Template:Rms manual management commands update fw

From Teltonika Networks Wiki
This is the approved revision of this page, as well as being the most recent.

To Update firmware firmware for device(s) selected from your device table go to the RMS web page, Left sidebar panel, (Management → Devices) and click on Devices submenu.

Move your mouse pointer to the Top control Actions menu and select Update firmware (Actions → Update firmware).

RMS-device-menu-left-sidebar-panel.jpg RMS-top-menu-actions-update-firmware.jpg


Step by step instructions


Read step by step instructions to learn how to update firmware for your device(s).

  1. Select the device(s) that you wish to update
  2. Move your mouse pointer to the Actions menu and click "Update firmware".
  3. After a pop-up window will appear. Select the Latest firmware or Mass product from the top of the list. You also can select the firmware you have previously uploaded.
  4. Click the Set update button, you will get a pop-up window showing firmware upload progress.
  5. After the firmware upload has complete in the Status column you will you will get a message: Done.
  6. You can safely close the pop-up window by clicking Close button.

Important!

  • Allow some time for your device(s) to update. They wont be reachable for up to 1-2 minute(s).
  • When the red circle (Offline) will change to green circle (Online) the device(s) have been updated and now are fully operational.

Your device(s) will be unreachable for a few minutes and will thus be shown as "Offline". The power button symbols located next to each device in the device table indicate the monitoring status of these devices. When it turns green, the firmware updates will have finished and the device(s) will be seen as "Online" in RMS.

Download firmware manually


Firmware files can be uploaded to RMS via the RMS Files page or they can uploaded from your computer. You can download firmware for different devices from these links: