Difference between revisions of "DHCP RELAY over L2TPv3"
From Teltonika Networks Wiki
(Introduction and prerequisites) |
(Update) |
||
| Line 10: | Line 10: | ||
* A PC acting as a Host for testing | * A PC acting as a Host for testing | ||
* Both routers must have a Public Static or Public Dynamic IP addresses | * Both routers must have a Public Static or Public Dynamic IP addresses | ||
| + | |||
| + | == Configuration Scheme == | ||
| + | I will paste a Topology Image here | ||
| + | |||
| + | == DHCP Server Settings == | ||
| + | |||
| + | === DHCP Pool === | ||
| + | Enter the router's WebUI, go to '''Network > Interfaces > Ethernet LAN''' and click the '''<nowiki/>'Edit'''' button on the right side of the interface to modify the DHCP Pool. | ||
Revision as of 01:53, 19 March 2022
Main Page > General Information > Configuration Examples > Use cases > DHCP RELAY over L2TPv3Introduction
A DHCP relay agent allows the DHCP clients to obtain IP addresses from a DHCP server that is not configured on the same LAN.
This article provides a configuration example with details on how to set-up a DHCP relay over a L2TPv3 VPN.
Prerequisites
You will need:
- Two RUT or RUTX devices (one as Server and other as Client)
- A PC acting as a Host for testing
- Both routers must have a Public Static or Public Dynamic IP addresses
Configuration Scheme
I will paste a Topology Image here
DHCP Server Settings
DHCP Pool
Enter the router's WebUI, go to Network > Interfaces > Ethernet LAN and click the 'Edit' button on the right side of the interface to modify the DHCP Pool.
