OpenVPN configuration examples (Legacy Firmware): Difference between revisions
Justas.Cip (talk | contribs) m (Justas.Cip moved page OpenVPN configuration examples (Legacy) to OpenVPN configuration examples (Legacy Firmware) without leaving a redirect) |
|||
| (12 intermediate revisions by 7 users not shown) | |||
| Line 9: | Line 9: | ||
Before configuring anything you should first know what type of OpenVPN connection suits your needs the best. The key things to be considered here are the type of connection ('''TUN''' ('''tunnel''') or '''TAP''' ('''bridged''')), the data transfer protocol ('''User Datagram Protocol''' ('''UDP''') or '''Transmission Control Protocol''' ('''TCP''')) and authentication type ('''TLS''' or '''Static key'''). Here is a short overview of the differences: | Before configuring anything you should first know what type of OpenVPN connection suits your needs the best. The key things to be considered here are the type of connection ('''TUN''' ('''tunnel''') or '''TAP''' ('''bridged''')), the data transfer protocol ('''User Datagram Protocol''' ('''UDP''') or '''Transmission Control Protocol''' ('''TCP''')) and authentication type ('''TLS''' or '''Static key'''). Here is a short overview of the differences: | ||
* Type | *Type | ||
** TUN (tunnel) - simulates a network layer device and it operates with layer 3 packets like IP packets. TUN is used for routing and connecting '''multiple''' clients to a single server. | **TUN (tunnel) - simulates a network layer device and it operates with layer 3 packets like IP packets. TUN is used for routing and connecting '''multiple''' clients to a single server. | ||
** TAP (bridged) - simulates a link layer device and it operates with layer 2 packets like Ethernet frames. TAP is used for creating a network bridge between '''two''' Ethernet segments in different locations. | **TAP (bridged) - simulates a link layer device and it operates with layer 2 packets like Ethernet frames. TAP is used for creating a network bridge between '''two''' Ethernet segments in different locations. | ||
* Protocol | *Protocol | ||
** UDP - is used by apps to deliver a faster stream of information by doing away with error-checking. | **UDP - is used by apps to deliver a faster stream of information by doing away with error-checking. | ||
** TCP - a suite of protocols used by devices to communicate over the Internet and most local networks. It provides apps a way to deliver (and receive) an ordered and error-checked stream of information packets over the network. | **TCP - a suite of protocols used by devices to communicate over the Internet and most local networks. It provides apps a way to deliver (and receive) an ordered and error-checked stream of information packets over the network. | ||
* Authentication | *Authentication | ||
** TLS - uses SSL/TLS + certificates for authentication and key exchange. | **TLS - uses SSL/TLS + certificates for authentication and key exchange. | ||
** Static key - uses a pre-shared Static key. Can only be used between two peers. | **Static key - uses a pre-shared Static key. Can only be used between two peers. | ||
Overviews on most of these types and variations are provided in this article. Concerning TCP vs UDP, we will be using UDP for all examples. Choosing between TCP and UDP doesn't affect the rest of the configuration, so you can still follow the given examples no matter which protocol you are using. | Overviews on most of these types and variations are provided in this article. Concerning TCP vs UDP, we will be using UDP for all examples. Choosing between TCP and UDP doesn't affect the rest of the configuration, so you can still follow the given examples no matter which protocol you are using. Simply choose the one that suits your purposes. | ||
==TLS Authentication== | ==TLS Authentication== | ||
| Line 31: | Line 31: | ||
A connection that uses TLS requires multiple certificates and keys for authentication: | A connection that uses TLS requires multiple certificates and keys for authentication: | ||
* OpenVPN server | *OpenVPN server | ||
** The root certificate file (Certificate Authority) | **The root certificate file (Certificate Authority) | ||
** Server certificate | **Server certificate | ||
** Server key | **Server key | ||
** Diffie Hellman Parameters | **Diffie Hellman Parameters | ||
* OpenVPN client | *OpenVPN client | ||
** The root certificate file (Certificate Authority) | **The root certificate file (Certificate Authority) | ||
** Client certificate | **Client certificate | ||
** Client key | **Client key | ||
Before you continue you'll to obtain the necessary certificates and keys. When you use a third party OpenVPN service, they should provide you with their certificates and even configuration files. | Before you continue you'll to obtain the necessary certificates and keys. When you use a third party OpenVPN service, they should provide you with their certificates and even configuration files. | ||
If you're creating your own server, you'll have to generate these files yourself. To get detailed instruction on how to generate TLS certificates and keys check out our | If you're creating your own server, you'll have to generate these files yourself. To get detailed instruction on how to generate TLS certificates and keys check out our article on the topic for '''[[How to generate TLS certificates (Windows)?|Windows TLS certificate generation]]'''. | ||
===Configuration=== | ===Configuration=== | ||
| Line 79: | Line 79: | ||
If you are using a Linux-based OS, extracting files from the router is simple. Just go to the directory on your PC where you want to relocate the files, right click anywhere and choose the '''Open in Terminal''' option. In the Terminal command line use the '''Secure Copy''' ('''scp''') command to copy the files from the router. The full command should look something like this: | If you are using a Linux-based OS, extracting files from the router is simple. Just go to the directory on your PC where you want to relocate the files, right click anywhere and choose the '''Open in Terminal''' option. In the Terminal command line use the '''Secure Copy''' ('''scp''') command to copy the files from the router. The full command should look something like this: | ||
$ scp [email protected]:/etc/ | $ scp [email protected]:/etc/easy-rsa/keys/static.key ./ | ||
The '''[email protected]:/etc/easy-rsa/keys/static.key''' specifies the path to where the Static key is located (replace the IP address with your router's LAN IP); the '''./''' denotes that you want to copy the contents to the directory you are in at the moment. | The '''[email protected]:/etc/easy-rsa/keys/static.key''' specifies the path to where the Static key is located (replace the IP address with your router's LAN IP); the '''./''' denotes that you want to copy the contents to the directory you are in at the moment. | ||
If you are using Windows, you can copy files from the router using '''WinSCP''', an Open source freeware SFTP, SCP and FTP client for Windows OS. Use the same login information with WinSCP as with CLI or SSH. Once you've connected to the router with WinSCP, copying the files should be simple enough: just relocate to directory where you generated the key, select the Static key file and drag it to directory on your PC where you would like to store it. | If you are using Windows, you can copy files from the router using '''WinSCP''', an Open source freeware SFTP, SCP and FTP client for Windows OS. Use the same login information with WinSCP as with CLI or SSH. Once you've connected to the router with WinSCP, copying the files should be simple enough: just relocate to directory where you generated the key, select the Static key file and drag it to directory on your PC where you would like to store it. | ||
'''Please note''': You must select '''SCP''' as File Protocol in WinSCP Session settings. | |||
====On a Linux PC==== | ====On a Linux PC==== | ||
| Line 110: | Line 112: | ||
===Configuration=== | ===Configuration=== | ||
---- | ---- | ||
TAP is used for creating a network bridge between | TAP is used for creating a network bridge between Ethernet segments in different locations. For this example we will be creating a TAP (bridged) type connection that uses the UDP protocol for data transfer and TLS for Authentication. We will be using two RUT routers: '''RUT1''' ('''Server'''; LAN IP: '''192.168.1.1'''; WAN (Public static) IP: '''193.186.223.42''') and '''RUT2''' ('''Client'''; LAN IP: '''192.168.1.2'''); the two routers will be connected via OpenVPN. | ||
[[File:Openvpn tap example.png]] | [[File:Openvpn tap example.png]] | ||
To sum up, just make sure the Server and the Clients use the same parameters (same authentication, same port, same protocol, etc.). | To sum up, just make sure the Server and the Clients use the same parameters (same authentication, same port, same protocol, etc.). Since the OpenVPN interface that comes up is bridged with the LAN interface, make sure the routers are in the '''same subnet''' (192.168.1.0 in this case). While making sure of that, don't forget that the routers can't have the same IP address, just the same subnet (for example, if both routers have the LAN IP 192.168.1.1, the connection won't work; if one has, for example, 192.168.1.1 and the other 192.168.1.100, then the connection will work). | ||
For this example we used TLS Authentication. If you want to use a different Authentication method, refer to the relevant section of this article. The authentication configuration will not be different because of the chosen OpenVPN type (TUN or TAP). | For this example we used TLS Authentication. If you want to use a different Authentication method, refer to the relevant section of this article. The authentication configuration will not be different because of the chosen OpenVPN type (TUN or TAP). | ||
| Line 122: | Line 124: | ||
==Testing an OpenVPN connection== | ==Testing an OpenVPN connection== | ||
The most important thing after configuration is making sure that the newly established connection works. You can check the status of an OpenVPN connection in the ''' | The most important thing after configuration is making sure that the newly established connection works. You can check the status of an OpenVPN connection in the '''Status → Network → OpenVPN''' page: | ||
[[File:Openvpn connection test 2.png]] | [[File:Openvpn connection test 2.png]] | ||
| Line 142: | Line 144: | ||
====Server from Client==== | ====Server from Client==== | ||
---- | ---- | ||
To reach another OpenVPN instance's LAN network, you have to have a '''route''' to that network with the '''Virtual remote endpoint''' as the ''' gateway. You can add '''Static routes''' via command line, but these routes are removed automatically when router reboots or when connection goes down even if only for a moment. To solve this, you add permanent static routes via the router's WebUI in the '''[[Routing#Static_Leases|Network → Routing → Static Routes]]''' page. But this method is also not foolproof since it means that if an address ever changes, you would have to also modify the static route on all related devices. | To reach another OpenVPN instance's LAN network, you have to have a '''route''' to that network with the '''Virtual remote endpoint''' as the ''' gateway. You can add '''Static routes''' via command line, but these routes are removed automatically when router reboots or when connection goes down even if only for a moment. To solve this, you add permanent static routes via the router's WebUI in the '''[[Routing#Static_Leases|Network → Routing → Static Routes]]''' page. But this method is also not foolproof since it means that if an address ever changes, you would have to also modify the static route on all related devices. ''' | ||
---- | ---- | ||
Another method of reaching the OpenVPN Server's private network from the Client is specifying the network in the OpenVPN Client's configuration. To do so, open the Client's configuration window and fill in these two fields: | Another method of reaching the OpenVPN Server's private network from the Client is specifying the network in the OpenVPN Client's configuration. To do so, open the Client's configuration window and fill in these two fields: | ||
| Line 178: | Line 180: | ||
For Client to Client communication to work you have to do three things: | For Client to Client communication to work you have to do three things: | ||
* Create unique TLS Clients instances for each of the Clients | *Create unique TLS Clients instances for each of the Clients | ||
* Push the necessary routes via the Push option field | *Push the necessary routes via the Push option field | ||
* Enable Client to Client functionality in the Server's configuration | *Enable Client to Client functionality in the Server's configuration | ||
=====TLS Clients===== | ====='''TLS Clients'''===== | ||
---- | ---- | ||
First, configure TLS Clients. You can find the description on how to do that in the section before this one ('''[[OpenVPN_configuration_examples#Clients_from_Server|here]]'''). This is necessary in the case of multiple Clients because the Server will not only be pushing the routes of other Clients but also the routes to the Clients' own networks to their routing tables. This would cause the Clients' routers to be unreachable until the OpenVPN connection is terminated. | First, configure TLS Clients. You can find the description on how to do that in the section before this one ('''[[OpenVPN_configuration_examples#Clients_from_Server|here]]'''). This is necessary in the case of multiple Clients because the Server will not only be pushing the routes of other Clients but also the routes to the Clients' own networks to their routing tables. This would cause the Clients' routers to be unreachable until the OpenVPN connection is terminated. | ||
| Line 192: | Line 194: | ||
Next, configure the necessary push options. You will have to include all Clients' networks if you want them all to communicate with each other. For the sake of argument, lets say you have three Clients that belong to three distinct LAN networks: | Next, configure the necessary push options. You will have to include all Clients' networks if you want them all to communicate with each other. For the sake of argument, lets say you have three Clients that belong to three distinct LAN networks: | ||
* 192.168.5.0 | *192.168.5.0 | ||
* 192.168.6.0 | *192.168.6.0 | ||
* 192.168.7.0 | *192.168.7.0 | ||
To give them all the necessary routes, you would have to include these three push options: | To give them all the necessary routes, you would have to include these three push options: | ||
| Line 229: | Line 231: | ||
====Firewall Zone Forwarding==== | ====Firewall Zone Forwarding==== | ||
---- | ---- | ||
Next, go to the '''Network → Firewall → Zone Forwarding section. Click the '''Edit''' button located next to the '''vpn''' rule and in the subsequent window add a check mark next to '''wan''' as such: | Next, go to the '''Network → Firewall → Zone Forwarding section. Click the '''Edit''' button located next to the '''vpn''' rule and in the subsequent window add a check mark next to '''wan''' as such:''' | ||
[[File:Zone forwarding.png|1100px]] | [[File:Zone forwarding.png|1100px]] | ||
| Line 256: | Line 258: | ||
Yet another method would be using the SMS Utilities '''uci''' rule. You can find information on the rule itself '''[[SMS_Utilities#UCI_API_rule|SMS Utilities manual article]]''' and more detailed information the UCI System in general '''[[UCI_command_usage|here]]'''. | Yet another method would be using the SMS Utilities '''uci''' rule. You can find information on the rule itself '''[[SMS_Utilities#UCI_API_rule|SMS Utilities manual article]]''' and more detailed information the UCI System in general '''[[UCI_command_usage|here]]'''. | ||
In addition we will provide the basic configurations for OpenVPN Server and Client discussed in this article in "UCI form". This includes OpenVPN TLS, Static key, TUN, TAP configurations for both Server and Client. You can download the text file with these configurations if you follow this link: '''[[Media:ovpn]]''' | <!--In addition we will provide the basic configurations for OpenVPN Server and Client discussed in this article in "UCI form". This includes OpenVPN TLS, Static key, TUN, TAP configurations for both Server and Client. You can download the text file with these configurations if you follow this link: '''[[Media:ovpn]]''' | ||
'''Note''': remember to change the section and option names and their values according to your own configuration. | '''Note''': remember to change the section and option names and their values according to your own configuration. | ||
'''Note 2''': this method doesn't provide the possibility to send certificates and, therefore, should be used only to edit present OpenVPN instances and not create new ones. | '''Note 2''': this method doesn't provide the possibility to send certificates and, therefore, should be used only to edit present OpenVPN instances and not create new ones. --> | ||
==See also== | ==See also== | ||
* [[How to generate TLS certificates (Windows | *[[How to generate TLS certificates (Windows)?]] | ||
*[[OpenVPN client on Windows]] | |||
* [[OpenVPN client on Windows]] | *[[OpenVPN client on Linux]] | ||
* [[OpenVPN client on Linux]] | *[[OpenVPN server on Windows]] | ||
* [[OpenVPN server on Windows]] | *[[OpenVPN traffic split]] | ||
* [[OpenVPN traffic split]] | *Other types of VPNs suported by RUTxxx devices: | ||
* Other types of VPNs suported by RUTxxx devices: | **[[IPsec configuration examples]] | ||
** [[IPsec configuration examples]] | **[[GRE Tunnel configuration examples]] | ||
** [[GRE Tunnel configuration examples]] | **[[PPTP configuration examples]] | ||
** [[PPTP configuration examples]] | **[[L2TP configuration examples]] | ||
** [[L2TP configuration examples]] | |||
==External links== | ==External links== | ||
Latest revision as of 07:47, 25 June 2024
Introduction
OpenVPN is an open-source software application that implements virtual private network (VPN) techniques for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities.
This article contains various OpenVPN configuration examples that require more in depth explanations in order to achieve a successful configuration. All of the examples given concern two or more RUT routers. For more basic explanations on the OpenVPN WebUI section, visit our VPN manual page.
OpenVPN configuration type
Before configuring anything you should first know what type of OpenVPN connection suits your needs the best. The key things to be considered here are the type of connection (TUN (tunnel) or TAP (bridged)), the data transfer protocol (User Datagram Protocol (UDP) or Transmission Control Protocol (TCP)) and authentication type (TLS or Static key). Here is a short overview of the differences:
- Type
- TUN (tunnel) - simulates a network layer device and it operates with layer 3 packets like IP packets. TUN is used for routing and connecting multiple clients to a single server.
- TAP (bridged) - simulates a link layer device and it operates with layer 2 packets like Ethernet frames. TAP is used for creating a network bridge between two Ethernet segments in different locations.
- Protocol
- UDP - is used by apps to deliver a faster stream of information by doing away with error-checking.
- TCP - a suite of protocols used by devices to communicate over the Internet and most local networks. It provides apps a way to deliver (and receive) an ordered and error-checked stream of information packets over the network.
- Authentication
- TLS - uses SSL/TLS + certificates for authentication and key exchange.
- Static key - uses a pre-shared Static key. Can only be used between two peers.
Overviews on most of these types and variations are provided in this article. Concerning TCP vs UDP, we will be using UDP for all examples. Choosing between TCP and UDP doesn't affect the rest of the configuration, so you can still follow the given examples no matter which protocol you are using. Simply choose the one that suits your purposes.
TLS Authentication
This section provides a guide on how to configure a successful OpenVPN connection between an OpenVPN Client and Server, using the TLS Authentication method on RUTxxx routers.
Generating TLS certificates/keys
A connection that uses TLS requires multiple certificates and keys for authentication:
- OpenVPN server
- The root certificate file (Certificate Authority)
- Server certificate
- Server key
- Diffie Hellman Parameters
- OpenVPN client
- The root certificate file (Certificate Authority)
- Client certificate
- Client key
Before you continue you'll to obtain the necessary certificates and keys. When you use a third party OpenVPN service, they should provide you with their certificates and even configuration files.
If you're creating your own server, you'll have to generate these files yourself. To get detailed instruction on how to generate TLS certificates and keys check out our article on the topic for Windows TLS certificate generation.
Configuration
Now we can start configuring OpenVPN Server and Client instances. For this example we will be creating a TUN (Tunnel) type connection that uses the UDP protocol for data transfer and TLS for Authentication. We will be using two RUT routers: RUT1 (Server; LAN IP: 192.168.1.1; WAN (Public static) IP: 193.186.223.42) and RUT2 (Client; LAN IP: 192.168.2.1); that will be connected into virtual network (with the virtual address: 10.0.0.0):
To sum up, just make sure the Server and the Clients use the same parameters (same authentication, same port, same protocol, etc.). Another important aspect is the Virtual network IP address (10.0.0.0 in this case). The Server and the connected Clients will be given IP address that belong to this network. If you're creating an exceptionally large network, you might want to change the Virtual network netmask.
From the Client side, make sure to enter the correct Remote host/IP address (193.186.223.42 in this case). This is the Server's Public IP address, not the virtual IP address.
Static key Authentication
This section provides a guide on how to configure a successful OpenVPN connection between an OpenVPN Client and Server, using the Static key Authentication method on RUT routers.
Creating a Static key
A Static key connection uses a pre-shared for authentication between a Server and one Client. You can generate a Static key within the router itself or with PC that uses a Linux-based OS.
Within the router
In order to generate a Static key within the router connect to the device via the Command Line Interface (CLI) or SSH (the default username is root, the password is your router's admin password, admin01 by default). CLI can be found in the router's WebUI, under Services. To connect to the router via SSH, use Terminal app (type ssh [email protected]; replace 192.168.1.1 with your router's LAN IP address) if you're using a Linux-based OS. Or download PuTTY, a free SSH and telnet client, if you're using Windows.
When you have connected to the router, relocate to the directory (for example, cd /etc/easy-rsa/keys/) where you want to store your Static key and use this command:
# openvpn --genkey --secret static.key
The newly generated Static key will appear in the same directory where you issued the command above.
Extracting the key
If you are using a Linux-based OS, extracting files from the router is simple. Just go to the directory on your PC where you want to relocate the files, right click anywhere and choose the Open in Terminal option. In the Terminal command line use the Secure Copy (scp) command to copy the files from the router. The full command should look something like this:
$ scp [email protected]:/etc/easy-rsa/keys/static.key ./
The [email protected]:/etc/easy-rsa/keys/static.key specifies the path to where the Static key is located (replace the IP address with your router's LAN IP); the ./ denotes that you want to copy the contents to the directory you are in at the moment.
If you are using Windows, you can copy files from the router using WinSCP, an Open source freeware SFTP, SCP and FTP client for Windows OS. Use the same login information with WinSCP as with CLI or SSH. Once you've connected to the router with WinSCP, copying the files should be simple enough: just relocate to directory where you generated the key, select the Static key file and drag it to directory on your PC where you would like to store it.
Please note: You must select SCP as File Protocol in WinSCP Session settings.
On a Linux PC
To generate a Static key on a Linux PC, go to the directory where you want the key to appear, right click anywhere in that directory and chose the option Open in Terminal. In the Terminal window execute this command:
$ openvpn --genkey --secret static.key
The newly generated key should then appear in the directory you were in.
Configuration
When you have a Static key, you can start configuring OpenVPN Server and Client instances. For this example we will be creating a TUN (Tunnel) type connection that uses the UDP protocol for data transfer and Static key for Authentication. We will be using two RUT routers: RUT1 (Server; LAN IP: 192.168.1.1; WAN (Public static) IP: 193.186.223.42) and RUT2 (Client; LAN IP: 192.168.2.1); the two routers will be connected via OpenVPN; the Server's Virtual IP address will be 10.0.0.1; the Client's - 10.0.0.2:
To sum up, just make sure the Server and the Clients use the same parameters (same authentication, same port, same protocol, etc.). Other important aspects are the Local tunnel endpoint IP and the Remote tunnel endpoint IP. Take note these two particular parameter values are reversed for the individual Client and the Server configurations since these values represent opposite things depending on the instance's perspective.
From the Client side, make sure to enter the correct Remote host/IP address (193.186.223.42 in this case). This is the Server's Public IP address, not the virtual IP address.
TAP (bridged) OpenVPN
This section provides a guide on how to configure a successful OpenVPN TAP (bridged) connection between an OpenVPN Client and Server on RUT routers.
Configuration
TAP is used for creating a network bridge between Ethernet segments in different locations. For this example we will be creating a TAP (bridged) type connection that uses the UDP protocol for data transfer and TLS for Authentication. We will be using two RUT routers: RUT1 (Server; LAN IP: 192.168.1.1; WAN (Public static) IP: 193.186.223.42) and RUT2 (Client; LAN IP: 192.168.1.2); the two routers will be connected via OpenVPN.
To sum up, just make sure the Server and the Clients use the same parameters (same authentication, same port, same protocol, etc.). Since the OpenVPN interface that comes up is bridged with the LAN interface, make sure the routers are in the same subnet (192.168.1.0 in this case). While making sure of that, don't forget that the routers can't have the same IP address, just the same subnet (for example, if both routers have the LAN IP 192.168.1.1, the connection won't work; if one has, for example, 192.168.1.1 and the other 192.168.1.100, then the connection will work).
For this example we used TLS Authentication. If you want to use a different Authentication method, refer to the relevant section of this article. The authentication configuration will not be different because of the chosen OpenVPN type (TUN or TAP).
From the Client side, make sure to enter the correct Remote host/IP address (193.186.223.42 in this case). This is the Server's Public IP address, not the LAN IP address.
Testing an OpenVPN connection
The most important thing after configuration is making sure that the newly established connection works. You can check the status of an OpenVPN connection in the Status → Network → OpenVPN page:
Another method of testing pinging the other instance's virtual IP address. You can send ping packets via CLI, SSH or from the System → Administration → Diagnostics section of the router's WebUI:
Ping the Server's virtual IP address from the Client or vice versa. If the ping packets are transmitted successfully, congratulations, you OpenVPN connection is working.
Additional configuration
This section will provide examples of some additional OpenVPN related configurations like how to reach another OpenVPN instance's private LAN or how to use an OpenVPN instance as a Proxy.
Reaching a device's LAN network
You may want your OpenVPN Clients to be able to reach devices that are in the Server device's private network (LAN) or vice versa. This section will provide directions on how to do that.
Server from Client
To reach another OpenVPN instance's LAN network, you have to have a route to that network with the Virtual remote endpoint as the gateway. You can add Static routes via command line, but these routes are removed automatically when router reboots or when connection goes down even if only for a moment. To solve this, you add permanent static routes via the router's WebUI in the Network → Routing → Static Routes page. But this method is also not foolproof since it means that if an address ever changes, you would have to also modify the static route on all related devices.
Another method of reaching the OpenVPN Server's private network from the Client is specifying the network in the OpenVPN Client's configuration. To do so, open the Client's configuration window and fill in these two fields:
As you can see, the two fields in question are Remote network IP address and Remote network IP netmask. The values placed in these fields specify the Server's LAN address and having them filled will automatically add the necessary route into the routing table when the OpenVPN connection goes up. However, if your OpenVPN Server has multiple Clients, you would need to do this for all of them. If that is the case, use this next method.
Even another method is pushing the necessary routes via the OpenVPN Server. This method is the most foolproof because it will generate a route to the Server's private network for all connecting Clients. Therefore, in case of configuration changes you would only have to edit one field in the Server's configuration instead of having to edit all of the Clients' configurations.
To accomplish this, go to OpenVPN Server's configuration window and locate the Push option field. Let's say that the Server's LAN IP address is 192.168.1.1. In this case use the line route 192.168.1.0 255.255.255.0
Modify the information so that it reflects your own configuration. Do not specify the gateway, because the command will not work. The correct gateway will be assigned automatically.
Clients from Server
Reaching OpenVPN Clients' private networks from the Server is a bit trickier than the opposite, because in order to do so the Server has to be aware of the different specific addresses and Common Names of specific Clients.
To accomplish this, we can use the TLS Clients function. TLS Clients is a way to more specifically differentiate Clients by their Common Name (CN) found in the client certificate file. It can be used to assign specific VPN addresses to specific Clients and bind them to their LAN addresses so that other devices in the Client‘s LAN can be reached from the Server.
In other words, TLS Clients binds Common Names (found in Client certificates) to Clients' private networks. If the certificate hasn't been tampered with in any after generation, the Common name should be the same as the file name (without the file type extension). For example, a certificate called client1.crt will likely have the Common Name of client1. But just to be sure you can open the certificate and check:
Once you know the Common Names and LAN IP Addresses of your OpenVPN Clients, you can create TLS Clients instances for each of them:
In addition, with TLS Clients you can manually assign Virtual local and remote endpoint addresses for the Clients. But these fields are not mandatory and the addresses will be assigned automatically if they are left unchecked.
Client to Client
For Client to Client communication to work you have to do three things:
- Create unique TLS Clients instances for each of the Clients
- Push the necessary routes via the Push option field
- Enable Client to Client functionality in the Server's configuration
TLS Clients
First, configure TLS Clients. You can find the description on how to do that in the section before this one (here). This is necessary in the case of multiple Clients because the Server will not only be pushing the routes of other Clients but also the routes to the Clients' own networks to their routing tables. This would cause the Clients' routers to be unreachable until the OpenVPN connection is terminated.
TLS Clients solves this problem, because the configuration then "tells" the router not push certain routes to certain Clients. For example, if a router pushes the route 192.168.5.0 255.255.555.0 to Client whose LAN IP address is 192.168.5.1, that Client will not be able to reach its network. TLS Clients prevents this - if a Client, for example, has the LAN IP address of 192.168.5.1, he will not receive the route 192.168.5.0 255.255.555.0.
Push options
Next, configure the necessary push options. You will have to include all Clients' networks if you want them all to communicate with each other. For the sake of argument, lets say you have three Clients that belong to three distinct LAN networks:
- 192.168.5.0
- 192.168.6.0
- 192.168.7.0
To give them all the necessary routes, you would have to include these three push options:
route 192.168.5.0 255.255.255.0 route 192.168.6.0 255.255.255.0 route 192.168.7.0 255.255.255.0
The configuration should look something like this:
Enable Client to Client
The next and final step is to enable the Client to Client functionality. To do this, go to the OpenVPN server's configuration window and put a check mark at the Client to client option:
If you did so and followed all of the previous steps in section, your OpenVPN Clients should now be able to communicate with each other.
OpenVPN Proxy
OpenVPN Servers can be used as Proxies by OpenVPN Clients. This means that the client will be assigned the Public IP address of the OpenVPN server and will be seen as using that IP address when browsing the Internet, transferring data or doing any other online activities. This section provides direction on how to set up and OpenVPN Proxy on RUT routers.
Push options
The first thing that you have to do is configure Push options in the OpenVPN Server configuration that will change the Clients' default WAN route to OpenVPN and set the DNS server to the OpenVPN Server's LAN IP. To do so open the OpenVPN configuration window and add these options to the Push option field:
redirect-gateway def1 dhcp-option DNS 192.168.1.1
In this context 192.168.1.1 is the OpenVPN Server's LAN IP address. Replace this value with your own Server's LAN IP address.
Firewall Zone Forwarding
Next, go to the Network → Firewall → Zone Forwarding section. Click the Edit button located next to the vpn rule and in the subsequent window add a check mark next to wan as such:
This will redirect all WAN traffic through the OpenVPN tunnel.
To test this out, on device behind the OpenVPN Client go to http://www.whatsmyip.org/. If the website shows the Public IP address of the OpenVPN server, it means the Proxy works.
Remote configuration
If you don't have physical or local access in general to the router, there are a few options to configure OpenVPN instances remotely.
Remote HTTP
You can access your router's WebUI from remote locations by enabling the Remote HTTP option in the System → Administration → Access Control. This will only work, however, if you have a Public Static or Public Dynamic IP (not Public Shared; more on IP address types here.
You can also enable the SMS Utilities web rule. More on that here.
Note: before enabling any type of remote access it is highly recommended that you change the router's default admin password to minimize the risk of malicious remote connections. You can change your password in the System → Administration → General section.
Remote Configuration (SMS Utilities)
You can send OpenVPN configurations via Remote Configuration tool located in the Services → SMS Utilities section. This method allows you to configure OpenVPN (among other things) just as you would in the OpenVPN section and then send these configurations to another router via SMS. The configuration method is identical to regular OpenVPN configuration. Therefore, additional instructions will not be provided here, but you can find more information on the subject of Remote Configuration here.
UCI
Yet another method would be using the SMS Utilities uci rule. You can find information on the rule itself SMS Utilities manual article and more detailed information the UCI System in general here.
See also
- How to generate TLS certificates (Windows)?
- OpenVPN client on Windows
- OpenVPN client on Linux
- OpenVPN server on Windows
- OpenVPN traffic split
- Other types of VPNs suported by RUTxxx devices:
External links
https://github.com/OpenVPN/easy-rsa-old - Easy-RSA download
https://winscp.net/eng/download.php - WinSCP download
https://openvpn.net/index.php/open-source/documentation/howto.html - some additional information on OpenVPNs