Difference between revisions of "Disable LAN Ports"

From Teltonika Networks Wiki
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
<p style="color:red">The information in this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.06.3'''] firmware version.</p>  
 
<p style="color:red">The information in this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.06.3'''] firmware version.</p>  
  
−
Disabling LAN ports may vary depending on the device. On some, you can disable ports through LAN interface settings, while on others, you need to use Port-based VLAN. Additionally, some devices may require disabling through Port settings.
+
Disabling LAN ports can differ slightly across various devices. For some devices, certain ports cannot be disabled, while for others, they need to be disabled using Port-based VLAN, and some require configuration through Port settings.
−
 
+
----
−
==Disabling ports using LAN interface settings==
+
==Non-Disableable LAN Port Devices:==
−
 
 
−
Navigate to "Network" -> "LAN" and click on "Edit" for the existing LAN interface.
 
−
[[File:Networking faq disable lan ports interface 1 v3.png|border|class=tlt-border]]
 
−
 
 
−
In the new popup window, go to "Physical Settings" and remove all interfaces from the "Interface" section.
 
−
[[File:Networking faq disable lan ports interface 2 v1.png|border|class=tlt-border]]
 
  
−
<span style="font-weight: bold;">These instructions are for the following devices:</span>
 
  
 
<ul>
 
<ul>
Line 24: Line 17:
 
     <li style="margin-bottom: 5px;">[[RUT360|RUT360]]</li>
 
     <li style="margin-bottom: 5px;">[[RUT360|RUT360]]</li>
 
</ul>
 
</ul>
−
 
+
----
−
==Disabling ports using Port-based VLANs==
+
==Devices disableable using Port-based VLAN settings==
−
 
 
−
Go to '''Network -> VLAN -> Port based'''. Choose the desired ports and select the "Off" option. Press "Save & Apply".
 
−
[[File:Networking rut faq disable lan ports v2.png|border|class=tlt-border]]
 
−
 
 
−
<span style="font-weight: bold;">These instructions are for the following devices:</span>
 
  
 
<ul>
 
<ul>
Line 38: Line 26:
 
</ul>
 
</ul>
  
−
==Disabling ports using Ports settings==
+
Go to '''Network -> VLAN -> Port based'''. Choose the desired ports and select the "Off" option. Press "Save & Apply".
−
 
+
[[File:Networking rut faq disable lan ports v2.png|border|class=tlt-border]]
−
Navigate to '''Network -> Ports -> Ports Settings'''. Select the desired ports and click on "Edit ports."
+
----
−
[[File:Networking rutx faq disable lan ports 1 v2.png|border|class=tlt-border]]
+
==Devices disableable through port settings==
−
 
 
−
In the new window, disable the ports by turning the "Enable" slider off. Finally, press "Save & Apply".
 
−
[[File:Networking rutx faq disable lan ports 2 v2.png|border|class=tlt-border]]
 
−
 
 
−
<span style="font-weight: bold;">These instructions are for the following devices:</span>
 
  
 
<ul>
 
<ul>
Line 69: Line 52:
 
</ul>
 
</ul>
  
 +
Navigate to '''Network -> Ports -> Ports Settings'''. Select the desired ports and click on "Edit ports."
 +
[[File:Networking rutx faq disable lan ports 1 v2.png|border|class=tlt-border]]
  
 +
In the new window, disable the ports by turning the "Enable" slider off. Finally, press "Save & Apply".
 +
[[File:Networking rutx faq disable lan ports 2 v2.png|border|class=tlt-border]]
 
----
 
----
  
−
<u>'''Important note''': if you disable all LAN ports on the router, you will lose access to the router via Ethernet. To regain access to the router you can:</u>
+
'''Important note''': if you disable all LAN ports on the router, you will lose access to the router via Ethernet. To regain access to the router you can:
  
 
*login to the router's wireless access point (AP) (provided that you assigned a wireless access point to the VLAN configuration)
 
*login to the router's wireless access point (AP) (provided that you assigned a wireless access point to the VLAN configuration)

Revision as of 11:10, 7 February 2024

Main Page > FAQ > Control & Configuration > Disable LAN Ports

The information in this page is updated in accordance with 00.07.06.3 firmware version.

Disabling LAN ports can differ slightly across various devices. For some devices, certain ports cannot be disabled, while for others, they need to be disabled using Port-based VLAN, and some require configuration through Port settings.

Non-Disableable LAN Port Devices:

Devices disableable using Port-based VLAN settings

Go to Network -> VLAN -> Port based. Choose the desired ports and select the "Off" option. Press "Save & Apply". Networking rut faq disable lan ports v2.png

Devices disableable through port settings

Navigate to Network -> Ports -> Ports Settings. Select the desired ports and click on "Edit ports." Networking rutx faq disable lan ports 1 v2.png

In the new window, disable the ports by turning the "Enable" slider off. Finally, press "Save & Apply". Networking rutx faq disable lan ports 2 v2.png

Important note: if you disable all LAN ports on the router, you will lose access to the router via Ethernet. To regain access to the router you can:

  • login to the router's wireless access point (AP) (provided that you assigned a wireless access point to the VLAN configuration)
  • login remotely via RMS
  • login remotely via the router's public IP address (provided remote access was configured prior to VLAN)
  • login remotely via VPN (provided the VPN was configured prior to VLAN)
  • reset the router's configuration to its default state
Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Disable_LAN_Ports&oldid=120209"