Difference between revisions of "Cobot.me Hotspot Configuration on RutOS firmware"
From Teltonika Networks Wiki
| Line 4: | Line 4: | ||
==Step 1: cobot.me configuration == | ==Step 1: cobot.me configuration == | ||
If you're having trouble finding this page or some of the parameters described here on your cobot account, you should turn on '''"Admin" mode'''. You can do that by clicking the "'''Admin'''" button at the top-right corner of the cobot website. | If you're having trouble finding this page or some of the parameters described here on your cobot account, you should turn on '''"Admin" mode'''. You can do that by clicking the "'''Admin'''" button at the top-right corner of the cobot website. | ||
| − | [[File:Cobotme.gif|border|center]] | + | [[File:Cobotme.gif|border|center|class=tlt-border]] |
===Login=== | ===Login=== | ||
---- | ---- | ||
First, go to '''cobot.me''' and log into your account ('''LOG IN''' in the top right corner). If you don't have a registered account, then you will need to create one - click '''Try Cobot'''. | First, go to '''cobot.me''' and log into your account ('''LOG IN''' in the top right corner). If you don't have a registered account, then you will need to create one - click '''Try Cobot'''. | ||
| − | [[File:Cobotmain.png|border|center|1009x1009px]] | + | [[File:Cobotmain.png|border|center|class=tlt-border|1009x1009px]] |
====Sign Up==== | ====Sign Up==== | ||
After clicking '''Try Cobot''' you will be redirected to the registration page. Enter you account information and click '''Next'''. | After clicking '''Try Cobot''' you will be redirected to the registration page. Enter you account information and click '''Next'''. | ||
| − | [[File:Cobotsignup3.png|border|center]] | + | [[File:Cobotsignup3.png|border|border|center|class=tlt-border]] |
Next step is to enter further information of your account. After entering it click '''Add Space'''. | Next step is to enter further information of your account. After entering it click '''Add Space'''. | ||
| − | [[File:Cobotsignup5.png|center]] | + | [[File:Cobotsignup5.png|border|center|class=tlt-border]] |
| − | |||
| − | |||
===Set Up new radius server=== | ===Set Up new radius server=== | ||
---- | ---- | ||
In the opened window click '''SETUP''' icon, then - '''Wifi Integration'''. You will be prompted to '''Radius Wifi Integration''' window. Click the '''Set up Radius Server.''' | In the opened window click '''SETUP''' icon, then - '''Wifi Integration'''. You will be prompted to '''Radius Wifi Integration''' window. Click the '''Set up Radius Server.''' | ||
| − | [[File:Imagea.png|border|center]] | + | [[File:Imagea.png|border|center|class=tlt-border]] |
===Network details=== | ===Network details=== | ||
| − | + | ---- | |
You will be given your Radius server configuration data that you will need in the next step. | You will be given your Radius server configuration data that you will need in the next step. | ||
| − | [[File:Radiuscobot.png|border|center|1150x1150px]] | + | [[File:Radiuscobot.png|border|center|class=tlt-border|1150x1150px]] |
===Add Wifi Guest Accounts=== | ===Add Wifi Guest Accounts=== | ||
| − | + | ---- | |
Click '''Wifi Guest Accounts''' in the bottom of the page to add accounts to let users access your WiFi. | Click '''Wifi Guest Accounts''' in the bottom of the page to add accounts to let users access your WiFi. | ||
| − | [[File:Cobotwifi.png|border|center|1098x1098px]] | + | [[File:Cobotwifi.png|border|center|class=tlt-border|1098x1098px]] |
Type user account information and click '''Add Account'''. | Type user account information and click '''Add Account'''. | ||
| − | [[File:Wifisuers.png|border|center|1095x1095px]] | + | [[File:Wifisuers.png|border|center|class=tlt-border|1095x1095px]] |
At the bottom of the page you can see all your created users. | At the bottom of the page you can see all your created users. | ||
| − | [[File:Accounts.png|border|center]] | + | [[File:Accounts.png|border|center|class=tlt-border]] |
==Step 2: Router configuration == | ==Step 2: Router configuration == | ||
| − | If you're having trouble finding | + | If you're having trouble finding any page or some of the parameters described here on your device's WebUI, you should turn on '''"Advanced WebUI"''' mode. You can do that by '''clicking''' the '''"Basic"''' button '''under''' '''"Mode,"''' which is located at the top-right corner of the WebUI. |
| − | [[File:Networking | + | [[File:Networking rut9 manual webui basic advanced mode.gif|border|center|class=tlt-border|1102x52px]] |
===Creating wireless access point=== | ===Creating wireless access point=== | ||
| − | + | ---- | |
If you have already set up your wireless access point - skip this step. | If you have already set up your wireless access point - skip this step. | ||
| Line 53: | Line 51: | ||
* '''Click 'Add'''' to create a new Wireless Access Point. Depending on your needs, choose a 2.4 GHz ('''1''') or 5 GHz ('''2''') Access Point. | * '''Click 'Add'''' to create a new Wireless Access Point. Depending on your needs, choose a 2.4 GHz ('''1''') or 5 GHz ('''2''') Access Point. | ||
| − | [[File: | + | [[File:WiFi interfaces.png|border|center|class=tlt-border|808x563px]] |
Edit your new Access Point as below: | Edit your new Access Point as below: | ||
| Line 59: | Line 57: | ||
# Check '''Enable;''' | # Check '''Enable;''' | ||
# Mode - '''Access Point'''; | # Mode - '''Access Point'''; | ||
| − | # ESSID - Your desired Extended Service Set Identifier name; | + | # '''ESSID''' - Your desired Extended Service Set Identifier name; |
| − | # Network - Choose the network you want to attach to this wireless interface or fill out the create field to define a new network. | + | # '''Network''' - Choose the network you want to attach to this wireless interface or fill out the create field to define a new network. |
| − | [[File: | + | [[File:Cobot WiFi interface.png|border|center|class=tlt-border|805x373px]] |
| − | + | Navigate to '''Wireless Security''' tab and choose your | |
| − | Navigate to '''Wireless Security''' tab and choose your '''Encryption''' | + | # '''Encryption method''' |
| + | # '''Cipher''' | ||
| + | # '''Password''' | ||
| + | [[File:Cobot WiFi interface security.png|border|center|class=tlt-border|808x269px]] | ||
| − | |||
===Set up hotspot=== | ===Set up hotspot=== | ||
| − | + | ---- | |
Navigate to '''''Services''' → '''Hotspot''''' and add a new Hotspot Instance. To do so, find the '''Add New Instance''' section and select your Wireless AP in the interface list, then press '''Add'''. | Navigate to '''''Services''' → '''Hotspot''''' and add a new Hotspot Instance. To do so, find the '''Add New Instance''' section and select your Wireless AP in the interface list, then press '''Add'''. | ||
| − | [[File: | + | [[File:Add hotspot.png||border|center|class=tlt-border|783x167px]] |
| − | |||
'''Hotspot configuration''' | '''Hotspot configuration''' | ||
| Line 78: | Line 77: | ||
# Check '''Enable;''' | # Check '''Enable;''' | ||
# Authentication mode - '''Radius'''. | # Authentication mode - '''Radius'''. | ||
| − | [[File: | + | [[File:Hotspot config.png|border|center|class=tlt-border|827x445px]] |
| − | |||
Then go to '''Radius''' tab and enter the Radius server configuration details from cobot: | Then go to '''Radius''' tab and enter the Radius server configuration details from cobot: | ||
| Line 85: | Line 83: | ||
# '''RADIUS Servers''' - 130.211.138.166, 104.198.250.153; | # '''RADIUS Servers''' - 130.211.138.166, 104.198.250.153; | ||
# '''Authentication port''' - 13143; | # '''Authentication port''' - 13143; | ||
| − | # '''Radius secret key''' | + | # '''Radius secret key''' |
| − | + | Then '''Save & Apply''' configuration. | |
| − | [[File: | + | [[File:Hotspot radius.png|border|center|class=tlt-border|827x495px]] |
==Test your Hotspot== | ==Test your Hotspot== | ||
| Line 98: | Line 96: | ||
* You should see a message '''Authorization Successful;''' | * You should see a message '''Authorization Successful;''' | ||
| − | [[File:Phonehostpotccobot.png|border|center]] | + | [[File:Phonehostpotccobot.png|border|center|class=tlt-border]] |
| − | |||
==See also== | ==See also== | ||
Latest revision as of 14:19, 27 March 2023
Main Page > IoT Platforms > IoT > Cobot.me Hotspot Configuration on RutOS firmwareSummary
This chapter is a guide on configuring cobot.me provider hotspot instance on RUTX routers. This setup is also applicable to RUT series devices.
Step 1: cobot.me configuration
If you're having trouble finding this page or some of the parameters described here on your cobot account, you should turn on "Admin" mode. You can do that by clicking the "Admin" button at the top-right corner of the cobot website.
Login
First, go to cobot.me and log into your account (LOG IN in the top right corner). If you don't have a registered account, then you will need to create one - click Try Cobot.
Sign Up
After clicking Try Cobot you will be redirected to the registration page. Enter you account information and click Next.
Next step is to enter further information of your account. After entering it click Add Space.
Set Up new radius server
In the opened window click SETUP icon, then - Wifi Integration. You will be prompted to Radius Wifi Integration window. Click the Set up Radius Server.
Network details
You will be given your Radius server configuration data that you will need in the next step.
Add Wifi Guest Accounts
Click Wifi Guest Accounts in the bottom of the page to add accounts to let users access your WiFi.
Type user account information and click Add Account.
At the bottom of the page you can see all your created users.
Step 2: Router configuration
If you're having trouble finding any page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode," which is located at the top-right corner of the WebUI.
Creating wireless access point
If you have already set up your wireless access point - skip this step.
- Login to your router's WebUI. You can do this by entering the router's LAN IP address (192.168.1.1 by default) into the URL field of your web browser.
- Go to the Network → Wireless page.
- Click 'Add' to create a new Wireless Access Point. Depending on your needs, choose a 2.4 GHz (1) or 5 GHz (2) Access Point.
Edit your new Access Point as below:
- Check Enable;
- Mode - Access Point;
- ESSID - Your desired Extended Service Set Identifier name;
- Network - Choose the network you want to attach to this wireless interface or fill out the create field to define a new network.
Navigate to Wireless Security tab and choose your
- Encryption method
- Cipher
- Password
Set up hotspot
Navigate to Services → Hotspot and add a new Hotspot Instance. To do so, find the Add New Instance section and select your Wireless AP in the interface list, then press Add.
Hotspot configuration
In the General tab do the following steps:
- Check Enable;
- Authentication mode - Radius.
Then go to Radius tab and enter the Radius server configuration details from cobot:
- RADIUS Servers - 130.211.138.166, 104.198.250.153;
- Authentication port - 13143;
- Radius secret key
Then Save & Apply configuration.
Test your Hotspot
Try connecting to your router using a computer or mobile phone.
- Select the newly created hotspot;
- After a successful connection, visit any website, and you will be redirected to the hotspot login page. Type your username and password;
- Click Login;
- You should see a message Authorization Successful;
