RUT850 VPN: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
No edit summary
 
(4 intermediate revisions by 2 users not shown)
Line 1: Line 1:
==Summary==
{{Template: Networking_rut850_manual_vpn
<!----------------------------DEVICE DETAILS---------------------------->
| name                              = RUT850
| fw_version                        = RUT850_R_00.01.03.4
<!--------------------------------OPENVPN------------------------------->
| file_openvpn_client_config        = Networking_rutxxx_vpn_openvpn_client_configuration_v2.png
| file_openvpn_server_config        = Networking_rutxxx_vpn_openvpn_server_configuration_v2.png
| file_openvpn_tls_clients_config  = Networking_rutxxx_vpn_openvpn_tls_clients_configuration_v2.png
<!---------------------------------IPsec-------------------------------->
| file_ipsec_config                = Networking_rut850_vpn_ipsec_ipsec_configuration_v1.png
| file_ipsec_phase                  = Networking_rutxxx_vpn_ipsec_ipsec_configuration_phase_v2.png
| file_ipsec_main_mode              = Networking_device_vpn_ipsec_main_mode_scheme_v3.png
| file_ipsec_aggressive_mode        = Networking_device_vpn_ipsec_aggressive_mode_scheme_v4.png
<!---------------------------------L2TP--------------------------------->
| file_l2tp_client_config          = Networking_rut850_vpn_l2tp_client_configuration_v1.png
| file_l2tp_server_config          = Networking_rutxxx_vpn_l2tp_server_configuration_v1.png
}}


'''Virtual Private Network''' ('''VPN''') is a method for secure data transfer through unsafe public networks. This page is an overview of RUT850 routers' VPN service.
==See also==


==OpenVPN==
* Configuration examples for RUT850 VPN services:
 
** [[OpenVPN configuration examples]]
'''OpenVPN''' is an open-source software application that implements virtual private network (VPN) techniques for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities. This section is an overview of the OpenVPN section of RUT routers. For a more in depth guide refer to our '''[[OpenVPN configuration examples]]''' page.
** [[IPsec configuration examples]]
 
** [[L2TP configuration examples]]
The default OpenVPN Configuration list is empty, so you have to define your own configuration to establish any sort of OpenVPN connection. OpenVPN configurations can have one of two roles: '''client''' or '''server'''. Let’s start with an OpenVPN client. To create it, enter the desired instance name in the '''New configuration name''' field, select the instance’s role from the '''Role''' list and press the '''Add New''' button.
* Configuration examples for third party VPN services
 
** [[expressvpn.com VPN configuration|expressvpn.com]]
[[Image:Services vpn openvpn creation.PNG]]
** [[vpngate.net VPN configuration|vpngate.net]]
 
** [[Vpnbook.com VPN configuration|vpnbook.com]]
Once you’ve added a new OpenVPN instance there is no need to press the '''Save''' button, since the '''Add New''' button both creates and saves the new instance. By default the instance will be disabled and unconfigured. In order to establish an OpenVPN connection you must Enable your instance, enter an OpenVPN server address, choose an authentication method and a few other things, all of which can be configured in the '''Settings''' window, which can reached by pressing the '''Edit''' button next to your OpenVPN instance (as shown in the figure above).
** [[hide.me VPN configuration|hide.me]]
 
* Other related examples:
===OpenVPN Client===
** [[How to generate TLS certificates (Windows)?]]
----
** [[L2TP over IPsec]]
This section is overview of OpenVPN Client configuration.
** [[OpenVPN traffic split]]
 
** [[OpenVPN client on Windows]]
[[File:Services vpn openvpn client v 2.png]]
 
The figure above is an example of a configured OpenVPN Client instance that uses the UDP protocol and TLS/Password authentication. Comprehensible explanations on how to configure each field are presented in the table below.
 
<table class="nd-mantable">
    <tr>
        <th>field name</th>
      <th>value</th>
      <th>description</th>
    </tr>
    <tr>
      <td>Enable</td>
      <td>yes | no; Default: '''no'''</td>
      <td>Enables the OpenVPN instance</td>
    </tr>
    <tr>
      <td>TUN/TAP</td>
      <td>TUN (tunnel) | TAP (bridged); Default: '''TUN (tunnel)'''</td>
      <td>OpenVPN interface type. '''TUN''' is most often in typical VPN connections, however, '''TAP''' is required in some Ethernet bridging configurations</td>
    </tr>
    <tr>
    <td>Protocol</td>
        <td>UDP | TCP; Default: '''UDP'''</td>
        <td>The transfer protocol used by the OpenVPN connection. '''TCP''' is connection oriented – once a connection is established, data can be sent bidirectionally. '''UDP''' is a simpler, connectionless Internet protocol. '''UDP''' is usually faster but '''TCP''' has more security features. Choose the connection protocol according to your needs.</td>
    </tr>
    <tr>
    <td>Port</td>
        <td>integer [0..65535]; Default: '''1194'''</td>
        <td>TCP/UDP Port number for both local and remote endpoints (make sure that the chosen port is allowed by firewall) </td>
    </tr>
    <tr>
      <td>LZO</td>
      <td>yes | no; Default: '''no'''</td>
      <td>With LZO compression, your VPN connection will generate less network traffic. However, enabling this causes a higher CPU load. Use it carefully with a high traffic rate or low CPU resources</td>
    </tr>
    <tr>
      <td>Encryption</td>
      <td>DES-CBC 64 | RC2-CBC 128 | DES-EDE-CBC 128 | DES-EDE3-CBC 192 | DESX-CBC 192 | BF-CBC 128 | RC2-40-CBC 40 | CAST5-CBC 128 | RC2-40CBC 40 | CAST5-CBC 128 | RC2-64-CBC 64| AES-128-CBC 128 | AES-192-CBC 192 | AES-256-CBC 256 | none; Default: '''BF-CBC 128'''</td>
      <td>Packet encryption algorithm</td>
    </tr>
    <tr>
    <td>Authentication</td>
        <td>TLS | Static Key | Password | TLS/Password; Default: '''TLS'''</td>
        <td>Authentication mode, used to secure data sessions.
'''Static key''' is a secret key used for server–client authentication.
 
'''TLS''' authentication mode uses X.509 type certificates:
 
'''Certificate Authority (CA)''', '''Client certificate''', '''Client key'''.
 
All mentioned certificates can be generated using OpenVPN or Open SSL utilities on any type of host machine.
 
'''Password''' is a simple username/password based authentication where the owner of the OpenVPN server provides the login data.
 
'''TLS/Password''' uses both TLS and Password authentication</td>
    </tr>
    <tr>
    <td>TLS cipher</td>
        <td>all | DHE+RSA | custom; Default: '''all'''</td>
        <td>Packet encryption algorithm cipher</td>
    </tr>
    <tr>
      <td>Remote host / IP address</td>
      <td>ip; Default: " "</td>
      <td>IP address or hostname of an OpenVPN server</td>
    </tr>
    <tr>
      <td>Resolve retry</td>
      <td>integer | infinite; Default: '''infinite'''</td>
      <td>Time in seconds to resolve server hostname periodically in case of first resolve failure before generating service exception</td>
    </tr>
    <tr>
    <td>Keep alive</td>
        <td>integer *space* integer; Default: " "</td>
        <td>Defines two time intervals: one is used to periodically send ICMP request to the OpenVPN server, the other defines a time window, which is used to restart the OpenVPN service, if no ICMP response is received during the window time slice.</td>
    </tr>
    <tr>
    <td>Remote network IP address</td>
        <td>ip; Default: " "</td>
        <td>LAN IP address of the remote network (server)</td>
    </tr>
    <tr>
    <td>Remote network IP netmask</td>
        <td>ip; Default: " "</td>
        <td>LAN IP subnet mask of the remote network (server)</td>
    </tr>
    <tr>
      <td>Username</td>
      <td>string; Default: " "</td>
      <td>User name used for authentication</td>
    </tr>
    <tr>
      <td>Password</td>
      <td>string; Default: " "</td>
      <td>Password name used for authentication</td>
    </tr>
    <tr>
    <td>Extra options</td>
        <td>string; Default: " "</td>
        <td>Extra options to be used by the OpenVPN instance</td>
    </tr>
    <tr>
    <td>HMAC authentication algorithm</td>
        <td>none | SHA1 | SHA256 | SHA384 | SHA512; Default: '''SHA1'''</td>
        <td>HMAC authentication algorithm type</td>
    </tr>
    <tr>
      <td>Additional HMAC authentication</td>
      <td>yes | no; Default: '''no'''</td>
      <td>An additional layer of HMAC authentication on top of the TLS control channel to protect against DoS attacks</td>
    </tr>
    <tr>
      <td>Certificate authority</td>
      <td>.ca file; Default: " "</td>
      <td>Certificate authority is an entity that issues digital certificates. A digital certificate certifies the ownership of a public key by the named subject of the certificate</td>
    </tr>
    <tr>
    <td>Client certificate</td>
        <td>.crt file; Default: " "</td>
        <td>Client certificate is a type of digital certificate that is used by client systems to make authenticated requests to a remote server. Client certificates play a key role in many mutual authentication designs, providing strong assurances of a requester's identity</td>
    </tr>
    <tr>
    <td>Client key</td>
        <td>.key file; Default: " "</td>
        <td>Authenticates the client to the server and establishes precisely who they are</td>
    </tr>
    <tr>
    <td>Private key decryption password (optional)</td>
        <td>string; Default: " "</td>
        <td>Decrypts server private key password. Use only if server's .key file is encrypted with a password</td>
    </tr>
</table>
 
After setting any of these parameters press the '''Save''' button or else the changes will not be applied. Some of the selected parameters will be shown in the configuration list table. You should also be aware of the fact that the router will launch a separate OpenVPN service for every configuration entry (if it is defined as active at the time, of course) so the router has the ability to act as server and client at the same time.
 
===OpenVPN Server===
----
This section is overview of OpenVPN Client configuration.
 
[[Image:Services vpn openvpn server.PNG]]
 
The figure above is an exampled of a configured OpenVPN Server instance that uses the UDP protocol and TLS authentication. As you can see, the configuration is similar to OpenVPN Client but with a few key differences. Comprehensible explanations on how to configure each field are presented in the table below.
 
<table class="nd-mantable">
    <tr>
        <th>field name</th>
      <th>value</th>
      <th>description</th>
    </tr>
    <tr>
      <td>Enable</td>
      <td>yes | no; Default: '''no'''</td>
      <td>Enables the OpenVPN instance</td>
    </tr>
    <tr>
      <td>TUN/TAP</td>
      <td>TUN (tunnel) | TAP (bridged); Default: '''TUN (tunnel)'''</td>
      <td>OpenVPN interface type. '''TUN''' is most often in typical VPN connections, however, '''TAP''' is required in some Ethernet bridging configurations</td>
    </tr>
    <tr>
    <td>Protocol</td>
        <td>UDP | TCP; Default: '''UDP'''</td>
        <td>The transfer protocol used by the OpenVPN connection. '''TCP''' is connection oriented – once a connection is established, data can be sent bidirectionally. '''UDP''' is a simpler, connectionless Internet protocol. '''UDP''' is usually faster but '''TCP''' has more security features. Choose the connection protocol according to your needs.</td>
    </tr>
    <tr>
    <td>Port</td>
        <td>integer [0..65535]; Default: '''1194'''</td>
        <td>TCP/UDP Port number for both local and remote endpoints (make sure that the chosen port is allowed by firewall)</td>
    </tr>
    <tr>
      <td>LZO</td>
      <td>yes | no; Default: '''no'''</td>
      <td>With LZO compression, your VPN connection will generate less network traffic. However, enabling this causes a higher CPU load. Use it carefully with a high traffic rate or low CPU resources</td>
    </tr>
    <tr>
      <td>Encryption</td>
      <td>DES-CBC 64 | RC2-CBC 128 | DES-EDE-CBC 128 | DES-EDE3-CBC 192 | DESX-CBC 192 | BF-CBC 128 | RC2-40-CBC 40 | CAST5-CBC 128 | RC2-40CBC 40 | CAST5-CBC 128 | RC2-64-CBC 64| AES-128-CBC 128 | AES-192-CBC 192 | AES-256-CBC 256 | none; Default: '''BF-CBC 128'''</td>
      <td>Packet encryption algorithm</td>
    </tr>
    <tr>
    <td>Authentication</td>
        <td>TLS'''*''' | Static Key | Password | TLS/Password; Default: '''TLS'''</td>
        <td>Authentication mode, used to secure data sessions.
'''Static key''' is a secret key used for server–client authentication.
 
'''TLS''' authentication mode uses X.509 type certificates:
 
'''Certificate Authority (CA)''', '''Client certificate''', '''Client key'''.
 
All mentioned certificates can be generated using OpenVPN or Open SSL utilities on any type of host machine.
 
'''Password''' is a simple username/password based authentication where the owner of the OpenVPN server provides the login data.
 
'''TLS/Password''' uses both TLS and Password authentication</td>
    </tr>
    <tr>
    <td>TLS cipher</td>
        <td>all | DHE+RSA | custom; Default: '''all'''</td>
        <td>Packet encryption algorithm cipher</td>
    </tr>
    <tr>
      <td>Client to client</td>
      <td>yes | no; Default: '''no'''</td>
      <td>Enables client to client communication in the Virtual network. In order for Client to client to work, the TLS Clients section most be utilized</td>
    </tr>
    <tr>
      <td>Keep alive</td>
      <td>integer *space* integer; Default: " "</td>
      <td>efines two time intervals: one is used to periodically send ICMP request to the OpenVPN server, the other defines a time window, which is used to restart the OpenVPN service, if no ICMP response is received during the window time slice.<br>
'''Example:''' 10 60</td>
    </tr>
    <tr>
    <td>Virtual network IP address</td>
        <td>ip; Default: " "</td>
        <td>IP address of the Virtual network, e.g., '''10.0.8.0'''</td>
    </tr>
    <tr>
    <td>Virtual network IP netmask</td>
        <td>ip; Default: " "</td>
        <td>Subnet mask of the Virtual network</td>
    </tr>
    <tr>
      <td>Push option</td>
      <td>string; Default: " "</td>
      <td>Push options are a way to “push” user defined routes to connecting clients’ routing tables. In the example above, the server will push the route of 192.168.1.0 network with the 255.255.255.0 netmask to connecting clients. Therefore, the client will be able to reach devices in the 192.168.1.0 network. This is useful when a client needs to reach devices located in the OpenVPN server’s LAN. </td>
    </tr>
    <tr>
      <td>Allow duplicate certificates</td>
      <td>yes | no; Default: '''no'''</td>
      <td>If checked, the server allows clients to connect with identical certificates</td>
    </tr>
    <tr>
    <td>Certificate authority</td>
        <td>.ca file; Default: " "</td>
        <td>Certificate authority is an entity that issues digital certificates. A digital certificate certifies the ownership of a public key by the named subject of the certificate </td>
    </tr>
    <tr>
    <td>Server certificate</td>
        <td>.crt file; Default: " "</td>
        <td>Server certificate is a type of digital certificate that is used to identify the OpenVPN server</td>
    </tr>
    <tr>
    <td>Server key</td>
        <td>.key file; Default: " "</td>
        <td>Authenticates clients to the server </td>
    </tr>
    <tr>
    <td>Diffie Hellman parameters</td>
        <td>.pem file; Default: " "</td>
        <td>DH parameters define how OpenSSL performs the Diffie-Hellman (DH) key-exchange. </td>
    </tr>
</table>
 
===TLS Clients===
----
TLS Clients is a way to more specifically differentiate clients by their '''Common Name (CN)''' found in the client certificate file. It can be used to assign specific VPN addresses to specific clients and bind them to their LAN addresses so that other device‘s in the client‘s LAN can be reached from the server or other clients.
 
The TLS Clients section can be found in the OpenVPN Server configuration window, provided that the OpenVPN server uses TLS or TLS/Password authentication methods. To create a new TLS client, type in the new client‘s name in the text field found bellow the TLS Clients tab and press the '''Add''' button.
 
[[Image:Services vpn openvpn tlsclients.PNG]]
 
<table class="nd-mantable">
    <tr>
        <th>field name</th>
      <th>value</th>
      <th>description</th>
    </tr>
    <tr>
      <td>VPN instance name</td>
      <td>string; Default: " "</td>
      <td>With what VPN instance should the TLS Client be associated with</td>
    </tr>
    <tr>
      <td>Endpoint name</td>
      <td>string; Default: " "</td>
      <td>Your endpoint name</td>
    </tr>
    <tr>
    <td>Common name (CN)</td>
        <td>string; Default: " "</td>
        <td>Client’s Common Name (CN) found in the client’s certificate file</td>
    </tr>
    <tr>
    <td>Virtual local endpoint</td>
        <td>ip; Default: " "</td>
        <td>Client’s virtual local address in the virtual network</td>
    </tr>
    <tr>
      <td>Virtual remote endpoint</td>
      <td>ip; Default: " "</td>
      <td>Client’s virtual remote address in the virtual network</td>
    </tr>
    <tr>
    <td>Private network</td>
        <td>ip; Default: " "</td>
        <td>Client’s private network (LAN) IP address</td>
    </tr>
    <tr>
    <td>Private netmask</td>
        <td>ip; Default: " "</td>
        <td>Client’s private network (LAN) IP netmask</td>
    </tr>
</table>
 
[[Category:RUT850 WebUI]]

Latest revision as of 11:56, 2 March 2020

Main Page > EOL Products > RUT850 > RUT850 Manual > RUT850 WebUI > RUT850 Services section > RUT850 VPN

Summary

Virtual Private Network (VPN) is a method of connecting multiple private networks across the Internet. VPNs can serve to achieve many different goals, but some of its main purposes are:

  • access between remote private networks;
  • data encryption;
  • anonymity when browsing the Internet.

The information in this page is updated in accordance with the RUT850_R_00.01.03.4 firmware version.

This page is an overview of different types of VPNs supported by RUT850 routers.

OpenVPN

OpenVPN is an open-source software application that implements virtual private network (VPN) techniques for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities. It is often regarded as being the most universal VPN protocol because of its flexibility, support of SSL/TLS security, multiple encryption methods, many networking features and compatibility with most OS platforms.

RUT850 routers run OpenVPN version 2.4.5.

OpenVPN client

An OpenVPN client is an entity that initiates a connection to an OpenVPN server. To create a new client instance, go to the Services → VPN → OpenVPN section, select Role: Client, enter a custom name and click the 'Add New' button. An OpenVPN client instance with the given name will appear in the "OpenVPN Configuration" list. A maximum of six OpenVPN client instances are allowed to be added.

To begin configuration, click the 'Edit' button next to the client instance. Refer to the figure and table below for information on the OpenVPN client's configuration fields:

Field Value Description
Enable yes | no; default: no Turns the OpenVPN instance on or off.
TUN/TAP TUN (tunnel) | TAP (bridged); default: TUN (tunnel) Virtual network device type.
  • TUN - a virtual point-to-point IP link which operates at the network layer (OSI layer 3), used when routing is required.
  • TAP - a virtual Ethernet adapter (switch), operates at the data link layer (OSI layer 2), used when bridging is required.
Protocol UDP | TCP; default: UDP Transfer protocol used for the OpenVPN connection.
  • Transmission Control Protocol (TCP) - most commonly used protocol in the Internet Protocol (IP) suite. It ensures the recipient will receive packets in the order they were sent by numbering, analysing response messages, checking for errors and resending them if an issue occurs. It should be used when reliability is crucial (for example, in file transfer).
  • User Datagram Protocol (UDP) - packets are sent to the recipient without error-checking or back-and-forth quality control, meaning that when packets are lost, they are gone forever. This makes it less reliable but faster than TCP; therefore, it should be used when transfer speed is crucial (for example, in video streaming, live calls).
Port integer [0..65535]; default: 1194 TCP/UDP port number used for the connection. Make sure it matches the port number specified on the server side.
NOTE: traffic on the selected port will be automatically allowed in the router's firewall rules.
LZO yes | no; default: no Turns LZO data compression on or off.
Encryption DES-CBC 64 | RC2-CBC 128 | DES-EDE-CBC 128 | DES-EDE3-CBC 192 | DESX-CBC 192 | BF-CBC 128 | RC2-40-CBC 40 | CAST5-CBC 128 | RC2-40CBC 40 | CAST5-CBC 128 | RC2-64-CBC 64| AES-128-CBC 128 | AES-192-CBC 192 | AES-256-CBC 256 | none; default: BF-CBC 128 Algorithm used for packet encryption.
Authentication TLS | Static Key | Password | TLS/Password; default: TLS Authentication mode, used to secure data sessions.
  • Static key is a secret key used for server–client authentication.
  • TLS authentication mode uses X.509 type certificates:
    • Certificate Authority (CA)
    • Client certificate
    • Client key
    All mentioned certificates can be generated using OpenVPN or Open SSL utilities on any type of host machine. One of the most popular utilities used for this purpose is called Easy-RSA.
  • Password is a simple username/password based authentication where the owner of the OpenVPN server provides the login data.
  • TLS/Password uses both TLS and username/password authentication.
TLS: TLS cipher All | DHE+RSA | Custom; default: All Packet encryption algorithm cipher.
TLS: Allowed TLS ciphers All | DHE+RSA | Custom; default: All A list of TLS ciphers accepted for this connection.
Remote host/IP address ip; default: none IP address or hostname of an OpenVPN server.
Resolve retry integer | infinite; default: infinite In case server hostname resolve fails, this field indicates the amount of time (in seconds) to retry the resolve. Specify infinite to retry indefinitely.
Keep alive two integers separated by a space; default: none Defines two time intervals: the first is used to periodically send ICMP requests to the OpenVPN server, the second one defines a time window, which is used to restart the OpenVPN service if no ICMP response is received during the specified time slice. When this value is specfiied on the OpenVPN server, it overrides the 'keep alive' values set on client instances.
Example: 10 120
Static key: Local tunnel endpoint IP ip; default: none IP address of the local OpenVPN network interface.
Static key: Remote tunnel endpoint IP ip; default: none IP address of the remote OpenVPN network (server) interface.
Remote network IP address ip; default: none LAN IP address of the remote network (server).
Remote network IP netmask netmask; default: none LAN IP subnet mask of the remote network (server).
Password: User name string; default: none Username used for authentication to the OpenVPN server.
Password: Password string; default: none Password used for authentication to the OpenVPN server.
Extra options string; default: none Extra OpenVPN options to be used by the OpenVPN instance.
TLS/Password: HMAC authentication algorithm none | SHA1 | SHA256 | SHA384 | SHA512; default: SHA1 HMAC authentication algorithm type.
TLS/Password: Additional HMAC authentication yes | no; default: no An additional layer of HMAC authentication on top of the TLS control channel to protect against DoS attacks.
TLS/Password: HMAC authentication key .key file; default: none Uploads an HMAC authentication key file.
TLS/Password: HMAC key direction 0 | 1 | none; default: 1 The value of the key direction parameter should be complementary on either side (client and server) of the connection. If one side uses 0, the other side should use 1, or both sides should omit the parameter altogether.
TLS/Password: Certificate authority .ca file; default: none Certificate authority is an entity that issues digital certificates. A digital certificate certifies the ownership of a public key by the named subject of the certificate.
TLS: Client certificate .crt file; default: none Client certificate is a type of digital certificate that is used by client systems to make authenticated requests to a remote server. Client certificates play a key role in many mutual authentication designs, providing strong assurances of a requester's identity.
TLS: Client key .key file; default: none Authenticates the client to the server and establishes precisely who they are.
TLS: Private key decryption password (optional) string; default: none A password used to decrypt the server's private key. Use only if server's .key file is encrypted with a password.
Static key: Static pre-shared key .key file; default: none Uploads a secret key file used for server–client authentication.

Additional notes:

  • Some configuration fields become available only when certain other parameters are selected. The names of the parameters are followed by a prefix that specifies the authentication type under which they become visible. Different color codes are used for different prefixes:
    • Red for Authentication: TLS
    • Purple for Authentication: Static key
    • Blue for Authentication: Password
  • After changing any of the parameters, don't forget to click the Save button located at the bottom-right side of the page.

OpenVPN server

An OpenVPN server is an entity that waits for incoming connections from OpenVPN clients. To create a new server instance, go to the Services → VPN → OpenVPN section, select Role: Server, enter a custom name and click the 'Add New' button. An OpenVPN server instance with the given name will appear in the "OpenVPN Configuration" list. Only one OpenVPN server instance is allowed to be added.

A server needs to have a public IP address in order to be available from the public network (the Internet).

To begin configuration, click the 'Edit' button next to the server instance. Refer to the figure and table below for information on the OpenVPN server's configuration fields:

Field Value Description
Enable yes | no; default: no Turns the OpenVPN instance on or off.
TUN/TAP TUN (tunnel) | TAP (bridged); default: TUN (tunnel) Virtual network device type.
  • TUN - a virtual point-to-point IP link which operates at the network layer (OSI layer 3), used when routing is required.
  • TAP - a virtual Ethernet adapter (switch), operates at the data link layer (OSI layer 2), used when bridging is required.
Protocol UDP | TCP; default: UDP Transfer protocol used for the connection.
  • Transmission Control Protocol (TCP) - most commonly used protocol in the Internet Protocol (IP) suite. It ensures the recipient will receive packets in the order they were sent by numbering, analysing response messages, checking for errors and resending them if an issue occurs. It should be used when reliability is crucial (for example, file transfer).
  • User Datagram Protocol (UDP) - packets are sent to the recipient without error-checking or back-and-forth quality control, meaning that when packets are lost, they are gone forever. This makes it less reliable but faster than TCP; therefore, it should be used when transfer speed is crucial (for example, video streaming, live calls).
Port integer [0..65535]; default: 1194 TCP/UDP port number used for the connection. Make sure it matches the port number specified on the server side.
NOTE: traffic on the selected port will be automatically allowed in the router's firewall rules.
LZO yes | no; default: no Turns LZO data compression on or off.
Encryption DES-CBC 64 | RC2-CBC 128 | DES-EDE-CBC 128 | DES-EDE3-CBC 192 | DESX-CBC 192 | BF-CBC 128 | RC2-40-CBC 40 | CAST5-CBC 128 | RC2-40CBC 40 | CAST5-CBC 128 | RC2-64-CBC 64| AES-128-CBC 128 | AES-192-CBC 192 | AES-256-CBC 256 | none; default: BF-CBC 128 Algorithm used for packet encryption.
Authentication TLS | Static Key | TLS/Password; default: TLS Authentication mode, used to secure data sessions.
  • Static key is a secret key used for server–client authentication.
  • TLS authentication mode uses X.509 type certificates:
    • Certificate Authority (CA)
    • Client certificate
    • Client key
    All mentioned certificates can be generated using OpenVPN or Open SSL utilities on any type of host machine. One of the most popular utilities used for this purpose is called Easy-RSA.
  • TLS/Password uses both TLS and username/password authentication.
Static key: Local tunnel endpoint IP ip; default: none IP address of the local OpenVPN network interface.
Static key: Remote tunnel endpoint IP ip; default: none IP address of the remote OpenVPN network (client) interface.
Static key: Remote network IP address ip; default: none LAN IP address of the remote network (client).
Static key: Remote network IP netmask netmask; default: none LAN IP subnet mask of the remote network (client).
TLS/TLS/Password: TLS cipher All | DHE+RSA | Custom; default: All Packet encryption algorithm cipher.
TLS/Password: Allowed TLS ciphers All | DHE+RSA | Custom; default: All A list of TLS ciphers accepted for this connection.
TLS/TLS/Password: Client to client yes | no; default: no Allows OpenVPN clients to communicate with each other on the VPN network.
TLS/TLS/Password: Keep alive two integers separated by a space; default: none Defines two time intervals: the first is used to periodically send ICMP requests to the OpenVPN server, the second one defines a time window, which is used to restart the OpenVPN service if no ICMP response is received during the specified time slice. When this value is specifiied on the OpenVPN server, it overrides the 'keep alive' values set on client instances.
Example: 10 120
TLS/TLS/Password: Virtual network IP address ip; default: none IP address of the OpenVPN network.
TLS/TLS/Password: Virtual network netmask netmask; default: none Subnet mask of the OpenVPN network.
TLS/TLS/Password: Push option OpenVPN options; default: none Push options are a way to "push" routes and other additional OpenVPN options to connecting clients.
TLS/TLS/Password: Allow duplicate certificates yes | no; default: no When enabled allows multiple clients to connect using the same certificates.
TLS/Password: User name string; default: none Username used for authentication to this OpenVPN server.
TLS/Password: Password string; default: none Password used for authentication to this OpenVPN server.
Static key: Static pre-shared key .key file; default: none Uploads a secret key file used for server–client authentication.
TLS/TLS/Password: Certificate authority .ca file; default: none Certificate authority is an entity that issues digital certificates. A digital certificate certifies the ownership of a public key by the named subject of the certificate.
TLS/TLS/Password: Server certificate .crt file; default: none A type of digital certificate that is used to identify the OpenVPN server.
TLS/TLS/Password: Server key .key file; default: none Authenticates clients to the server.
TLS/TLS/Password: Diffie Hellman parameters .pem file; default: none DH parameters define how OpenSSL performs the Diffie-Hellman (DH) key-exchange.
TLS/TLS/Password: CRL file (optional) .pem file | .crl file; default: none A certificate revocation list (CRL) file is a list of certificates that have been revoked by the certificate authority (CA). It indicates which certificates are no longer acccepted by the CA and therefore cannot be authenticated to the server.

Additional notes:

  • Some configuration fields become available only when certain other parameters are selected. The names of the parameters are followed by a prefix that specifies the authentication type under which they become visible. Different color codes are used for different prefixes:
    • Red for Authentication: TLS
    • Purple for Authentication: Static key
    • Blue for Authentication: TLS/Password
  • After changing any of the parameters, don't forget to click the Save button located at the bottom-right side of the page.

TLS Clients

TLS Clients is a way to differentiate clients by their Common Names (CN), which are found in the client certificate file. It can be used to assign specific VPN addresses to corresponding clients and bind them to their LAN addresses, making the server aware of which client has which LAN IP address.

The TLS Clients section can be found in the OpenVPN Server configuration window, provided that the OpenVPN server uses TLS or TLS/Password authentication methods. To create a new TLS client, type in the new client‘s name in the text field found bellow the TLS Clients tab and click the 'Add' button. Refer to the figure and table below for information on the TLS Clients' configuration fields:

Field Value Description
VPN instance name string; default: none Indicates which OpenVPN instance the TLS Client will be associated with. When left empty, this field is filled automatically.
Endpoint name string; default: none A custom name for the client.
Common name (CN) string; default: none Client’s Common Name (CN) found in the client certificate file.
Virtual local endpoint ip; default: none Client’s local address in the virtual network.
Virtual remote endpoint ip; default: none Client’s remote address in the virtual network.
Private network ip; default: none Client’s private network (LAN) IP address.
Private netmask ip; default: none Client’s private network (LAN) IP netmask.

IPsec

To create a new IPsec instance, go to the Services → VPN → IPsec section, enter a custom name and click "Add". An IPsec instance with the given name will appear in the "IPsec Configuration" list.

To begin configuration, click the 'Edit' button located next to the instance.

IPsec configuration

The IPsec configuration section is used to configure the main parameters of an IPsec connection. Refer to the figure and table below for information on the configuration fields located in the general settings section.

Field Value Description
Enable yes | no; default: no Turns the IPsec instance on or off.
Mode Main | Aggressive; default: Main Internet Security and Key Management Protocol (ISAKMP) phase 1 exchange mode.
  • Main - performs three two-way exchanges between the initiator and the receiver (a total of 9 messages).
  • Aggressive - performs fewer exchanges than main mode (a total of 6 messages) by storing most data into the first exchange. In aggressive mode, the information is exchanged before there is a secure channel, making it less secure but faster than main mode.
My identifier type FQDN | User FQDN | Address; default: FQDN Defines the type of identity used in user (IPsec instance) authentication.
  • FQDN - identity defined by fully qualified domain name. It is the complete domain name for a host (for example, something.somedomain.com). Only supported with IKEv2.
  • User FQDN - identity defined by fully qualified username string (for example, [email protected]). Only supported with IKEv2.
  • Address - identity by IP address.
My identifier ip | string; default: none Defines how the user (IPsec instance) will be identified during authentication.
Dead Peer Detection yes | no; default: no A function used during Internet Key Exchange (IKE) to detect a "dead" peer. It used to reduce traffic by minimizing the number of messages when the opposite peer in unavailable and as failover mechanism.
Pre shared key string; default: none A shared password used for authentication between IPsec peers before a secure channel is established.
Remote VPN endpoint host | ip; default: none IP address or hostname of the remote IPsec instance.
IP address/Subnet mask ip/netmask; default: none Remote network IP address and subnet mask used to determine which part of the network can be accessed in the VPN network. Netmask range [0..32]. This value must differ from the device’s LAN IP.
Enable keepalive yes | no; default: no When enabled, the instance sends ICMP packets to the specified host at the specified frequency. If no response is received, the router will attempt to restart the connection.
Host host | ip; default: none Hostname or IP address to which keepalive ICMP packets will be sent to.
Ping period (sec) integer [0..9999999]; default: none The frequency at which keepalive ICMP packets will be sent to the specified host or IP address.

Additional notes:

  • Some configuration fields become available only when certain other parameters are selected. The names of the parameters are followed by a prefix that specifies the authentication type under which they become visible. Different color codes are used for different prefixes:
    • Red for Type: Tunnel
    • Purple for Type: Transport
    • Blue for Dead Peer Detection: Enabled
  • After changing any of the parameters, don't forget to click the Save button located at the bottom-right side of the page.

Phase settings

IKE (Internet Key Exchange) is a protocol used to set up security associations (SAs) for the IPsec connection. This process is required before the IPsec tunnel can be established. It is done in two phases:

Phase Mode
Phase 1
  • Establishes a secure channel between peers
  • Authenticates peers
  • Negotiates SA policy
  • Shares secret keys
  • Establishes secure tunnel for phase 2
 Main mode (figure 1)
  • 6 packets exchanged
  • Identity protected during exchange
 Aggressive mode (figure 2)
  • 3 packets exchanged
  • Identity information exchanged before a secure channel is established
Phase 2
  • Sets up matching IPsec SAs
  • Periodically renegotiates IPsec SAs
 Quick mode
  • 3 packets exchanged
  • IPsec SA parameters (ESP/AH, SHA/MD5) established
  • SA lifetime set


Figure 1 Figure 2

Field Value Description
Encryption algorithm DES | 3DES | AES128 | AES192 | AES256; default: 3DES Algorithm used for data encryption.
Authentication/Hash algorithm MD5 | SHA1 | SHA256 | SHA384 | SHA512; default: SHA1 Algorithm used for exchanging authentication and hash information.
DH group/PFS group MODP768 | MODP1024 | MODP1536 | MODP2048 | MODP3072 | MODP4096; default: MODP1536 Diffie-Hellman (DH) group used in the key exchange process. Higher group numbers provide more security, but take longer and use more resources to compute the key.
Lifetime integer; default: 8 hours Defines a time period after which the phase will re-initiate its exchange of information.

L2TP

In computer networking, Layer 2 Tunneling Protocol (L2TP) is a tunneling protocol used to support virtual private networks (VPNs). It is more secure than PPTP but, because it encapsulates the transferred data twice, but it is slower and uses more CPU power.

L2TP client

An L2TP client is an entity that initiates a connection to an L2TP server. To create a new client instance, go to the Services → VPN → L2TP section, select Role: Client, enter a custom name and click the 'Add New' button. An L2TP client instance with the given name will appear in the "L2TP Configuration" list.

To begin configuration, click the 'Edit button located next to the client instance. Refer to the figure and table below for information on the L2TP client's configuration fields:

Field Value Description
Enable yes | no; default: no Turns the L2TP instance on or off.
Server ip | host; default: none IP address or hostname of an L2TP server.
Username string; default: none Username used for authentication to the L2TP server.
Password string; default: none Password used for authentication to the L2TP server.
Default route yes | no; default: no When turned on, this connection will become the router's default route. This means that all traffic directed to the Internet will go through the L2TP server and the server's IP address will be seen as this device's source IP to other hosts on the Internet.
NOTE: this can only be used when Backup WAN is turned off.

L2TP server

An L2TP server is an entity that waits for incoming connections from L2TP clients. To create a new server instance, go to the Services → VPN → L2TP section, select Role: Server, enter a custom name and click the 'Add New' button. An L2TP server instance with the given name will appear in the "L2TP Configuration" list. Only one L2TP server instance is allowed to be added.

A server needs to have a public IP address in order to be available from the public network (the Internet).

To begin configuration, click the 'Edit' button located next to the server instance. Refer to the figure and table below for information on the L2TP server's configuration fields:

Field Value Description
Enable yes | no; default: no Turns the L2TP instance on or off.
Local IP ip; default: 192.168.0.1 IP address of this L2TP network interface.
Remote IP range begin ip; default: 192.168.0.20 L2TP IP address leases will begin from the address specified in this field.
Remote IP range end ip; default: 192.168.0.30 L2TP IP address leases will end with the address specified in this field.
User name string; default: user Username used for authentication to this L2TP server.
Password string; default: pass Password used for authentication to this L2TP server.
L2TP Client's IP ip; default: none Assigns an IP address to the client that uses the adjacent authentication info. This field is optional and if left empty the client will simply receive an IP address from the IP pool defined above.

See also

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=RUT850_VPN&oldid=55879"