Changes

DNP3 TCP Master (view source)

Revision as of 08:41, 27 June 2022

719 bytes removed ,  08:41, 27 June 2022
save
Line 14: Line 14:  
After that navigate to Services>DNP3
 
After that navigate to Services>DNP3
   −
[[File:Networking rutx11 example DNP3 service features v1.png|border|class=tlt-border]]
+
[[File:Networking rutx11 example DNP3 service features v1.png|boarder|class=tlt-boarder]]
      Line 22: Line 22:     
TCP Master requests specific information from DNP3 outstation through the communication channel.
 
TCP Master requests specific information from DNP3 outstation through the communication channel.
−
  −
      
To setup TCP MASTER click on the TCP Master Button and click ‘ADD’ to add a new master.
 
To setup TCP MASTER click on the TCP Master Button and click ‘ADD’ to add a new master.
Line 34: Line 32:     
[[File:Networking rutx11 example DNP3 tcp master configuration v1.png|border|class=tlt-border]]
 
[[File:Networking rutx11 example DNP3 tcp master configuration v1.png|border|class=tlt-border]]
−
  −
  −
'''Requests Configuration'''
  −
  −
To obtain data from DNP3 Outstation configure a DNP3 instance. The DNP3 Master will send a request to DNP3 outstation specifying the function codes to be sent. The outstation then sends the requested data back to the DNP3 Master.
  −
  −
On the ‘ADD NEW INSTANCE SECTION’ type the name of the instance. In this example we want to read the serial number, so we type ‘serial’.
  −
  −
[[File:Networking rutx11 example DNP3 requests configuration v1.png|border|class=tlt-border]]
  −
  −
  −
Refer to [[RUTX11 DNP3#DNP3 Parameters|DNP3 Parameters]] and set the serial parameter.
  −
  −
The serial parameter is '5' with the group type 'octet string' and then ‘SAVE & APPLY’
  −
  −
TCP MASTER should look like this.
 
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/92589"

Navigation menu