Difference between revisions of "Disable LAN Ports"

From Teltonika Networks Wiki
 
(7 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
You can disable specific LAN ports by using the VLAN feature.
+
<p style="color:red">The information in this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.06.3'''] firmware version.</p>
  
−
Login to your device's WebUI and navigate to the <b>Network -> VLAN</b> page. From there, you can select which LAN ports should be active and which should not.
+
Disabling LAN ports may vary depending on the device. On some, you can disable ports through LAN interface settings, while on others, you need to use Port-based VLAN. Additionally, some devices may require disabling through Port settings.
−
----
+
 
−
<b>RUT Routers</b>
+
==Disabling ports using LAN interface settings==
 +
 
 +
Navigate to "Network" -> "LAN" and click on "Edit" for the existing LAN interface.
 +
[[File:Networking faq disable lan ports interface 1 v3.png|border|class=tlt-border]]
 +
 
 +
In the new popup window, go to "Physical Settings" and remove all interfaces from the "Interface" section.
 +
[[File:Networking faq disable lan ports interface 2 v1.png|border|class=tlt-border]]
 +
 
 +
<span style="font-weight: bold;">These instructions are for the following devices:</span>
 +
 
 +
<ul>
 +
    <li style="margin-bottom: 5px;">[[RUT240|RUT240]]</li>
 +
    <li style="margin-bottom: 5px;">[[TRB141|TRB141]]</li>
 +
    <li style="margin-bottom: 5px;">[[TRB142|TRB142]]</li>
 +
    <li style="margin-bottom: 5px;">[[TRB145|TRB145]]</li>
 +
    <li style="margin-bottom: 5px;">[[TRB245|TRB245]]</li>
 +
    <li style="margin-bottom: 5px;">[[TRB246|TRB246]]</li>
 +
    <li style="margin-bottom: 5px;">[[TRB255|TRB255]]</li>
 +
    <li style="margin-bottom: 5px;">[[TRB256|TRB256]]</li>
 +
    <li style="margin-bottom: 5px;">[[RUT360|RUT360]]</li>
 +
</ul>
 +
 
 +
==Disabling ports using Port-based VLANs==
 +
 
 +
Go to '''Network -> VLAN -> Port based'''. Choose the desired ports and select the "Off" option. Press "Save & Apply".
 +
[[File:Networking rut faq disable lan ports v2.png|border|class=tlt-border]]
 +
 
 +
<span style="font-weight: bold;">These instructions are for the following devices:</span>
 +
 
 +
<ul>
 +
    <li style="margin-bottom: 5px;">[[RUT950|RUT950]]</li>
 +
    <li style="margin-bottom: 5px;">[[RUT955|RUT955]]</li>
 +
    <li style="margin-bottom: 5px;">[[RUT300|RUT300]]</li>
 +
</ul>
 +
 
 +
==Disabling ports using Ports settings==
 +
 
 +
Navigate to '''Network -> Ports -> Ports Settings'''. Select the desired ports and click on "Edit ports."
 +
[[File:Networking rutx faq disable lan ports 1 v2.png|border|class=tlt-border]]
 +
 
 +
In the new window, disable the ports by turning the "Enable" slider off. Finally, press "Save & Apply".
 +
[[File:Networking rutx faq disable lan ports 2 v2.png|border|class=tlt-border]]
 +
 
 +
<span style="font-weight: bold;">These instructions are for the following devices:</span>
 +
 
 +
<ul>
 +
    <li style="margin-bottom: 5px;">[[RUT200|RUT200]]</li>
 +
    <li style="margin-bottom: 5px;">[[RUT241|RUT241]]</li>
 +
    <li style="margin-bottom: 5px;">[[RUT901|RUT901]]</li>
 +
    <li style="margin-bottom: 5px;">[[RUT906|RUT906]]</li>
 +
    <li style="margin-bottom: 5px;">[[RUT951|RUT951]]</li>
 +
    <li style="margin-bottom: 5px;">[[RUT956|RUT956]]</li>
 +
    <li style="margin-bottom: 5px;">[[TRB140|TRB140]]</li>
 +
    <li style="margin-bottom: 5px;">[[TRB143|TRB143]]</li>
 +
    <li style="margin-bottom: 5px;">[[TRB500|TRB500]]</li>
 +
    <li style="margin-bottom: 5px;">[[RUTX08|RUTX08]]</li>
 +
    <li style="margin-bottom: 5px;">[[RUTX09|RUTX09]]</li>
 +
    <li style="margin-bottom: 5px;">[[RUTX10|RUTX10]]</li>
 +
    <li style="margin-bottom: 5px;">[[RUTX11|RUTX11]]</li>
 +
    <li style="margin-bottom: 5px;">[[RUTX12|RUTX12]]</li>
 +
    <li style="margin-bottom: 5px;">[[RUTX14|RUTX14]]</li>
 +
    <li style="margin-bottom: 5px;">[[RUTX50|RUTX50]]</li>
 +
    <li style="margin-bottom: 5px;">[[RUTXR1|RUTXR1]]</li>
 +
    <li style="margin-bottom: 5px;">[[RUTM50|RUTM50]]</li>
 +
</ul>
  
−
[[File:Networking_rut_faq_disable_lan_ports_v1.png|border|class=tlt-border]]
 
−
----
 
−
<b>RUTX Routers</b>
 
  
−
[[File:Networking_rutx_faq_disable_lan_ports_v1.png|border|class=tlt-border]]
 
 
----
 
----
  
−
'''Important note''': if you disable all LAN ports on the router, you will lose access to the router via Ethernet. To regain access to the router you can:
+
<u>'''Important note''': if you disable all LAN ports on the router, you will lose access to the router via Ethernet. To regain access to the router you can:</u>
  
 
*login to the router's wireless access point (AP) (provided that you assigned a wireless access point to the VLAN configuration)
 
*login to the router's wireless access point (AP) (provided that you assigned a wireless access point to the VLAN configuration)

Latest revision as of 13:14, 7 February 2024

Main Page > FAQ > Control & Configuration > Disable LAN Ports

The information in this page is updated in accordance with 00.07.06.3 firmware version.

Disabling LAN ports may vary depending on the device. On some, you can disable ports through LAN interface settings, while on others, you need to use Port-based VLAN. Additionally, some devices may require disabling through Port settings.

Disabling ports using LAN interface settings

Navigate to "Network" -> "LAN" and click on "Edit" for the existing LAN interface. Networking faq disable lan ports interface 1 v3.png

In the new popup window, go to "Physical Settings" and remove all interfaces from the "Interface" section. Networking faq disable lan ports interface 2 v1.png

These instructions are for the following devices:

Disabling ports using Port-based VLANs

Go to Network -> VLAN -> Port based. Choose the desired ports and select the "Off" option. Press "Save & Apply". Networking rut faq disable lan ports v2.png

These instructions are for the following devices:

Disabling ports using Ports settings

Navigate to Network -> Ports -> Ports Settings. Select the desired ports and click on "Edit ports." Networking rutx faq disable lan ports 1 v2.png

In the new window, disable the ports by turning the "Enable" slider off. Finally, press "Save & Apply". Networking rutx faq disable lan ports 2 v2.png

These instructions are for the following devices:


Important note: if you disable all LAN ports on the router, you will lose access to the router via Ethernet. To regain access to the router you can:

  • login to the router's wireless access point (AP) (provided that you assigned a wireless access point to the VLAN configuration)
  • login remotely via RMS
  • login remotely via the router's public IP address (provided remote access was configured prior to VLAN)
  • login remotely via VPN (provided the VPN was configured prior to VLAN)
  • reset the router's configuration to its default state
Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Disable_LAN_Ports&oldid=120223"