance security measures and comply with security standards by eliminating unsecured HTTP protocol usage.
Affected products information
Model
Affected order codes
Order code changes
TAP100
All
No changes
Upcoming change date
Q2 2025
Change impact
Risk assessment
Users may receive a browser warning indicating that the connection is not secure due to the use of a self-signed certificate in HTTPS.
API users may experience issues depending on the tools they use to communicate with the API, as some may not support HTTPS, self-signed certificates or the tooling may have to be reconfigured to adapt to these changes.
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes. URL1URL2 For more detailed information, please contact your sales representative.
API users should update their tools and scripts to support HTTPS communication and handle self-signed certificates.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification, Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the PDF version of this notification, click here.
2025.02.25: Mobile and I/O POST/GET Service Removal with RutOS 7.14
With the release of RutOS version 7.14, support for the TAP100 POST/GET service will be discontinued to enhance security while maintaining device functionality through alternative methods.
With the introduction of RutOS 7.14, the Mobile POST/GET and I/O POST/GET services will be removed from the firmware and will no longer be available in the package manager. These legacy services had security concerns, and their removal ensures a more robust security framework for the device. However, users will still be able to achieve the same functionalities using the device's API, which provides a more secure and efficient way to interact with the system.
Change reasons
Enhanced Security: Removing these services mitigates potential security risks and improves overall system integrity.
Improved API Support: Users can leverage the API for secure and flexible data handling without relying on deprecated methods.
The change aligns with modern security protocols and best practices in remote device management.
Affected products information
Model
Affected order codes
Order code changes
TAP100
TAP100 ******
No changes
Upcoming change date
2025 Q2, with the release of RutOS 7.14
Change impact
Risk assessment
Clients using Mobile POST/GET and I/O POST/GET services will need to transition to API-based methods.
Some automation processes relying on these legacy services may require reconfiguration
API documentation and support resources will be available to facilitate a smooth transition.
Suggested implementation plan
Test API-based interactions before the transition to ensure compatibility.
Information included in this PCN will help adapt to the upcoming changes. For more detailed information, please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the pdf version of this notification, click here.
2025.02.24: Implementation of Read-Only System Files in RutOS 7.14
With the release of RutOS version 7.14 in Q2 2025, in TAP100 devices will implement read-only permissions for critical system files by default. The new read-only configuration ensures a more secure and stable environment, though it may affect those who perform non-standard operations.
With the release of RutOS version 7.14, the device’s critical system files will become read-only by default. This prevents unauthorized or accidental modifications that could damage the system’s integrity. Standard users operating within typical parameters should not be affected, while those who rely on direct file alterations will need to adjust their workflows. Custom firmware options are expected to allow reverting to a more flexible configuration if required.
Change reasons
To maintain system integrity, enhance reliability, and prevent unintended damage to core files.
Affected products information
Model
Affected order codes
Order code changes
TAP100
TAP100 ******
No changes
Upcoming change date
Q2 2025
Change impact
Risk assessment
Customers performing direct system-level modifications may need to adjust their procedures.
Standard end-users, who do not rely on altering critical system files, are unlikely to be affected.
Custom firmware solutions can restore file-level flexibility if required.
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes. For more detailed information, please contact your sales representative.
Review current workflows and identify any reliance on direct system file modifications. Consider using custom firmware builds if continued system-level customization is necessary.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification, Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the PDF version of this notification, click here.
2025.02.20: WebUI Mode Update with RutOS 7.13
With the release of RutOS version 7.13, TAP100 the WebUI will undergo changes to enhance user experience and accessibility.
PCN Number: PCN_RUTOS_CHANGE_TAP100_2025_02_20_EN
Change description
Change type
Firmware change
Detailed description
Previously, the WebUI provided two separate modes: Basic Mode and Advanced Mode. With the introduction of RutOS 7.13, these two modes will be merged into a unified interface, where users will have access to all settings within one mode.
Change reasons
Improved Usability: A single mode simplifies navigation and enhances user-friendliness.
Increased Accessibility: All essential settings remain available without needing to switch between modes.
Optimized User Experience: A streamlined design enhances efficiency and ease of use.
User-Driven Enhancement: This change is based on user feedback, aiming to create a more intuitive and accessible WebUI experience.
Affected products information
Model
Affected order codes
Order code changes
TAP100
TAP100 ******
No changes
Upcoming change date
2025 Q2, with the release of RutOS 7.13
Change impact
Risk assessment
Users accustomed to switching between Basic and Advanced Mode may require time to adapt to the unified interface.
Settings will now be presented in a single, continuous view rather than separated into different modes.
Minor learning curve for users transitioning from previous WebUI versions.
Suggested implementation plan
Review the unified WebUI mode and familiarize yourself with having all settings available.
Refer to the updated user documentation and support resources for guidance.
Information included in this PCN will help adapt to the upcoming changes. For more detailed information, please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the pdf version of this notification, click here.
2024.10.25: QSG flyer replacement
Starting in 2024 Q4 TAP100 devices will come with a new QSG flyer in the packaging.
Change description
Change type
Replacement of QSG flyer
Detailed description
TAP100 devices manufactured starting from 2024 Q4 will have a new QSG flyer in the packaging. The new TAP100 QSG flyer will be smaller in size 90 x 80 mm (unfolded 270 x 80), than previous QSG version 140 x 140 mm (unfolded 280 x 140 mm).
Previous design:
New design:
The new QSG flyer will fold into three panels; the previous version folded into two panels.
Change reasons
Design improvement
Affected products information
Model
Affected order codes
Order code changes
TAP100
TAP100 ******
No changes
Upcoming change date
2024 Q4
Change impact
Risk assessment
Marketing material such as photos might need replacing.
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above
To download the pdf version of this notification, click here.
2024.09.18: EAN Code Change
Starting from October 1st 2024, new order codes created will have their own unique EAN codes.
The product identification system is being updated by assigning unique EAN codes to each new order code created from October 1st.
Change reasons
Improving product traceability, inventory management, and logistics accuracy across ordering and distribution systems.
Affected products information
Model
Affected order codes
Order code changes
TAP100
TAP100 *****
No changes
Upcoming change date
October 1st, 2024
Change impact
Risk assessment
Every order code, created after this change, will have its own unique EAN code. Therefore, it might cause the need to review inventory management and ordering processes.
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes. For more detailed information, please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the pdf version of this notification, click here.
With the release of RutOS version 7.07, TAP100 device will experience changes related to the security improvements of the device.
PCN Number: PCN_RUTOS_CHANGE_2024_03_08_EN
Change description
Change type
Firmware change
Detailed description
Previously, during device resets, logs and RMS connection state data remained unchanged. However, starting with RutOS firmware version 7.07, all devices will uniformly reset logs and RMS connection state data to factory defaults when using the reset button. Other reset methods will remain unimpacted by this change.
Change reasons
Increasing security
Affected products information
Model
Affected order codes
Order code changes
TAP100
TAP100 *****
No changes
Upcoming change date
2024 Q2, with the release of RutOS 7.07
Change impact
Risk assessment
The loss of device logs upon utilizing the reset button may disrupt operational records and slow down subsequent troubleshooting efforts.
The device is still visible in RMS post-reset but cannot be accessed. Therefore, re-adding the device to RMS is necessary for continued access.
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes. For more detailed information, please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the pdf version of this notification, click here.
2023.08.03: Product packaging changes
Starting from Q3 2023 TAP100 product packaging will be changed.
Change description
Change type
Packaging
Detailed description
Starting from Q3 2023 TAP100 polyurethane foam insert will be replaced by honeycomb insert made from cardboard.
Current design:
Updated packaging design:
Packaging dimensions will not change.
Change reasons
This change will improve structural stability, enhance impact resistance, and reduce environmental impact.
Affected products information
Model
Current order code
New order code
TAP100
TAP100 ******
No changes
Upcoming change date
2023 Q3
Change impact
Risk assessment
The product handling and storage process may require review. Marketing materials, such as photos, might need replacement.
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes. For more detailed information please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the pdf version of this notification, click here.
2023.08.03: QSG flyer replacement
Starting in Q3 of 2023, TAP100 routers will come with a new QSG flyer in the packaging.
Change description
Change type
Replacement of QSG flyer
Detailed description
TAP100 devices manufactured starting from Q3 2023 will have a new QSG flyer in the packaging. The new QSG flyer includes multiple languages, English, German, Spanish, French, Italian, the short version of QSG with a QR code/link to the full Web QSG version: teltonika-networks.com/QSG_TAP100
Previous design:
New design:
The new flyer will include QR codes with URL links to RMS and the Web version of the QSG (Quick Start Guide) for the TAP100.
Change reasons
Introducing additional languages.
Affected products information
Model
Affected order codes
Order code changes
TAP100
TAP100 ******
No changes
Upcoming change date
2023, Q3
Change impact
Risk assessment
Marketing material such as photos might need replacing.
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above
To download the pdf version of this notification, click here.
2023.08.02: Product packaging changes
Starting from 2023 Q3 TAP100 product packaging will be changed.
Change description
Change type
Packaging
Detailed description
The packaging for the product will undergo several updates including an update to the side print of the box. Additionally, the box will now feature press with certificates that will be printed according to the region. Finally, there will also be changes made to the company information section including the address, telephone number, email and website link.
Current design:
Updated packaging design:
Packaging dimensions will not change.
Change reasons
Design improvement.
Affected products information
Model
Affected order codes
Order code changes
TAP100
TAP100 *****
No changes
Upcoming change date
2023 Q3
Change impact
Risk assessment
The product handling and storage process may require review. Marketing materials, such as photos, might need replacement.
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes. For more detailed information, please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above
To download the pdf version of this notification, click here.
