| wan = 1 <!-- 1 has WAN type LEDs; 0 doesn't have WAN type LEDs -->
775 bytes (95 words) - 14:52, 21 June 2024
...sed in a Load Balancing example as a WAN interface that is second to wired WAN.-->
372 bytes (37 words) - 14:52, 21 June 2024
| wan = 0 <!-- 1 has WAN type LEDs; 0 doesn't have WAN type LEDs -->
774 bytes (95 words) - 16:11, 23 July 2024
...example is based in a local configuration, but also can be used via wired WAN or a remote installation with Public IP'')
...he URL field '''http://192.168.1.1/ubus''' (''use LAN IP for local access, WAN IP for remote access''),<br>
17 KB (2,480 words) - 11:31, 26 July 2024
* Both RUTxxx routers must be accessible from each other's WAN connection;
...two RUTxxx routers (RUT1 and RUT2) connected by an IPsec tunnel via their WAN interfaces.
12 KB (1,720 words) - 14:26, 6 August 2024
...er machine needs to be accessible via '''Public IP or Hostname''' over the WAN network.
...s no need for internet connectivity unless you are testing your setup over WAN network.
6 KB (911 words) - 12:40, 7 August 2024
...le to reach RUT2 LAN subnet. RUT1 has a LAN subnet of 192.168.3.0/24 and a WAN with private IP.
...dpoint for the RUT1 router. RUT2 has a LAN subnet of 192.168.14.0/24 and a WAN with Public IP, which should be reachable by RUT1.
11 KB (1,650 words) - 13:56, 7 August 2024
...in case of dynamic IP addresses the ISP provides the routers with private WAN IP addresses that are then "translated" into public IP addresses when conne
...to share a single public IP address. An ISP provides clients with private WAN IP addresses and then uses NAT to differentiate to which host specific data
7 KB (1,254 words) - 08:40, 9 November 2021
**[[Can WAN port be used as LAN?]]
**[[How can I access my router remotely through the WAN interface?]]
4 KB (539 words) - 13:39, 15 June 2020
....01.31''' - Added automatic firewall rule creating for reaching WebUI from WAN when DMZ is enabled. Available from RUT9XX_R_00.04.77 FW version.
...7.12.04''' - Improved IPsec transport mode functionality when using Backup WAN. Available from RUT9XX_R_00.03.955 FW version.
7 KB (986 words) - 08:46, 3 April 2018
...one Settings page where you will need to place a check mark next to the '''wan''' destination zone:
...gs window, '''Enable''' the PPTP instance, specify the server's '''Public (WAN) IP address''' and the '''client's authentication''' info as specified in t
6 KB (992 words) - 15:03, 8 July 2020
...one Settings page where you will need to place a check mark next to the '''wan''' destination zone:
...gs window, '''Enable''' the L2TP instance, specify the server's '''Public (WAN) IP address''' and the '''client's authentication''' info as specified in t
6 KB (1,066 words) - 08:37, 3 February 2020
<li> [[Can WAN port be used as LAN?]] </li>
<li> [[How can I access my router remotely through the WAN interface?]] </li>
4 KB (550 words) - 10:22, 28 May 2020
* [[RUT900 Use LAN port as WAN|Use LAN port as WAN]]
4 KB (590 words) - 10:49, 19 September 2022
...ble from spokes (HUB must have Public IP address, or has to be in the same WAN network as Spokes)
...Spokes that you need. Remember that other Spokes will have different LAN, WAN and GRE IP addresses.
5 KB (724 words) - 09:04, 8 January 2021
-
476 bytes (57 words) - 17:59, 6 November 2019
| [[File:WAN plug.jpg|thumb|left|300px|x300px]]
...ty of attaching another antenna. If necessary, it is possible to connect a WAN cable, it automatically connects to this network and disables the mobile in
3 KB (595 words) - 13:55, 27 November 2019
| wan = 1 <!-- Is WAN port present -->
433 bytes (41 words) - 11:49, 19 July 2021
| wan = 1 <!-- Is WAN port present -->
403 bytes (41 words) - 12:30, 12 January 2021
| wan = 1 <!-- Is WAN port present -->
403 bytes (41 words) - 12:30, 12 January 2021