To access the I/O pins and power the device at the same time you would likely need one of these adaptors from our Accessor
..., make sure to ground only one relay and the device (these can be grounded at the same spot), notice that the secondary relay (on the right) gets ground
7 KB (1,058 words) - 11:22, 28 August 2023
...continuation of the previous New Port Forward Rule example, where we look at the configuration of the newly created rule.
<td>Matches incoming traffic directed at the given IP address only</td>
30 KB (4,410 words) - 12:37, 24 October 2023
...continuation of the previous New Port Forward Rule example, where we look at the configuration of the newly created rule.
<td>Matches incoming traffic directed at the given IP address only</td>
31 KB (4,475 words) - 12:38, 24 October 2023
Before we begin, let's take a look at the configuration that we are attempting to achieve and the prerequisites t
...You can do that by clicking the "'''Advanced'''" button, which is located at the top-right corner of the WebUI.
11 KB (1,682 words) - 09:23, 7 November 2023
...otocol" you need select "DHCP" and leave all other config settings for WAN at the defaults. The IP address is assigned by Starlink and will appear on the
...ant Starlink to be your primary connection, make sure the WAN interface is at the top of the list in Network → Interfaces → General.
11 KB (1,605 words) - 09:05, 15 November 2023
Routers are key components of any network, whether at home or in an enterprise environment. They are responsible for connecting m
* Network Layer. Routers operate at the network layer (Layer 3) of the OSI model, providing interconnectivity b
6 KB (805 words) - 10:44, 24 November 2023
At the top of your screen, you will get a notification: '''Company created'''.
* You can remove multiple companies at the same time.
6 KB (890 words) - 13:05, 29 November 2023
...ceiving an error, open physical device instance, and press the TEST button at the bottom. It will provide a more specific error message:<br>
...in question. More information about it can be found in the sources linked at the end of the article.
10 KB (1,652 words) - 14:43, 30 November 2023
are approved by AT&T for use on the First Responder Network.
...i>[https://c2m-projectone.att.com/PartnerCatalog/iotcertifieddevices.aspx AT&T IoT Device Catalog]</li>
719 bytes (93 words) - 11:13, 17 May 2024
...ng and encrypting each IP packet within a communication session. Operating at the network layer, IPsec protects and authenticates IP packets between devi
• At least one router must have a Public Static or Public Dynamic IP address
4 KB (678 words) - 10:12, 21 May 2024
|Undertegnede TELTONIKA NETWORKS erklærer herved, at følgende udstyr TSF010 overholder de væsentlige krav og øvrige relevante
|TELTONIKA NETWORKS Erklærer herved at TSF010 er i samsvar med de grunnleggende krav og øvrige relevante krav i d
13 KB (1,735 words) - 14:01, 11 June 2024
*** Fixed Modbus TCP Over Serial Gateway crash occurring at start up in some edge cases
** Added the possibility to unblock multiple blocked devices at once
88 KB (12,515 words) - 15:20, 25 June 2024
*** Numeric mode support for modem AT commands
** Fixed AT command for SMS storage usage
79 KB (11,381 words) - 15:24, 25 June 2024
*** Numeric mode support for modem AT commands
** Fixed AT command for SMS storage usage
69 KB (9,874 words) - 15:24, 25 June 2024
*** Numeric mode support for modem AT commands
** Fixed AT command for SMS storage usage
94 KB (13,401 words) - 15:24, 25 June 2024
*** Numeric mode support for modem AT commands
** Fixed AT command for SMS storage usage
78 KB (11,227 words) - 15:24, 25 June 2024
*** Numeric mode support for modem AT commands
** Fixed AT command for SMS storage usage
80 KB (11,525 words) - 15:25, 25 June 2024
*** Numeric mode support for modem AT commands
** Fixed AT command for SMS storage usage
69 KB (9,883 words) - 15:25, 25 June 2024
*** Numeric mode support for modem AT commands
** Fixed AT command for SMS storage usage
85 KB (12,196 words) - 15:25, 25 June 2024
.../uboot.html'''). This may not work if have connected to the router's WebUI at least once before, since the URL's path may be cached. To solve this proble
7 KB (1,143 words) - 17:14, 19 January 2022
