RUT300 Ports

From Teltonika Networks Wiki
Revision as of 08:25, 17 October 2023 by Vainius.l (talk | contribs) (Created page with "{{Template: Networking_rutos_manual_ports <!---------DEVICE DETAILS---------> | name = RUT300 | series = RUT30X <!-----------SEPARATORS-----------> | portsnumber = 5 <!--pre...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > EOL Products > RUT300 > RUT300 Manual > RUT300 WebUI > RUT300 Network section > RUT300 Ports

The information in this page is updated in accordance with firmware version RUT30X_R_00.07.11.1.


Summary

The Ports page provides information related to the status of the device's physical ports, as well as the ability to edit port settings.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.


Port Mirroring

Port Mirroring (may also be referred to as SPAN (Switched Port Analyzer)) is a service that relays a copy of all network packets - incoming and outgoing on one Ethernet port (Source Port) to another (Monitoring Port).


Field Value Description
Monitoring port Disabled | LAN1 | LAN2 | LAN3 | LAN4; default: Disabled The port which will mirror the packets.
Source port Disabled | LAN1 | LAN2 | LAN3 | LAN4; default: none Port whose packets will be mirrored.
Enable mirroring of incoming packets off | on; default: off
Enable mirroring of outgoing packets off | on; default: off