Difference between revisions of "RUT230 NTP"

From Teltonika Networks Wiki
Line 1: Line 1:
==Summary==
+
{{Template: Networking_rutxxx_manual_ntp
 
+
<!------------DEVICE DETAILS-------------->
'''Network Time Protocol (NTP)''' is a networking protocol for clock synchronization between computer systems over packet-switched, variable-latency data networks. This chapter is an overview of the NTP service section of [[Network products|RUTxxx routers]].
+
| name              = RUT230
 
+
| fw_version        = RUT2XX_R_00.01.07.1
==General==
+
| gps              = 0
 
+
<!---------------GENERAL------------------>
The '''Time Synchronization''' section is used to configure general router time settings, like selecting the local time zone, setting a time update interval, synchronizing the time, etc.
+
| file_general      = Networking_rutxxx_manual_ntp_general_v1.png
 
+
| file_ntp_server  = Networking_rutxxx_manual_ntp_ntp_server_v1.png
[[File:Services ntp general v2.png]]
+
<!--------------TIME SERVERS-------------->
 
+
| file_time_servers = Networking_rutxxx_manual_ntp_time_servers_v1.png
<table class="nd-mantable">
+
}}
    <tr>
 
        <th>field name</th>
 
      <th>value</th>
 
      <th>description</th>
 
    </tr>
 
    <tr>
 
      <td>Current system time</td>
 
      <td>time; Default: '''current time'''</td>
 
      <td>Current local time of the router</td>
 
    </tr>
 
    <tr>
 
      <td>Time zone</td>
 
      <td>time zone; Default: '''UTC'''</td>
 
      <td>Time zone of the country where the router is located</td>
 
    </tr>
 
    <tr>
 
    <td>Enable NTP</td>
 
        <td>yes | no; Default: '''no'''</td>
 
        <td>SO/IEC 3166 alpha2 country codes as defined in ISO 3166-1 standard</td>
 
    </tr>
 
    <tr>
 
    <td>Force servers</td>
 
        <td>yes | no; Default: '''yes'''</td>
 
        <td>Forces unreliable NTP servers</td>
 
    </tr>
 
    <tr>
 
      <td>Update interval (in seconds)</td>
 
      <td>integer; Default: '''3660'''</td>
 
      <td>How often the router updates systems time </td>
 
    </tr>
 
    <tr>
 
      <td>Save time to flash</td>
 
      <td>yes | no; Default: '''yes'''</td>
 
      <td>Saves last synchronized time to flash memory</td>
 
    </tr>
 
    <tr>
 
    <td>Count of time synchronizations</td>
 
        <td>integer; Default: " "</td>
 
        <td>Total amount of times that router will do the synchronization.<br>
 
'''NOTE:''' If left blank - the count will be infinite</td>
 
    </tr>
 
    <tr>
 
    <td>GPS synchronization</td>
 
        <td>yes | no; Default: '''no'''</td>
 
        <td>Enables periodic time synchronization of the system using the GPS module (does not require internet connection)</td>
 
    </tr>
 
    <tr>
 
      <td>Offset frequency</td>
 
      <td>integer; Default: '''0'''</td>
 
      <td>Adjusts the minor drift of the clock so that it will run more accurately</td>
 
    </tr>
 
    <tr>
 
      <td>Button: Sync with GPS</td>
 
      <td>-</td>
 
      <td>Synchronizes the router's time with your GPS time</td>
 
    </tr>
 
    <tr>
 
    <td>Button: Sync with browser</td>
 
        <td>-</td>
 
        <td>Synchronizes the router's time with your browser's time</td>
 
    </tr>
 
</table>
 
 
 
==NTP Server==
 
 
 
The router can also act as an '''NTP Server''', providing clock synchronization to other devices in the network. From this section you can turn this feature ON or OFF.
 
 
 
[[File:Services ntp general ntp server.png]]
 
 
 
==Time Servers==
 
 
 
The '''Time Servers''' section displays the time servers that the router uses. You are provided with 4 default time servers (as seen in the example below), but you can also add custom time servers by clicking the "Add" button or you can edit the given time servers.
 
 
 
[[File:Services ntp time servers v2.png]]
 
 
 
[[Category:RUT230 WebUI]]
 

Revision as of 11:08, 13 June 2019

Main Page > RUT Routers > RUT230 > RUT230 Manual > RUT230 WebUI > RUT230 Services section > RUT230 NTP