Difference between revisions of "OpenVPN Access Control"

From Teltonika Networks Wiki
m (Testing added)
(Topology changes)
 
(21 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
<h1>Introduction</h1>
+
<p style="color:red">The information on this page is updated in accordance with the [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.06.6'''] firmware version .</p>
  
−
In this example, we will configure an OpenVPN server, will let Client1 and Client2 communicate, while isolating Client3 only to be able to communicate with OpenVPN server
+
=Introduction=
  
−
<h1>Generating certificates for an OpenVPN server</h1>
+
Normally, OpenVPN Client access is controlled by enabling or disabling the Client to Client button in OpenVPN Servers configuration, however, at times, more granular control is required. In this example, we will configure an OpenVPN server with 3 Clients:
  
−
1)Navigate to '''System -> Administration -> Certificates'''
+
<ul>
 +
#<li> Client 1 will be able to communicate with Client 2 and OpenVPN server</li>
 +
#<li> Client 2 will be able to communicate with Client 1 and OpenVPN server</li>
 +
#<li> Client 3 will only be able to communicate with OpenVPN server, but not with any of other clients</li>
 +
</ul>
  
−
2)Generate 2 certificates . Recommended key size is at least 2048 bits for security reasons:
+
If You have trouble seeing any of the settings, be sure to enable "'''Advanced mode'''"
 +
[[File:Networking rutos manual webui basic advanced mode 75.gif|none|border|center|class=tlt-border]]
 +
=Topology=
  
−
2.1) CA
+
[[File:OpenVPN Topology v4.png|none|border|left|class=tlt-border|1000x1000px]]
  
−
2.2) Server
 
  
−
3) In Certificate Manager download Server certificate
+
<ul>
 +
<li> OpenVPN server tunnel address - 10.0.0.1, OpenVPN subnet - 10.0.0.0/27, LAN device address - 192.168.5.114</li>
 +
<li> Client 1 VPN tunnel address - 10.0.0.6, LAN device address - 192.168.10.216</li>
 +
<li> Client 2 VPN tunnel address - 10.0.0.10, LAN device address - 192.168.20.193</li>
 +
<li> Client 3 VPN tunnel address - 10.0.0.14, LAN device address - 192.168.30.178</li>
 +
</ul>
 +
=Generating certificates for an OpenVPN server=
 +
 
 +
Navigate to '''System → Administration → Certificates → Generate Certificate'''
 +
 
 +
Generate 2 certificates. Recommended key size is at least '''2048 bits''' for security reasons:
 +
 
 +
&emsp;1. CA
 +
 
 +
&emsp;2. Server
 +
 
 +
In Certificate Manager download Server certificate.
 +
 
 +
[[File:Certificate download v4.png|none|border|left|class=tlt-border|1100x1100px]]
 +
 
 +
For any OpenVPN clients, You will need to generate “'''Client'''” certificates, download the certificate and key, and send them to the client
  
 
There are multiple methods of how certificates could be generated, you could follow this tutorial instead:
 
There are multiple methods of how certificates could be generated, you could follow this tutorial instead:
 
[[How to generate TLS certificates (Windows)?]]
 
[[How to generate TLS certificates (Windows)?]]
 +
=Creating an OpenVPN server=
 +
 +
Navigate to '''Services -> VPN -> OpenVPN'''. Add a new OpenVPN instance with a '''Server role''' with these settings:
 +
 +
 +
[[File:OpenVPN server settings v3.png|none|border|left|class=tlt-border]]
  
−
[[File:Certificate download v2.png|none|thumb|alt=|1000x1000px]]
+
1 - <b>Client to client</b> – disabled
  
−
For any OpenVPN clients, You will need to generate “Client” certificates, download certificate and key, and send them to the client
+
2 - <b>Virtual network IP address</b> – 10.0.0.0
  
−
<h1>Creating an OpenVPN server</h1>
+
3 - <b>Virtual network netmask</b> – 255.255.255.224
  
−
1) Connect to WebUI and enable Advanced mode
+
4 - <b>Certificate files from device</b> - on
  
−
[[File:Networking rutos manual webui basic advanced mode 75.gif|none|thumb|alt=|1000x1000px]]
 
  
−
2) Navigate to '''Services -> VPN -> OpenVPN'''
+
Press '''"Save & Apply"''', enable OpenVPN server and check if the server is online.
  
−
3) Add a new OpenVPN instance with a Server role
+
[[File:OpenVPN server is online v3.png|none|border|left|class=tlt-border|1100x1100px]]
 +
=Connecting clients to the OpenVPN server=
  
−
4) Create an OpenVPN server with these settings
+
Navigate to '''Services -> VPN -> OpenVPN'''. Add a new OpenVPN instance with a '''Client role''' with these settings:
  
 +
[[File:OpenVPN Client1 v3.png|none|border|center|class=tlt-border]]
  
−
[[File:OpenVPN server settings v2.png|none|thumb|alt=|1000x1000px]]
+
&emsp;&emsp; 1 - '''Remote host/IP address''' - Public IP of the OpenVPN server's router
  
−
<ul>
+
&emsp;&emsp; 2 - '''Remote network IP address''' - 10.0.0.0
−
<li>Virtual network IP address – 10.0.0.0</li>
 
−
<li>Virtual network netmask – 255.255.255.224</li>
 
−
<li>Client to client – disabled</li>
 
−
<li>Certificate files from device - on</li>
 
−
</ul>
 
  
−
5) Press '''"Save & Apply"''', enable OpenVPN server and check if the server is online
+
&emsp;&emsp; 3 - '''Remote network netmask''' - 255.255.255.224
  
−
[[File:OpenVPN server is online v2.png|none|thumb|alt=|1000x1000px]]
+
&emsp;&emsp; 4 - '''Add the certificates from the OpenVPN server''' - Certificate Authority, Client certificate, and Client key which we downloaded in the Certificate Generation step.
  
−
<h1>Connecting clients to the OpenVPN server</h1>
 
  
−
1) Navigate to '''Services -> VPN -> OpenVPN'''
+
Press "'''Save & Apply'''", enable OpenVPN client, and check if the connection is made
  
−
2) Add a new OpenVPN instance with a Client role
+
[[File:OpenVPN Client1 connected v2.png|none|border|left|class=tlt-border|1100x1100px]]
  
−
3) Create an OpenVPN client with these settings
+
Repeat this step for as many clients as You need. For this example, we will have 3 clients.
 +
=Client to Client LAN network communication=
 +
==TLS Clients==
  
−
[[File:OpenVPN Client1 v2.png|none|thumb|alt=|1000x1000px]]
+
On the OpenVPN server router, navigate to '''Services -> VPN -> OpenVPN''', Press "'''Edit'''" on the server, scroll down and add '''TLS clients''' which LAN address You want to have access to, in our case, we add all 3 clients:
 +
===TLS Client 1===
 +
----
 +
[[File:TLS Client1 v3.png|none|border|left|class=tlt-border]]
 +
===TLS Client 2===
 +
----
 +
[[File:TLS Client2 v3.png|none|border|left|class=tlt-border]]
 +
===TLS Client 3===
 +
----
 +
[[File:TLS Client3 v3.png|none|border|left|class=tlt-border]]
  
 
<ul>
 
<ul>
−
<li>Remote host/IP address - Public IP of the OpenVPN server's router</li>
+
<li>'''Common name''' - common name of the certificate which was generated previously</li>
−
<li>Remote network IP address - 10.0.0.0</li>
+
<li>'''Virtual local endpoint''' - client’s local address in the virtual network</li>
−
<li>Remote network netmask - 255.255.255.224</li>
+
<li>'''Virtual remote endpoint''' - client’s remote address in the virtual network</li>
−
<li>And add the certificates from the OpenVPN server - Certificate Authority, Client certificate, and Client key which we downloaded in the Certificate Generation step</li>
+
<li>'''Private network''' - client's LAN subnet</li>
 +
<li>'''Covered network''' - Which LAN subnet should clients be able to communicate with in the OpenVPN server</li>
 
</ul>
 
</ul>
−
4) Press "Save & Apply", enable OpenVPN client and check if the connection is made
+
==Firewall Zones==
  
−
[[File:OpenVPN Client1 connected v2.png|none|thumb|alt=|1000x1000px]]
+
This step should be done on OpenVPN '''server and all clients''' that want their LAN subnets be accessible and to access other client's LAN subnets.
  
−
5) Repeat this step for as many clients as You need. For this example, we will have 3 clients
+
Navigate to '''Network -> Firewall -> General settings -> Zones''' and set OpenVPN zone to forward traffic to LAN.
  
−
<h1>Client to Client LAN network communication</h1>
+
[[File:OpenVPN to LAN zone forward v2.png|none|border|left|class=tlt-border|1100x1100px]]
 +
==Routes to LAN subnets==
  
−
1) On the OpenVPN server router, navigate to '''Services -> VPN -> OpenVPN''', Press "'''Edit'''" on the server, scroll down and add TLS clients
+
Create a route to other client LAN networks using WebUI. This step should be done on '''all clients''' that want their LAN subnets be accessible and to access other client's LAN subnets.
  
−
Add clients which LAN address You want to have access to, in our case, we add all 3 clients
 
  
−
[[File:TLS Client 1 v2.png|none|thumb|alt=|1000x1000px]]
+
Navigate to '''Services -> VPN -> OpenVPN''' press '''"Edit"''' on the OpenVPN client and add routes to other client LAN subnets. In this image, we are editing Client 1's configuration's extra options, to add routes to <b>Client 2's (192.168.20.0/24)</b> and <b>Client 3's (192.168.30.0/24)</b> LAN subnets.
−
[[File:TLS Client 2.png|none|thumb|alt=|1000x1000px]]
 
−
[[File:TLS Client 3.png|none|thumb|alt=|1000x1000px]]
 
  
 +
(In some cases, pushing routes to LAN addresses from the OpenVPN server to clients, breaks routing on the clients, so doing it from the client side is safer, but more time consuming)
  
−
<ul>
+
[[File:OpenVPN client routes v2.png|none|border|left|class=tlt-border]]
−
<li>Common name - common name of the certificate which was generated previously</li>
+
=Controlling access with firewall=
−
<li>Virtual local endpoint - client’s local address in the virtual network</li>
 
−
<li>Virtual remote endpoint - client’s remote address in the virtual network</li>
 
−
<li>Private network - client's LAN subnet</li>
 
−
<li>Covered network - Which LAN subnet should clients be able to communicate with in the OpenVPN server</li>
 
−
</ul>
 
  
−
This step should be done on OpenVPN server and all clients that want their LAN subnets be accessible and to access other client's LAN subnets
+
Navigate to '''Network -> Firewall -> Access Control''' and create a new deny rule. In this example, we are denying Client 3 from accessing any other clients and their LAN networks.
  
−
1) Navigate to '''Network -> Firewall -> General settings -> Zones''' and set OpenVPN zone to forward traffic to LAN
+
[[File:Deny Client3 rule v2.png|none|border|left|class=tlt-border]]
  
−
[[File:OpenVPN to LAN zone forward.png|none|thumb|alt=|1000x1000px]]
 
  
 +
&emsp;&emsp; 1 - '''Protocol''' - All protocols
  
 +
&emsp;&emsp; 2 - '''Source zone''' - OpenVPN
  
−
Create a route to other client LAN networks using WebUI. This step should be done on all <b>clients</b> that want their LAN subnets be accessible and to access other client's LAN subnets
+
&emsp;&emsp; 3 - '''Source IP''' - OpenVPN remote IP and LAN subnet of client 3
  
−
1) Navigate to '''Services -> VPN -> OpenVPN''' press '''"Edit"''' on the OpenVPN client and add routes to other client LAN subnets. In this image, we are editing Client 1's configuration, to add routes to Client 2's (192.168.20.0/24) and Client 3's (192.168.30.0/24) LAN subnets.
+
&emsp;&emsp; 4 - '''Destination zone''' - OpenVPN
  
−
[[File:OpenVPN client routes.png|none|thumb|alt=|1000x1000px]]
+
&emsp;&emsp; 5 - '''Destination address''' - other client OpenVPN remote endpoints and LAN subnets
  
−
<h1>Controlling access with firewall</h1>
+
&emsp;&emsp; 6 - '''Action''' - Deny
  
−
1) Navigate to '''Network -> Firewall -> Access Control'''
 
  
−
2) Create a new deny rule. In this example, we are denying Client 3 from accessing any other clients and their LAN networks
+
This rule will deny all traffic from Client 3 to other clients, but will not interact with traffic, if it's destination is OpenVPN server or it's LAN subnet.
 +
=Testing the setup=
  
−
[[File:Deny Client3 rule.png|none|thumb|alt=|1000x1000px]]
+
If You have followed the steps correctly, configuration should be finished. These should be the results that You will be getting:
  
−
<ul>
 
−
<li>Source interface - OpenVPN</li>
 
−
<li>Destination interface - OpenVPN</li>
 
−
<li>Source IP - OpenVPN remote IP and LAN subnet of client 3</li>
 
−
<li>Destination IP - other client OpenVPN remote endpoints and LAN subnets</li>
 
−
<li>Action - Deny</li>
 
−
</ul>
 
−
This rule will deny all traffic from Client 3 to other clients, but will not interact with traffic, if it's destination is OpenVPN server or it's LAN subnet
 
−
 
−
 
−
<h1>Testing the setup</h1>
 
  
 
Client 1 to Client 2
 
Client 1 to Client 2
  
−
  Pinging 192.168.20.193 with 32 bytes of data:
+
  Pinging 192.168.20.193 from 192.168.10.216 with 32 bytes of data:
 
  Reply from 192.168.20.194: bytes=32 time=172ms TTL=125
 
  Reply from 192.168.20.194: bytes=32 time=172ms TTL=125
 
  Reply from 192.168.20.194: bytes=32 time=114ms TTL=125
 
  Reply from 192.168.20.194: bytes=32 time=114ms TTL=125
Line 133: Line 155:
 
Client 1 to Client 3
 
Client 1 to Client 3
  
−
  Pinging 192.168.30.178 with 32 bytes of data:
+
  Pinging 192.168.30.178 from 192.168.10.216 with 32 bytes of data:
 
  Request timed out.
 
  Request timed out.
 
  Request timed out.
 
  Request timed out.
Line 141: Line 163:
 
Client 2 to Client 1
 
Client 2 to Client 1
  
−
  Pinging 192.168.10.216 with 32 bytes of data:
+
  Pinging 192.168.10.216 from 192.168.20.193 with 32 bytes of data:
 
  Reply from 192.168.10.216: bytes=32 time=185ms TTL=125
 
  Reply from 192.168.10.216: bytes=32 time=185ms TTL=125
 
  Reply from 192.168.10.216: bytes=32 time=123ms TTL=125
 
  Reply from 192.168.10.216: bytes=32 time=123ms TTL=125
Line 149: Line 171:
 
Client 2 to Client 3
 
Client 2 to Client 3
  
−
  Pinging 192.168.30.178 with 32 bytes of data:
+
  Pinging 192.168.30.178 from 192.168.20.193 with 32 bytes of data:
 
  Request timed out.
 
  Request timed out.
 
  Request timed out.
 
  Request timed out.
Line 157: Line 179:
 
Client 3 to Client 1
 
Client 3 to Client 1
  
−
  Pinging 192.168.10.216 with 32 bytes of data:
+
  Pinging 192.168.10.216 from 192.168.30.178 with 32 bytes of data:
 
  Request timed out.
 
  Request timed out.
 
  Request timed out.
 
  Request timed out.
Line 165: Line 187:
 
Client 3 to Client 2
 
Client 3 to Client 2
  
−
  Pinging 192.168.20.193 with 32 bytes of data:
+
  Pinging 192.168.20.193 from 192.168.30.178 with 32 bytes of data:
 
  Request timed out.
 
  Request timed out.
 
  Request timed out.
 
  Request timed out.
Line 173: Line 195:
 
And server can reach all of the clients and their LAN subnets
 
And server can reach all of the clients and their LAN subnets
  
−
  Pinging 192.168.10.216 with 32 bytes of data:
+
  Pinging 192.168.10.216 from 192.168.5.114 with 32 bytes of data:
−
 
 
  Reply from 192.168.5.114: bytes=32 time=264ms TTL=62
 
  Reply from 192.168.5.114: bytes=32 time=264ms TTL=62
 
  Reply from 192.168.5.114: bytes=32 time=138ms TTL=62
 
  Reply from 192.168.5.114: bytes=32 time=138ms TTL=62
Line 180: Line 201:
 
  Reply from 192.168.5.114: bytes=32 time=107ms TTL=62
 
  Reply from 192.168.5.114: bytes=32 time=107ms TTL=62
 
   
 
   
−
  Pinging 192.168.20.193 with 32 bytes of data:
+
  Pinging 192.168.20.193 from 192.168.5.114 with 32 bytes of data:
−
 
 
  Reply from 192.168.5.114: bytes=32 time=61ms TTL=62
 
  Reply from 192.168.5.114: bytes=32 time=61ms TTL=62
 
  Reply from 192.168.5.114: bytes=32 time=376ms TTL=62
 
  Reply from 192.168.5.114: bytes=32 time=376ms TTL=62
Line 187: Line 207:
 
  Reply from 192.168.5.114: bytes=32 time=232ms TTL=62
 
  Reply from 192.168.5.114: bytes=32 time=232ms TTL=62
 
   
 
   
−
  Pinging 192.168.30.178 with 32 bytes of data:
+
  Pinging 192.168.30.178 from 192.168.5.114 with 32 bytes of data:
−
 
 
  Reply from 192.168.5.114: bytes=32 time=226ms TTL=62
 
  Reply from 192.168.5.114: bytes=32 time=226ms TTL=62
 
  Reply from 192.168.5.114: bytes=32 time=327ms TTL=62
 
  Reply from 192.168.5.114: bytes=32 time=327ms TTL=62
Line 196: Line 215:
 
<br>
 
<br>
  
−
<h1>See also</h1>
+
=See also=
 +
 
 
<ul>
 
<ul>
 
<li>[[OpenVPN_configuration_examples_RUT_R_00.07]]</li>
 
<li>[[OpenVPN_configuration_examples_RUT_R_00.07]]</li>
Line 205: Line 225:
 
<li>[[OpenVPN traffic split]]</li>
 
<li>[[OpenVPN traffic split]]</li>
 
<li>[[Configuration file .ovpn upload tutorial]]</li>
 
<li>[[Configuration file .ovpn upload tutorial]]</li>
 +
<li>[[Firewall traffic rules]]</li>
 
</ul>
 
</ul>
  
  
−
<h1>External links</h1>
+
=External links=
  
−
https://openvpn.net/index.php/open-source/documentation/howto.html - some additional information on OpenVPNs
+
https://openvpn.net/index.php/open-source/documentation/howto.html - some additional information on OpenVPN

Latest revision as of 14:55, 9 April 2024

The information on this page is updated in accordance with the 00.07.06.6 firmware version .

Introduction

Normally, OpenVPN Client access is controlled by enabling or disabling the Client to Client button in OpenVPN Servers configuration, however, at times, more granular control is required. In this example, we will configure an OpenVPN server with 3 Clients:

    2. Client 1 will be able to communicate with Client 2 and OpenVPN server
    4. Client 2 will be able to communicate with Client 1 and OpenVPN server
    6. Client 3 will only be able to communicate with OpenVPN server, but not with any of other clients

If You have trouble seeing any of the settings, be sure to enable "Advanced mode"

Networking rutos manual webui basic advanced mode 75.gif

Topology

OpenVPN Topology v4.png


  • OpenVPN server tunnel address - 10.0.0.1, OpenVPN subnet - 10.0.0.0/27, LAN device address - 192.168.5.114
  • Client 1 VPN tunnel address - 10.0.0.6, LAN device address - 192.168.10.216
  • Client 2 VPN tunnel address - 10.0.0.10, LAN device address - 192.168.20.193
  • Client 3 VPN tunnel address - 10.0.0.14, LAN device address - 192.168.30.178

Generating certificates for an OpenVPN server

Navigate to System → Administration → Certificates → Generate Certificate

Generate 2 certificates. Recommended key size is at least 2048 bits for security reasons:

 1. CA

 2. Server

In Certificate Manager download Server certificate.

Certificate download v4.png

For any OpenVPN clients, You will need to generate “Client” certificates, download the certificate and key, and send them to the client

There are multiple methods of how certificates could be generated, you could follow this tutorial instead: How to generate TLS certificates (Windows)?

Creating an OpenVPN server

Navigate to Services -> VPN -> OpenVPN. Add a new OpenVPN instance with a Server role with these settings:


OpenVPN server settings v3.png

1 - Client to client – disabled

2 - Virtual network IP address – 10.0.0.0

3 - Virtual network netmask – 255.255.255.224

4 - Certificate files from device - on


Press "Save & Apply", enable OpenVPN server and check if the server is online.

OpenVPN server is online v3.png

Connecting clients to the OpenVPN server

Navigate to Services -> VPN -> OpenVPN. Add a new OpenVPN instance with a Client role with these settings:

OpenVPN Client1 v3.png

   1 - Remote host/IP address - Public IP of the OpenVPN server's router

   2 - Remote network IP address - 10.0.0.0

   3 - Remote network netmask - 255.255.255.224

   4 - Add the certificates from the OpenVPN server - Certificate Authority, Client certificate, and Client key which we downloaded in the Certificate Generation step.


Press "Save & Apply", enable OpenVPN client, and check if the connection is made

OpenVPN Client1 connected v2.png

Repeat this step for as many clients as You need. For this example, we will have 3 clients.

Client to Client LAN network communication

TLS Clients

On the OpenVPN server router, navigate to Services -> VPN -> OpenVPN, Press "Edit" on the server, scroll down and add TLS clients which LAN address You want to have access to, in our case, we add all 3 clients:

TLS Client 1

TLS Client1 v3.png

TLS Client 2

TLS Client2 v3.png

TLS Client 3

TLS Client3 v3.png
  • Common name - common name of the certificate which was generated previously
  • Virtual local endpoint - client’s local address in the virtual network
  • Virtual remote endpoint - client’s remote address in the virtual network
  • Private network - client's LAN subnet
  • Covered network - Which LAN subnet should clients be able to communicate with in the OpenVPN server

Firewall Zones

This step should be done on OpenVPN server and all clients that want their LAN subnets be accessible and to access other client's LAN subnets.

Navigate to Network -> Firewall -> General settings -> Zones and set OpenVPN zone to forward traffic to LAN.

OpenVPN to LAN zone forward v2.png

Routes to LAN subnets

Create a route to other client LAN networks using WebUI. This step should be done on all clients that want their LAN subnets be accessible and to access other client's LAN subnets.


Navigate to Services -> VPN -> OpenVPN press "Edit" on the OpenVPN client and add routes to other client LAN subnets. In this image, we are editing Client 1's configuration's extra options, to add routes to Client 2's (192.168.20.0/24) and Client 3's (192.168.30.0/24) LAN subnets.

(In some cases, pushing routes to LAN addresses from the OpenVPN server to clients, breaks routing on the clients, so doing it from the client side is safer, but more time consuming)

OpenVPN client routes v2.png

Controlling access with firewall

Navigate to Network -> Firewall -> Access Control and create a new deny rule. In this example, we are denying Client 3 from accessing any other clients and their LAN networks.

Deny Client3 rule v2.png


   1 - Protocol - All protocols

   2 - Source zone - OpenVPN

   3 - Source IP - OpenVPN remote IP and LAN subnet of client 3

   4 - Destination zone - OpenVPN

   5 - Destination address - other client OpenVPN remote endpoints and LAN subnets

   6 - Action - Deny


This rule will deny all traffic from Client 3 to other clients, but will not interact with traffic, if it's destination is OpenVPN server or it's LAN subnet.

Testing the setup

If You have followed the steps correctly, configuration should be finished. These should be the results that You will be getting:


Client 1 to Client 2 

Pinging 192.168.20.193 from 192.168.10.216 with 32 bytes of data:
Reply from 192.168.20.194: bytes=32 time=172ms TTL=125
Reply from 192.168.20.194: bytes=32 time=114ms TTL=125
Reply from 192.168.20.194: bytes=32 time=113ms TTL=125
Reply from 192.168.20.194: bytes=32 time=294ms TTL=125

Client 1 to Client 3 

Pinging 192.168.30.178 from 192.168.10.216 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.

Client 2 to Client 1 

Pinging 192.168.10.216 from 192.168.20.193 with 32 bytes of data:
Reply from 192.168.10.216: bytes=32 time=185ms TTL=125
Reply from 192.168.10.216: bytes=32 time=123ms TTL=125
Reply from 192.168.10.216: bytes=32 time=227ms TTL=125
Reply from 192.168.10.216: bytes=32 time=189ms TTL=125

Client 2 to Client 3 

Pinging 192.168.30.178 from 192.168.20.193 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.

Client 3 to Client 1 

Pinging 192.168.10.216 from 192.168.30.178 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.

Client 3 to Client 2 

Pinging 192.168.20.193 from 192.168.30.178 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.

And server can reach all of the clients and their LAN subnets 

Pinging 192.168.10.216 from 192.168.5.114 with 32 bytes of data:
Reply from 192.168.5.114: bytes=32 time=264ms TTL=62
Reply from 192.168.5.114: bytes=32 time=138ms TTL=62
Reply from 192.168.5.114: bytes=32 time=81ms TTL=62
Reply from 192.168.5.114: bytes=32 time=107ms TTL=62

Pinging 192.168.20.193 from 192.168.5.114 with 32 bytes of data:
Reply from 192.168.5.114: bytes=32 time=61ms TTL=62
Reply from 192.168.5.114: bytes=32 time=376ms TTL=62
Reply from 192.168.5.114: bytes=32 time=132ms TTL=62
Reply from 192.168.5.114: bytes=32 time=232ms TTL=62

Pinging 192.168.30.178 from 192.168.5.114 with 32 bytes of data:
Reply from 192.168.5.114: bytes=32 time=226ms TTL=62
Reply from 192.168.5.114: bytes=32 time=327ms TTL=62
Reply from 192.168.5.114: bytes=32 time=111ms TTL=62
Reply from 192.168.5.114: bytes=32 time=80ms TTL=62


See also


External links

https://openvpn.net/index.php/open-source/documentation/howto.html - some additional information on OpenVPN

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=OpenVPN_Access_Control&oldid=123341"