*** Zerotier: added backup WAN interface blacklisting if WAN failover is enabled
*** DHCP: removed default disabled server configuration for WAN interface
13 KB (1,748 words) - 15:11, 12 June 2024
...for the RUT device. '''Fortinet''' has a LAN subnet of 192.168.5.0/24 and WAN subnet of 192.168.10.2/24 configured on it, which should be reachable by th
...or basic internet access. '''RUT''' has a LAN subnet of 192.168.1.0/24 and WAN subnet of 192.168.10.1/24 configured on it.
12 KB (1,630 words) - 10:13, 20 June 2024
<td>Show WAN IP at login page</td>
<td>Shows the router's WAN IP address at login page.</td>
17 KB (2,583 words) - 15:09, 10 December 2020
WAN Type and IP
Mobile and WAN information are sent from “stream” Lua script, while Device information
11 KB (1,631 words) - 07:18, 3 September 2020
...article provides step-by-step instructions on how to set up an additional WAN connection by connecting a USB modem to the USB port of a RUT955 router.
...→ [[RUT955 WAN|WAN]]</b> page and set the Modem to act as the Main WAN or WAN Failover connection and Save the settings:<br>[[File:Additional modem setup
1 KB (190 words) - 15:31, 17 January 2020
...ble from spokes (HUB must have Public IP address, or has to be in the same WAN network as Spokes)</li>
#Enter '''HUB Address''' (HUB WAN IP).
5 KB (807 words) - 14:27, 16 August 2022
...navigating to the '''Network → WAN''' section. From there, simply select a WAN option that is not Mobile and click the "Save" button.
2 KB (351 words) - 11:04, 10 June 2020
===WAN Interface===
If a WAN interface on your device has a public IP address, you can reach the WebUI e
4 KB (636 words) - 16:08, 28 February 2024
* Both RUTxxx routers must be accessible from each other's WAN connection
[Image Here showing RUT1 & RUT2 connected via Wan connection]
8 KB (1,237 words) - 04:52, 18 June 2024
<td>Main {{!}} WAN {{!}} WAN2 {{!}} WAN3; Default: '''WAN'''</td>
...ired) {{!}} WAN2(Mobile) {{!}} WAN3(WiFi) {{!}} VPN instances; Default: '''WAN(wired)'''</td>
15 KB (2,070 words) - 10:02, 20 December 2018
* WAN Type
* WAN IP
10 KB (1,529 words) - 14:24, 25 August 2020
<td>Main | WAN | WAN2 | WAN3; Default: '''WAN'''</td>
...>LAN | WAN(wired) | WAN2(Mobile) | WAN3(WiFi) | VPN instances; Default: '''WAN(wired)'''</td>
3 KB (371 words) - 11:48, 7 May 2020
#Select '''Tunnel source''' (select your WAN interface).
#Enter '''Remote endpoint IP address''' (Cisco WAN IP).
3 KB (466 words) - 16:46, 30 March 2020
| mobile = 1 <!-- 1 - has mobile WAN; 0 - doesn't have mobile WAN -->
| wired = 1 <!-- 1 - has wired WAN; 0 - doesn't have wired WAN -->
486 bytes (59 words) - 13:35, 3 September 2020
<td>Use WAN port as LAN</td>
...the router's WAN port will act as if it were a LAN port. '''Works only if WAN is not set to wired'''</td>
11 KB (1,735 words) - 11:35, 19 July 2021
| mobile = 1 <!-- 1 - has mobile WAN; 0 - doesn't have mobile WAN -->
| wired = 1 <!-- 1 - has wired WAN; 0 - doesn't have wired WAN -->
715 bytes (90 words) - 11:43, 19 July 2021
| mobile = 1 <!-- 1 - has mobile WAN; 0 - doesn't have mobile WAN -->
| wired = 1 <!-- 1 - has wired WAN; 0 - doesn't have wired WAN -->
715 bytes (90 words) - 14:26, 18 November 2021
...ddress. This can be done by changing the IP address parameter on Network → WAN page:
[[File:ExampleModSlave1Edit.png|border|class=tlt-border|center|Slave Device WAN configuration]]
13 KB (1,949 words) - 10:17, 25 April 2022
DHCP Relay device WAN port needs to be connected to DHCP server LAN port.
WAN IP: 192.168.4.194
3 KB (414 words) - 14:41, 2 August 2023
...example is based on a local configuration, but also can be used via wired WAN or a remote installation with Public IP'')
....168.1.1), if you're trying to reach the router from WAN, use the router's WAN IP address.
19 KB (2,713 words) - 14:42, 2 August 2023
