Line 17: |
Line 17: |
| | | |
| === DHCP Pool === | | === DHCP Pool === |
− | Enter the router's WebUI, go to '''Network > Interfaces > Ethernet LAN''' and click the '''<nowiki/>'Edit'''' button on the right side of the interface to set the LAN network address. | + | Enter the router's WebUI, go to '''Network → Interfaces → Ethernet LAN''' and click the '''<nowiki/>'Edit'''' button on the right side of the interface to set the LAN network address. |
| | | |
| [[File:Server new 01 fixed.png|border|class=tlt-border|750x750px]] | | [[File:Server new 01 fixed.png|border|class=tlt-border|750x750px]] |
Line 26: |
Line 26: |
| | | |
| ===Set up Mobile WAN as Main WAN=== | | ===Set up Mobile WAN as Main WAN=== |
− | Enter to the router’s WebUI, go to '''Network > Interfaces''' press mouse click on the Mobile Wan interface, then drag it to the 1<sup>st</sup> position and then press '''Save & Apply'''. | + | Enter to the router’s WebUI, go to '''Network → Interfaces''' press mouse click on the Mobile Wan interface, then drag it to the 1<sup>st</sup> position and then press '''Save & Apply'''. |
| [[File:Server new 03.png|alt=Mobile WAN as Main WAN|center|thumb|504x504px|Mobile WAN as Main WAN]] | | [[File:Server new 03.png|alt=Mobile WAN as Main WAN|center|thumb|504x504px|Mobile WAN as Main WAN]] |
| | | |
| ===Create L2TPv3 instance=== | | ===Create L2TPv3 instance=== |
− | Go to router’s WebUI, under '''Service > VPN > L2TP > L2TPv3''' and create new '''L2TPV3''' instance. | + | Go to router’s WebUI, under '''Service → VPN → L2TP → L2TPv3''' and create new '''L2TPV3''' instance. |
| | | |
| '''LOCAL SETTING''' | | '''LOCAL SETTING''' |
Line 68: |
Line 68: |
| | | |
| ===DHCP Relay=== | | ===DHCP Relay=== |
− | Enter the router's WebUI, go to '''Network > Interface > LAN > DHCP Server''' and change the "'''Enable DHCP'''" field value from Enable to Relay and type in the DHCP Server the IP address of the server. Click Save & Apply. | + | Enter the router's WebUI, go to '''Network → Interface → LAN → DHCP Server''' and change the "'''Enable DHCP'''" field value from Enable to Relay and type in the DHCP Server the IP address of the server. Click Save & Apply. |
| [[File:Client 01.png|alt=Enable DHCP Relay|center|thumb|517x517px|Enable DHCP Relay]] | | [[File:Client 01.png|alt=Enable DHCP Relay|center|thumb|517x517px|Enable DHCP Relay]] |
| '''Note:''' The IPv4 address of the LAN interface is different from the server's LAN interface address, this is necessary to avoid conflicts. | | '''Note:''' The IPv4 address of the LAN interface is different from the server's LAN interface address, this is necessary to avoid conflicts. |
| | | |
| ===Set up Mobile WAN as Main WAN=== | | ===Set up Mobile WAN as Main WAN=== |
− | Enter to the router’s WebUI, go to '''Network > Interfaces''' press mouse click on the Mobile Wan interface, then drag it to the 1<sup>st</sup> position and then press '''Save & Apply'''. | + | Enter to the router’s WebUI, go to '''Network → Interfaces''' press mouse click on the Mobile Wan interface, then drag it to the 1<sup>st</sup> position and then press '''Save & Apply'''. |
| [[File:Client 02.png|alt=Mobile WAN as Main WAN|center|thumb|545x545px|Mobile WAN as Main WAN]] | | [[File:Client 02.png|alt=Mobile WAN as Main WAN|center|thumb|545x545px|Mobile WAN as Main WAN]] |
| | | |
| ===Modify Enable-DHCP-renew firewall rule=== | | ===Modify Enable-DHCP-renew firewall rule=== |
− | Enter in the router’s WebUI, go to '''Network > Firewall > Traffic rules''' to additionally allow destination port 67. | + | Enter in the router’s WebUI, go to '''Network → Firewall → Traffic rules''' to additionally allow destination port 67. |
| [[File:Client 03.png|alt=DHCP renew firewall rule|center|thumb|555x555px|DHCP renew firewall rule]] | | [[File:Client 03.png|alt=DHCP renew firewall rule|center|thumb|555x555px|DHCP renew firewall rule]] |
| | | |
| ===Create L2TPv3 instance=== | | ===Create L2TPv3 instance=== |
− | Go to router’s WebUI, under '''Service > VPN > L2TP > L2TPv3''' and create new '''L2TPV3''' instance. | + | Go to router’s WebUI, under '''Service → VPN → L2TP → L2TPv3''' and create new '''L2TPV3''' instance. |
| | | |
| '''LOCAL SETTING''' | | '''LOCAL SETTING''' |