0
edits
Changes
no edit summary
Under '''DHCP SERVER''' set parameters for the DHCP pool.
Under '''DHCP SERVER''' set parameters for the DHCP pool.
===Set up Mobile WAN as Main WAN ===
[[File:Server new 02.png|border|class=tlt-border|750x750px]]
===Set up Mobile WAN as Main WAN===
Enter to the router’s WebUI, go to '''Network > Interfaces''' press mouse click on the Mobile Wan interface, then drag it to the 1<sup>st</sup> position and then press '''Save & Apply'''.
Enter to the router’s WebUI, go to '''Network > Interfaces''' press mouse click on the Mobile Wan interface, then drag it to the 1<sup>st</sup> position and then press '''Save & Apply'''.
[[File:Server new 03.png|alt=Mobile WAN as Main WAN|center|thumb|504x504px|Mobile WAN as Main WAN]]
[[File:Server new 03.png|alt=Mobile WAN as Main WAN|center|thumb|504x504px|Mobile WAN as Main WAN]]
===Create L2TPv3 instance ===
===Create L2TPv3 instance===
Go to router’s WebUI, under '''Service > VPN > L2TP > L2TPv3''' and create new '''L2TPV3''' instance.
Go to router’s WebUI, under '''Service > VPN > L2TP > L2TPv3''' and create new '''L2TPV3''' instance.
[[File:Server new 04 02.png|alt=L2TPv3 Server Settings|center|thumb|480x480px|L2TPv3 Server Settings]]Specify the Local address of your mobile WAN. Local value for Tunnel ID, session ID and Cookie must match with the peer values being used at the other end.
[[File:Server new 04 02.png|alt=L2TPv3 Server Settings|center|thumb|480x480px|L2TPv3 Server Settings]]Specify the Local address of your mobile WAN. Local value for Tunnel ID, session ID and Cookie must match with the peer values being used at the other end.
==DHCP Client Settings (Relay)==
==DHCP Client Settings (Relay) ==
===DHCP Relay ===
===DHCP Relay===
Enter the router's WebUI, go to '''Network > Interface > LAN > DHCP Server''' and change the "'''Enable DHCP'''" field value from Enable to Relay and type in the DHCP Server the IP address of the server. Click Save & Apply.
Enter the router's WebUI, go to '''Network > Interface > LAN > DHCP Server''' and change the "'''Enable DHCP'''" field value from Enable to Relay and type in the DHCP Server the IP address of the server. Click Save & Apply.
[[File:Client 01.png|alt=Enable DHCP Relay|center|thumb|517x517px|Enable DHCP Relay]]
[[File:Client 01.png|alt=Enable DHCP Relay|center|thumb|517x517px|Enable DHCP Relay]]
'''Note:''' The IPv4 address of the LAN interface is different from the server's LAN interface address, this is necessary to avoid conflicts.
'''Note:''' The IPv4 address of the LAN interface is different from the server's LAN interface address, this is necessary to avoid conflicts.
===Set up Mobile WAN as Main WAN ===
===Set up Mobile WAN as Main WAN===
Enter to the router’s WebUI, go to '''Network > Interfaces''' press mouse click on the Mobile Wan interface, then drag it to the 1<sup>st</sup> position and then press '''Save & Apply'''.
Enter to the router’s WebUI, go to '''Network > Interfaces''' press mouse click on the Mobile Wan interface, then drag it to the 1<sup>st</sup> position and then press '''Save & Apply'''.
[[File:Client 02.png|alt=Mobile WAN as Main WAN|center|thumb|545x545px|Mobile WAN as Main WAN]]
[[File:Client 02.png|alt=Mobile WAN as Main WAN|center|thumb|545x545px|Mobile WAN as Main WAN]]
===Modify Enable-DHCP-renew firewall rule ===
===Modify Enable-DHCP-renew firewall rule===
Enter in the router’s WebUI, go to '''Network > Firewall > Traffic rules''' to additionally allow destination port 67.
Enter in the router’s WebUI, go to '''Network > Firewall > Traffic rules''' to additionally allow destination port 67.
[[File:Client 03.png|alt=DHCP renew firewall rule|center|thumb|555x555px|DHCP renew firewall rule]]
[[File:Client 03.png|alt=DHCP renew firewall rule|center|thumb|555x555px|DHCP renew firewall rule]]
===Create L2TPv3 instance ===
===Create L2TPv3 instance===
Go to router’s WebUI, under '''Service > VPN > L2TP > L2TPv3''' and create new '''L2TPV3''' instance.
Go to router’s WebUI, under '''Service > VPN > L2TP > L2TPv3''' and create new '''L2TPV3''' instance.
