[[File:Networking rutx11 example DNP3 service features v1.png|border|class=tlt-border]]
+
[[File:Networking rutx11 example DNP3 service features v1.png|boarder|class=tlt-boarder]]
Line 22:
Line 22:
TCP Master requests specific information from DNP3 outstation through the communication channel.
TCP Master requests specific information from DNP3 outstation through the communication channel.
−
−
To setup TCP MASTER click on the TCP Master Button and click ‘ADD’ to add a new master.
To setup TCP MASTER click on the TCP Master Button and click ‘ADD’ to add a new master.
Line 34:
Line 32:
[[File:Networking rutx11 example DNP3 tcp master configuration v1.png|border|class=tlt-border]]
[[File:Networking rutx11 example DNP3 tcp master configuration v1.png|border|class=tlt-border]]
−
−
−
'''Requests Configuration'''
−
−
To obtain data from DNP3 Outstation configure a DNP3 instance. The DNP3 Master will send a request to DNP3 outstation specifying the function codes to be sent. The outstation then sends the requested data back to the DNP3 Master.
−
−
On the ‘ADD NEW INSTANCE SECTION’ type the name of the instance. In this example we want to read the serial number, so we type ‘serial’.
−
−
[[File:Networking rutx11 example DNP3 requests configuration v1.png|border|class=tlt-border]]
−
−
−
Refer to [[RUTX11 DNP3#DNP3 Parameters|DNP3 Parameters]] and set the serial parameter.
−
−
The serial parameter is '5' with the group type 'octet string' and then ‘SAVE & APPLY’