[[File:Networking rutx manual webui basic advanced mode.gif | border]]
...re is detected, the cellular gateway or router automatically establishes a network connection and begins routing traffic through it. This ensures that there i
11 KB (1,605 words) - 09:05, 15 November 2023
...t can be used to bridge WAN and LAN interfaces to create a larger Wireless network.
...asic" button under "Mode", which is located at the top-right corner of the WebUI.
10 KB (1,568 words) - 15:17, 3 October 2023
[[File:Networking rutx manual webui basic advanced mode.gif | border]]
...that adds TLS encryption to clients and Servers already existing on a VPN network. TLS encryption provided by Stunnel can be used as an additional layer of e
8 KB (1,159 words) - 10:59, 22 December 2022
...re basic explanations on the OpenVPN WebUI section, visit our '''[[VPN|VPN manual page]]'''.
**TUN (tunnel) - simulates a network layer device and it operates with layer 3 packets like IP packets. TUN is used for routi
23 KB (3,572 words) - 14:53, 2 August 2023
For this manual we will assume you are working with Linux Ubuntu 18.04.1 on your virtual ma
[[File:Networking RUTX configuration example connecting to openvpn access server openVPN conf
12 KB (1,803 words) - 14:56, 2 August 2023
Because of the lack of confidentiality inherent in the '''Layer 2 Networking Protocol''' ('''L2TP''') protocol, '''Internet Protocol Security''' ('''IPs
* At least one end device (PC, Laptop, Tablet, Smartphone) to configure the routers
14 KB (2,185 words) - 15:08, 2 August 2023
...crease the speed of multiple connections. For example, when used in a WiFi network, Load Balancing would utilize the resources of multiple WAN interfaces to h
...asic" button under "Mode", which is located at the top-right corner of the WebUI.
9 KB (1,529 words) - 17:02, 3 August 2023
...ccess point. The network management and control will be handled by the RUT device, with the TAP100 extending the coverage area.
...e "'''Advanced'''" button, which is located at the top-right corner of the WebUI.
11 KB (1,682 words) - 09:23, 7 November 2023
Connect to the TRB141 CLI via SSH or WebUI.
# Read temperature data from device file and filter it to display up to 2 decimal points
10 KB (1,592 words) - 08:21, 23 August 2023
To find specific information related to your device, follow a path such as this from the Wiki's home page:<br>
<font size="-1"><i>Main Page → Device series → Device name → Information...</i></font><br>
22 KB (2,825 words) - 14:58, 28 March 2024
...bUI and navigate to the Network section found the Wireless tab by side ('''Network → Wireless'''):
[[File:Networking rutos manual wireless configuration tab v2.png|border|1140x1140px|alt=]]
2 KB (315 words) - 14:29, 3 August 2023
Then - '''New Network''' and you will be prompted to create a new network.
Enter your desired network name can click '''Create'''.
5 KB (723 words) - 14:49, 27 March 2023
The simplest way to access the device remotely is via its [[Private_and_Public_IP_Addresses#Public_IP_address|pub
...addresses that are classified as private and cannot be utilized for remote device access via their public IP:
4 KB (636 words) - 16:08, 28 February 2024
[[File:Networking rutos manual webui basic advanced mode 75.gif|none|border|center|class=tlt-border]]
...penVPN server tunnel address - 10.0.0.1, OpenVPN subnet - 10.0.0.0/27, LAN device address - 192.168.5.114</li>
9 KB (1,343 words) - 14:55, 9 April 2024
...servers to the internet, while preserving private communication in the LAN network.
...asic" button under "Mode", which is located at the top-right corner of the WebUI.
4 KB (711 words) - 17:42, 15 June 2022
...er protocols inside virtual point-to-point links over an Internet Protocol network.
* At least one end device (PC, Laptop, Tablet, Smartphone) to configure the routers
5 KB (786 words) - 09:54, 26 May 2022
[[File:Networking rutx manual webui basic advanced mode v1.gif|border|class=tlt-border]]
* An end device for test the configuration.<br>
4 KB (615 words) - 14:49, 2 August 2023
===Network details===
...'''under''' '''"Mode,"''' which is located at the top-right corner of the WebUI.
5 KB (735 words) - 14:19, 27 March 2023
...usage by applications (such as [https://www.putty.org/ Putty]) as a native device of the computer.
...asic" button under "Mode", which is located at the top-right corner of the WebUI.
6 KB (926 words) - 15:56, 3 August 2023
[[File:Networking rutx manual webui basic advanced mode v1.gif|border|class=tlt-border]]
* 2 PCs in the same LAN network
4 KB (679 words) - 17:34, 26 November 2021
