78
edits
Changes
no edit summary
After that navigate to Services>DNP3
After that navigate to Services>DNP3
[[File:Networking rutx11 example DNP3 service features v1.png|boarder|class=tlt-boarder]]
[[File:Networking rutx11 example DNP3 service features v1.png|border|class=tlt-border]]
TCP Master requests specific information from DNP3 outstation through the communication channel.
TCP Master requests specific information from DNP3 outstation through the communication channel.
To setup TCP MASTER click on the TCP Master Button and click ‘ADD’ to add a new master.
To setup TCP MASTER click on the TCP Master Button and click ‘ADD’ to add a new master.
[[File:Networking rutx11 example DNP3 tcp master configuration v1.png|border|class=tlt-border]]
[[File:Networking rutx11 example DNP3 tcp master configuration v1.png|border|class=tlt-border]]
'''Requests Configuration'''
To obtain data from DNP3 Outstation configure a DNP3 instance. The DNP3 Master will send a request to DNP3 outstation specifying the function codes to be sent. The outstation then sends the requested data back to the DNP3 Master.
On the ‘ADD NEW INSTANCE SECTION’ type the name of the instance. In this example we want to read the serial number, so we type ‘serial’.
[[File:Networking rutx11 example DNP3 requests configuration v1.png|border|class=tlt-border]]
Refer to [[RUTX11 DNP3#DNP3 Parameters|DNP3 Parameters]] and set the serial parameter.
The serial parameter is '5' with the group type 'octet string' and then ‘SAVE & APPLY’
TCP MASTER should look like this.
'''DNP3 OUTSTATION'''
A DNP3 Outstation component communicates with a single master via a communication channel.
To configure the DNP3 Outstation Go to Services> DNP3> DNP3 OUTSTATION
'''DNP3 OUTSTATION CONFIGURATION'''
[[File:Networking rutx11 example DNP3 dnp3 outstation configuration v1.png|border|class=tlt-border]]
