Search results

...ublic Dynamic IP address (more on IP address types '''[[Private and Public IP Addresses|here]]''') to make remote access possible * (Optional) If the router's SIM card has a Public Dynamic IP address, you may want to additionally configure a '''[[Dynamic DNS]]''' hos

...ublic Dynamic IP address (more on IP address types '''[[Private and Public IP Addresses|here]]''') to make remote access possible * (Optional) If the router's SIM card has a Public Dynamic IP address, you may want to additionally configure a '''[[Dynamic DNS]]''' hos

<th>Description</th> <td>AP IP</td>

...ith the possibility to set the router's Private IP address, IP netmask and IP broadcast. <th>Description</th>

...ith the possibility to set the router's Private IP address, IP netmask and IP broadcast. <th>Description</th>

...ith the possibility to set the router's Private IP address, IP netmask and IP broadcast. <th>description</th>

...ith the possibility to set the router's Private IP address, IP netmask and IP broadcast. <th>description</th>

...ith the possibility to set the router's Private IP address, IP netmask and IP broadcast. <th>Description</th>

...simulates a network layer device and it operates with layer 3 packets like IP packets. TUN is used for routing and connecting '''multiple''' clients to a ...Public static) IP: '''213.226.191.61''') and '''RUT2''' ('''Client'''; LAN IP: '''192.168.2.1'''); that will be connected into virtual network (with the

...ith the possibility to set the router's Private IP address, IP netmask and IP broadcast. <th>description</th>

<th>description</th> <th>description</th>

<th>description</th> <th>description</th>

<th>description</th> <th>description</th>

<th>description</th> <th>description</th>

<th>description</th> <th>description</th>

<th>description</th> <th>description</th>

...article regarding this can be found on our wiki FAQ: [[Private and Public IP Addresses]]. ...s configuration has been reset, then the device will <u>always</u> have an IP address of 192.168.1.1.''

...article regarding this can be found on our wiki FAQ: [[Private and Public IP Addresses]]. ...s configuration has been reset, then the device will <u>always</u> have an IP address of 192.168.1.1.''

...simulates a network layer device and it operates with layer 3 packets like IP packets. TUN is used for routing and connecting '''multiple''' clients to a ...Public static) IP: '''193.186.223.42''') and '''RUT2''' ('''Client'''; LAN IP: '''192.168.2.1'''); that will be connected into virtual network (with the

The Operation Modes tab also displays each interfaces name, WAN IP address and Protocol in use. To configure a WAN interface more in depth, cl <th>description</th>

==2023.05.18 New mandatory connection IP addresses and ports== ! colspan="3" style="text-align: left; background: white;" |Change description

<th>description</th> <td>ip; Default: '''0.0.0.0'''</td>

...2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |DESCRIPTION ...lign: top; background: white;" |string; Default: '''Router name - %rn; WAN IP - %wi; Data Connection state - %cs; Connection type - %ct; Signal strength

...2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION ...ign: top; background: white;" | string; Default: '''Router name - %rn; WAN IP - %wi; Data Connection state - %cs; Connection type - %ct; Signal strength

...2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |DESCRIPTION ...lign: top; background: white;" |string; Default: '''Router name - %rn; WAN IP - %wi; Data Connection state - %cs; Connection type - %ct; Signal strength

! style="width: 1200px; background: black; color: white;" |Description | style="text-align: left; vertical-align: top;" |To see IP routing tables.

...2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION ...ign: top; background: white;" | string; Default: '''Router name - %rn; WAN IP - %wi; Data Connection state - %cs; Connection type - %ct; Signal strength

...2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION Data state, Operator, Connection type, Signal Strength, Connection State, IP

*One RUTOS device will need to have a '''Public IP''' address ...l be similar for all RUTOS devices. The difference will be in the assigned IP address. To set up the general configuration, follow these steps:

...raphic security services to protect communications over Internet Protocol (IP) networks. IPsec supports network-level peer authentication, data-origin au * At least one router must have a Public Static or Public Dynamic IP address

...o router</li><li>HUB has to be reachable from spokes (HUB must have Public IP address, or has to be in the same WAN network as Spokes) ...you need. Remember that other Spokes will have different LAN, WAN and GRE IP addresses.

...ve '''192.168.1.2''' internal IP address. This can be done by changing the IP address parameter in '''Network->LAN''' page: ...cess' if we wish to access this router from external WAN using it's public IP). This is done in '''Services->Modbus''' page:

<th>Description</th> <td>The router's hostname. This can be used instead of the IP address to reach the router's WebUI from the local network.</td>

...o have a 192.168.1.2 internal IP address. This can be done by changing the IP address parameter on Network → WAN page: ...ccess' if we wish to access this router from external WAN using its public IP). This is done on Services → Modbus page:

<li>Optionally, set up a name and description for your network for easier management.</li> ...selection which means our network will be using the <b>10.147.17.0/24</b> IP range.<br>[[File:Zerotier_configuration_4.png|border|class=tlt-border]]</li

! style="width: 950px; background: black; color: white;" |Description ! style="width: 950px; background: black; color: white;" |Description

*'''SENDING DATA OVER TCP/IP''' *'''SENDING DATA OVER UDP/IP'''

<th>Description</th> ...<td>The Virtual Router Identifier (VRID) is a field in the VRRP packet IP header used to identify the virtual router in the VRRP cluster. Routers wit

* Both routers must have a Public Static or Public Dynamic IP addresses #Enter '''Remote endpoint IP address''' (Cisco WAN IP).

* Both routers must have a Public Static or Public Dynamic IP addresses #Enter '''Remote endpoint IP address''' (Cisco WAN IP).

For this example, we will add the following lines in order to accept any IP address as a client: '''Note:''' a specific public IP of the client can be used instead of 0.0.0.0/0

<th>description</th> <td>ip; Default: '''0.0.0.0'''</td>

! style="width: 1200px; background: black; color: white;" | Description ! style="width: 340px; background: black; color: white;" | Description

...22) publish-subscribe-based messaging protocol. It works on top of the TCP/IP protocol. It is designed for connections with remote locations where a "sma ! style="width: 400px; background: black; color: white;" | Parameter description

...X Day, RX Week ,RX Month, TX Day, TX Week, TX Month, ICCID, WAN State, WAN IP, Temperature. ...''' - updates these parameters: Hotspot ID, Hotspot SSID, Hotspot Enabled, IP, Download, Upload, Download Limit, Upload Limit, Hotspot Users, Hotspot Use

...ing MOB1S1A1 or MOB2S1A1 (Status = Running). You should be able to see the IP address assigned to it. In addition, it is recommended to perform connectiv * Input the '''IP address''' of the host in the source IP address field.

| style="text-align: center; width: 270px; background: white;" | Description ==Sending data over TCP/IP==

...nt of customer-premises equipment (CPE) connected to an Internet Protocol (IP) network. This section is a summary of '''TR-069''' in RUT routers. <th>description</th>

==Description== * WAN IP

==Description== WAN Type and IP

{{ip description}} ...o rut 950 declaration of rut950 ip rate.png|thumb|left|300px|x300px|RUT950 IP rate]]

{{ip description}} ...o rut 955 declaration of rut955 ip rate.png|thumb|left|300px|x300px|RUT955 IP rate]]

...Teltonika device, internet provider will need to provide sim card's public IP address, right? ...and only need to have an internet connection to connect to RMS. No public IP is needed.

=Hardware Description= '''"IP address"''' : The LAN IP address of the router, by default its 192.168.1.1

<th>description</th> <th>description</th>

A '''Netmask''' is a 32-bit "mask" used to divide an IP address into subnets and specify the network's available hosts. In a netmas ...how "large" a network is or if you're configuring a rule that requires an IP address and a Netmask, the Netmask will signify to what range of the Networ

----This page contains links with description all WebUI windows. If you're having trouble seeing all the pages listed her 1. You must have a DNS record linked to the IP of the router; in my case, I’m using a Windows server to act as a DNS ser

=Hardware Description= '''"IP address"''' : The LAN IP address of the router, by default its 192.168.1.1

* Enter the name of the Hub, optionally set the description and tags. *Select the end device‘s IP address (in this example 192.168.1.211) and press add.

...t is usually a good idea to <b><u>include a Troubleshoot file along with a description of the issue.</u></b> Doing this can speed up the support process significa <li>[[Private and Public IP Addresses]]</li>