Disable LAN Ports
From Teltonika Networks Wiki
Revision as of 09:17, 9 June 2020 by Dziugas (talk | contribs) (Created page with "You can disable specific LAN ports by using the VLAN feature. Login to your device's WebUI and navigate to the <b>Network -> VLAN</b> page. From there, you can select which L...")
Main Page > FAQ > Control & Configuration > Disable LAN Ports
You can disable specific LAN ports by using the VLAN feature.
Login to your device's WebUI and navigate to the Network -> VLAN page. From there, you can select which LAN ports should be active and which should not.
RUT Routers
RUTX Routers
Important note: if you disable all LAN ports on the router, you will lose access to the router via Ethernet. To regain access to the router you can:
- login to the router's wireless access point (AP) (provided that you assigned a wireless access point to the VLAN configuration)
- login remotely via RMS
- login remotely via the router's public IP address (provided remote access was configured prior to VLAN)
- login remotely via VPN (provided the VPN was configured prior to VLAN)
- reset the router's configuration to its default state