...Internet. VPNs can serve to achieve many different goals, but some of its main purposes are:
...side (client and server) of the connection. If one side uses <i>0</i>, the other side should use <i>1</i>, or both sides should omit the parameter altogethe
108 KB (15,975 words) - 08:48, 23 April 2024
...Internet. VPNs can serve to achieve many different goals, but some of its main purposes are:
...side (client and server) of the connection. If one side uses <i>0</i>, the other side should use <i>1</i>, or both sides should omit the parameter altogethe
106 KB (15,615 words) - 15:57, 8 April 2024
...MS user interface. This page aims to familiarize first-time users with the main aspects of the RMS interface.
===Main elements===
6 KB (877 words) - 11:54, 26 January 2021
-
129 bytes (9 words) - 13:11, 12 May 2020
-
129 bytes (9 words) - 13:10, 12 May 2020
-
129 bytes (9 words) - 13:10, 12 May 2020
-
129 bytes (9 words) - 13:10, 12 May 2020
-
129 bytes (9 words) - 13:12, 12 May 2020
<font size="-1"><i>Main Page → Device series → Device name → Information...</i></font><br>
<font size="-1"><i>[[Main Page]] → [[RUT Routers]] → [[RUT955]] → [[RUT955 Manual]]</i></font><
23 KB (3,097 words) - 14:05, 21 May 2024
...Internet. VPNs can serve to achieve many different goals, but some of its main purposes are:
...side (client and server) of the connection. If one side uses <i>0</i>, the other side should use <i>1</i>, or both sides should omit the parameter altogethe
36 KB (5,401 words) - 13:09, 7 May 2020
The <b>Mobile Configuration</b> section is used to configure main SIM card parameters. Refer to the figure and table below for information on
...quire you to use an APN just to complete the registration on a network. In other cases, APN is used to get special parameters from the operator (e.g., a [[P
38 KB (6,061 words) - 12:24, 24 October 2023
The <b>Mobile Configuration</b> section is used to configure main SIM card parameters. Refer to the figure and table below for information on
...quire you to use an APN just to complete the registration on a network. In other cases, APN is used to get special parameters from the operator (e.g., a [[P
38 KB (6,097 words) - 12:25, 24 October 2023
...s in order to make sure LAN devices on each end would be available in case Main links fail.
...ill use 3 wired links for the simplicity of testing. However, there can be other variations, such as 1 Wired link and 2 Mobile links.
4 KB (635 words) - 17:28, 3 August 2023
The <b>Mobile Configuration</b> section is used to configure main SIM card parameters. Refer to the figure and table below for information on
...quire you to use an APN just to complete the registration on a network. In other cases, APN is used to get special parameters from the operator (e.g., a [[P
30 KB (4,910 words) - 15:46, 25 August 2020
The <b>IPsec configuration</b> section is used to configure the main parameters of an IPsec connection. Refer to the figure and table below for
...T support, supported multihosting, deprecated exchange modes (does not use main or aggressive mode; only 4 messages required to establish a connection)</li
14 KB (1,976 words) - 08:48, 19 August 2021
The <b>IPsec configuration</b> section is used to configure the main parameters of an IPsec connection. Refer to the figure and table below for
...T support, supported multihosting, deprecated exchange modes (does not use main or aggressive mode; only 4 messages required to establish a connection).</l
14 KB (1,934 words) - 10:54, 17 September 2020
...annels. You can download a free WiFi analyzer app on your phone, laptop or other WiFi device and check which channel is the least populated.
...channel helps minimize these slowdowns. Therefore, pick a channel with no other active Access Points and preferably one that has no active Access Point on
49 KB (7,038 words) - 15:30, 8 April 2024
...annels. You can download a free WiFi analyzer app on your phone, laptop or other WiFi device and check which channel is the least populated.
...channel helps minimize these slowdowns. Therefore, pick a channel with no other active Access Points and preferably one that has no active Access Point on
53 KB (7,650 words) - 14:09, 9 May 2024
* Two RUT or RUTX devices (one as Server and other as Client)
===Set up Mobile WAN as Main WAN===
4 KB (680 words) - 15:09, 2 August 2023
The <b>BGP Instance</b> section is used to configure some of the main operating parameters of the BGP protocol. Below is an example of the BGP In
...are routers in the same BGP Peer Group that can redistribute routes among other BGP Peers. Below is an example of the BGP Peers section, which is empty by
56 KB (8,364 words) - 15:43, 8 April 2024
...After unexpected shut down''' sub-type. This section is an overview of all other Event type and sub-types.
...figuration are applied. For example, whenever a switch from using Wired as main WAN to backup WAN occurs, Wireless is added as a Backup WAN, Health monitor
66 KB (9,365 words) - 10:37, 10 December 2020
...After unexpected shut down''' sub-type. This section is an overview of all other Event type and sub-types.
...figuration are applied. For example, whenever a switch from using Wired as main WAN to backup WAN occurs, Wireless is added as a Backup WAN, Health monitor
67 KB (9,677 words) - 16:05, 5 July 2021
...After unexpected shut down''' sub-type. This section is an overview of all other Event type and sub-types.
...figuration are applied. For example, whenever a switch from using Wired as main WAN to backup WAN occurs, Wireless is added as a Backup WAN, Health monitor
67 KB (9,689 words) - 12:24, 24 October 2023
...After unexpected shut down''' sub-type. This section is an overview of all other Event type and sub-types.
...figuration are applied. For example, whenever a switch from using Wired as main WAN to backup WAN occurs, Wireless is added as a Backup WAN, Health monitor
76 KB (10,825 words) - 10:54, 19 July 2021
...After unexpected shut down''' sub-type. This section is an overview of all other Event type and sub-types.
...figuration are applied. For example, whenever a switch from using Wired as main WAN to backup WAN occurs, Wireless is added as a Backup WAN, Health monitor
76 KB (10,932 words) - 12:37, 24 October 2023
...After unexpected shut down''' sub-type. This section is an overview of all other Event type and sub-types.
...figuration are applied. For example, whenever a switch from using Wired as main WAN to backup WAN occurs, Wireless is added as a Backup WAN, Health monitor
77 KB (11,152 words) - 12:38, 24 October 2023
...mation on <b>network interface configuration</b>. There are {{{no_of_if}}} main types of interfaces on the device:
...s that go along with each protocol. If <b>None</b> protocol is chosen, all other interface settings will be ignored. The following sections are different fo
53 KB (7,859 words) - 12:08, 24 October 2023
...are routers in the same BGP Peer Group that can redistribute routes among other BGP Peers. Below is an example of the BGP Peers section, which is empty by
...that use the BGP protocol to dynamically redistribute routes among peers (other routers). The figure below is an example of the BGP Peer Groups section, wh
54 KB (8,054 words) - 10:40, 17 April 2024
*RUT240 or any other Teltonika Networks router running legacy firmware
...Fi''' it’s possible to change the name of WiFi along with a passphrase or other operation settings. After the changes have been made, proceed to the next s
28 KB (4,403 words) - 16:44, 8 February 2022
...Internet. VPNs can serve to achieve many different goals, but some of its main purposes are:
...side (client and server) of the connection. If one side uses <i>0</i>, the other side should use <i>1</i>, or both sides should omit the parameter altogethe
39 KB (5,911 words) - 12:09, 24 October 2023
...Internet. VPNs can serve to achieve many different goals, but some of its main purposes are:
...side (client and server) of the connection. If one side uses <i>0</i>, the other side should use <i>1</i>, or both sides should omit the parameter altogethe
40 KB (5,947 words) - 12:25, 24 October 2023
...WAN – Mobile and Wi-Fi. You can also setup backup WAN options in case your main connection goes down.
...from the left). Above is an example of a configuration that uses mobile as Main WAN and Wi-Fi as Backup WAN.
13 KB (2,042 words) - 11:38, 7 May 2020
...<li><b>Hub</b> - the central instance of DMVPN that connects other peers (spokes) into single network. There is no need to reconfigure the hub
<td>Main | Aggressive; default: <b>Main</b></td>
7 KB (1,013 words) - 15:43, 8 July 2019
* Main gateway with WAN access (Any RUTOS router. RUTXR1 is used in this example)
...s WebUI, navigate to the '''Network → Interfaces → Edit LAN''' page. Enter main gateway's IP address and save. We will leave it default (192.168.1.1) for t
4 KB (662 words) - 14:50, 2 August 2023
The <b>Mobile Configuration</b> section is used to configure main SIM card parameters. Refer to the figure and table below for information on
...re you to enter the APN just to complete the registration to a network. In other cases an APN is used to get special parameters from the operator (e.g., a [
20 KB (3,283 words) - 08:44, 9 June 2020
** Removed enable option from AVL main rule
** Added hints in "Multiple Access Points" page and a redirect to main wireless page after saving
51 KB (7,357 words) - 10:34, 24 May 2023
...ber of other channels. Choosing WiFi channels that are far apart from each other may also prove to increase performance when using more than one AP on the d
...th 4 adjacent channels on each side. Therefore, it might overlap with many other Access Points operating at similar frequencies. If that is the case, the ro
16 KB (2,345 words) - 12:25, 24 October 2023
...ber of other channels. Choosing WiFi channels that are far apart from each other may also prove to increase performance when using more than one AP on the d
...th 4 adjacent channels on each side. Therefore, it might overlap with many other Access Points operating at similar frequencies. If that is the case, the ro
16 KB (2,309 words) - 12:30, 24 October 2023
...mation on <b>network interface configuration</b>. There are {{{no_of_if}}} main types of interfaces on the device:
...s that go along with each protocol. If <b>None</b> protocol is chosen, all other interface settings will be ignored. The following sections are different fo
44 KB (6,505 words) - 15:28, 8 April 2024
...mation on <b>network interface configuration</b>. There are {{{no_of_if}}} main types of interfaces on the device:
...s that go along with each protocol. If <b>None</b> protocol is chosen, all other interface settings will be ignored. The following sections are different fo
45 KB (6,587 words) - 16:19, 6 May 2024
...obile, Wired and Wi-Fi. You can also setup backup WAN options in case your main connection goes down.
...from the left). Above is an example of a configuration that uses wired as Main WAN and mobile as Backup WAN.
18 KB (2,776 words) - 13:43, 19 August 2021
...obile, Wired and Wi-Fi. You can also setup backup WAN options in case your main connection goes down.
...from the left). Above is an example of a configuration that uses wired as Main WAN and mobile as Backup WAN.
18 KB (2,792 words) - 10:46, 4 June 2021
...obile, Wired and Wi-Fi. You can also setup backup WAN options in case your main connection goes down.
...from the left). Above is an example of a configuration that uses wired as Main WAN and mobile as Backup WAN.
19 KB (2,838 words) - 12:25, 24 October 2023
...obile, Wired and Wi-Fi. You can also setup backup WAN options in case your main connection goes down.
...from the left). Above is an example of a configuration that uses wired as Main WAN and mobile as Backup WAN.
18 KB (2,821 words) - 12:25, 24 October 2023
...to configure routers, servers, standalone computers, IoT devices and many other appliances using IPv6 address pool. IP version 6 [[https://datatracker.ietf
...al-stack capable equipment, tunneling, 6to4, NAT64, Teredo, 6rd, ISATAP or other supported mechanisms.''
12 KB (1,982 words) - 11:11, 3 January 2022
...ares that this TRB245 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declar
...any people and must not be co-located or operated in conjunction with any other antenna or transmitter.
21 KB (3,068 words) - 14:13, 19 January 2024
...ares that this TRB246 is in compliance with the essential requirements and other relevant provisions of Richtlijnen 2014/53/EU, 2011/65/EU.
...ares that this TRB246 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declar
18 KB (2,492 words) - 13:30, 23 January 2024
...ares that this TRB255 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declar
...any people and must not be co-located or operated in conjunction with any other antenna or transmitter.
21 KB (3,067 words) - 14:39, 19 January 2024
...ares that this TRB256 is in compliance with the essential requirements and other relevant provisions of Richtlijnen 2014/53/EU, 2011/65/EU.
...ares that this TRB256 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declar
19 KB (2,640 words) - 09:47, 16 May 2024
...etwork, where each new SPOKE can join the network with minimal effort. The main benefits of DMVPN would be that it simplifies router configuration, has hig
...reach other spokes networks based on the next-hop tunnel IP address of the other spoke for a particular network.
12 KB (1,779 words) - 14:52, 2 August 2023
...ares that this TRB141 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declar
...any people and must not be co-located or operated in conjunction with any other antenna or transmitter.
19 KB (2,668 words) - 12:04, 12 December 2023
...ares that this TRB142 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declar
...any people and must not be co-located or operated in conjunction with any other antenna or transmitter.
19 KB (2,670 words) - 09:44, 13 December 2023
...ares that this TRB145 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declar
...any people and must not be co-located or operated in conjunction with any other antenna or transmitter.
19 KB (2,670 words) - 14:07, 13 December 2023
*** DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
*** Added formula for analog signal value conversion to other unit value
109 KB (15,740 words) - 09:50, 6 May 2024
*** DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
*** Added formula for analog signal value conversion to other unit value
110 KB (15,763 words) - 09:51, 6 May 2024
...''I/O Juggler''' on '''Teltonika Networks''' Routers and Gateways when the main power supply is being cut and the device switches onto the Backup Power fro
'''1.'''Power is being cut from the '''main Power Supply''' for '''BAT120'''<br>
6 KB (930 words) - 11:38, 27 March 2023
* Main gateway with WAN access (Any RUTOS router. RUTXR1 is used in this example).
...o the router's WebUI, navigate to the Network → LAN → Edit LAN page. Enter main gateway's IP address and save. We will leave it default (192.168.1.1) for t
4 KB (590 words) - 16:02, 28 February 2024
...ocol) network. In order to successfully communicate on the Internet or any other computer network, a machine must have a network interface and an IP address
...stant remote access to a device. Since the IP address never changes you or other users need to remember only one IP address to reach the device at any given
7 KB (1,254 words) - 08:40, 9 November 2021
...al to know when configuring traffic rules. It not only answers some of the main questions that users may have, but also provides information that can make
...are specific to particular services. In addition to these ports, there are other well-known ports that fall outside of this range.
23 KB (3,921 words) - 05:36, 15 May 2023
...arger amount of flash space, which surpasses the capacity available on our other devices.</p>
...device you intend to use, whether it's a PC, laptop, mobile phone, or any other device. Then, click the "Add device" button.[[File:Networking tailscale con
7 KB (1,085 words) - 17:19, 8 February 2024
...atency, or increase usable bandwidth for some kinds of packets by delaying other kinds.
...nd fq_codel as leaf qdisc. It just does not come any simpler than this, in other words it truly is a "piece of cake".</li>
14 KB (2,035 words) - 10:00, 9 April 2024
...atency, or increase usable bandwidth for some kinds of packets by delaying other kinds.
...nd fq_codel as leaf qdisc. It just does not come any simpler than this, in other words it truly is a "piece of cake".</li>
15 KB (2,100 words) - 15:10, 24 April 2024
...relay and dynamically redirect incoming connections to a target host. Its main purpose in RUTxxx routers is to extend the wireless network. For example, w
...ingle network, making it possible for the devices to communicate with each other while also providing the devices with an Internet connection.
6 KB (1,114 words) - 15:28, 13 September 2022
<td>Device is powered over the Main power connector.</td>
<td>Device is not powered over the Main power connector.</td>
13 KB (1,978 words) - 16:56, 24 January 2024
...ares that this RUT956 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declar
...any people and must not be co-located or operated in conjunction with any other antenna or transmitter.
25 KB (3,521 words) - 16:30, 20 February 2024
The <b>WAN</b> section displays information about the Main and Backup WAN connections. The figure below is an example of the Mobile pa
...HCP client, meaning that it receives a dynamically assigned IP address and other network configuration parameters</li>
4 KB (553 words) - 10:52, 25 October 2019
The <b>WAN</b> section displays information about the Main and Backup WAN connections. The figure below is an example of the Mobile pa
...HCP client, meaning that it receives a dynamically assigned IP address and other network configuration parameters</li>
4 KB (509 words) - 14:19, 22 October 2020
Main differences between are shown in above table. AVL data element sizes in cod
...used for sending configuration, debug, digital outputs control commands or other (special purpose command on special firmware versions).
64 KB (8,599 words) - 21:49, 4 October 2019
...e private networks. GRE tunnels encapsulate data packets in order to route other protocols over IP networks.
===GRE: main & tunnel settings===
6 KB (880 words) - 11:51, 5 March 2021
...ng services use VLANs to separate their customers' private zones from each other, allowing each customer's servers to be grouped together in a single networ
...LAN section, except for the fact that will not be able to use them as the main configuration for your router's LAN.
6 KB (937 words) - 11:48, 19 July 2021
...ng services use VLANs to separate their customers' private zones from each other, allowing each customer's servers to be grouped together in a single networ
...LAN section, except for the fact that will not be able to use them as the main configuration for your router's LAN.
6 KB (939 words) - 12:35, 24 October 2023
...ng services use VLANs to separate their customers' private zones from each other, allowing each customer's servers to be grouped together in a single networ
...LAN section, except for the fact that will not be able to use them as the main configuration for your router's LAN.
6 KB (939 words) - 12:36, 24 October 2023
...ng services use VLANs to separate their customers' private zones from each other, allowing each customer's servers to be grouped together in a single networ
...LAN section, except for the fact that will not be able to use them as the main configuration for your router's LAN.
6 KB (951 words) - 12:37, 24 October 2023
...ng services use VLANs to separate their customers' private zones from each other, allowing each customer's servers to be grouped together in a single networ
...LAN section, except for the fact that will not be able to use them as the main configuration for your router's LAN.
6 KB (949 words) - 12:38, 24 October 2023
*** DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
*** Added formula for analog signal value conversion to other unit value
83 KB (11,989 words) - 09:48, 6 May 2024
*** DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
*** Added main section to make test functions independent in Modbus Client service
123 KB (17,692 words) - 09:48, 6 May 2024
*** DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
*** Added main section to make test functions independent in Modbus Client service
112 KB (16,148 words) - 09:49, 6 May 2024
*** DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
*** Added main section to make test functions independent in Modbus Client service
122 KB (17,557 words) - 09:49, 6 May 2024
*** DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
*** Added main section to make test functions independent in Modbus Client service
118 KB (16,878 words) - 09:49, 6 May 2024
{| class="main-table w-100" style="height:auto; width:100%;" align="center"
{| class="main-table w-100" style="height:auto; width:100%;" align="center"
6 KB (836 words) - 13:48, 28 May 2024
...s realized, not only will the two routers be able to communicate with each other, but the end devices will also be reachable to one another and from each ro
* Below are explanations of the parameters highlighted in the figure above. Other parameters (not highlighted) are defaults. You can find descriptions for th
9 KB (1,501 words) - 14:45, 1 February 2022
...relay and dynamically redirect incoming connections to a target host. Its main purpose in RUTxxx routers is to extend the wireless network. For example, w
...ingle network, making it possible for the devices to communicate with each other while also providing the devices with an Internet connection.
10 KB (1,568 words) - 15:17, 3 October 2023
...ck on the interface bellow `Mode` section, then drag it to the 1st, 2nd or other position and then press Save & Apply.{{#ifeq:{{{mobile}}}|0|<br><br><b>Note
...os on the Internet, about 60 would be downloaded through Wired WAN and the other 40 would be downloaded via {{{wan2}}}.
10 KB (1,531 words) - 15:34, 8 April 2024
...ck on the interface bellow `Mode` section, then drag it to the 1st, 2nd or other position and then press Save & Apply.{{#ifeq:{{{mobile}}}|0|<br><br><b>Note
...os on the Internet, about 60 would be downloaded through Wired WAN and the other 40 would be downloaded via {{{wan2}}}.
10 KB (1,564 words) - 10:59, 23 April 2024
The <b>WAN</b> section displays information about the Main and Backup WAN connections. The figure below is an example of the Mobile pa
...HCP client, meaning that it receives a dynamically assigned IP address and other network configuration parameters</li>
3 KB (391 words) - 15:12, 13 March 2019
...e private networks. GRE tunnels encapsulate data packets in order to route other protocols over IP networks.
===GRE: main & tunnel settings===
5 KB (754 words) - 15:03, 3 June 2021
...are connected to the main network and hacked, intruders can get into your other devices. One of the possible solutions is to create Guest WiFi separated by
<li>For '''VLAN ID 1''' set main Wireless Access Point name (example: “'''RUT_WiFi'''”) and '''LAN''' =>
7 KB (918 words) - 07:28, 23 August 2020
==Main measurements==
...s are presented without antenna connectors and screws; for measurements of other device elements look to the sections below.</font>
5 KB (737 words) - 08:42, 9 April 2024
*** DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
*** Added main section to make test functions independent in Modbus Client service
67 KB (9,438 words) - 12:10, 3 May 2024
*** DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
*** Added main section to make test functions independent in Modbus Client service
85 KB (12,081 words) - 12:13, 3 May 2024
*** DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
*** Added main section to make test functions independent in Modbus Client service
96 KB (13,642 words) - 12:14, 3 May 2024
*** DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
*** Added main section to make test functions independent in Modbus Client service
77 KB (11,020 words) - 09:48, 6 May 2024
*** DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
*** Added main section to make test functions independent in Modbus Client service
77 KB (11,020 words) - 09:48, 6 May 2024
*** DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
*** Added main section to make test functions independent in Modbus Client service
78 KB (11,174 words) - 09:48, 6 May 2024
*** DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
*** Added main section to make test functions independent in Modbus Client service
90 KB (12,942 words) - 09:49, 6 May 2024
*** DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
*** Added main section to make test functions independent in Modbus Client service
99 KB (14,197 words) - 09:49, 6 May 2024
*** DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
*** Added main section to make test functions independent in Modbus Client service
68 KB (9,682 words) - 13:00, 6 May 2024
*** Added formula for analog signal value conversion to other unit value
*** Added main section to make test functions independent in Modbus Client service
90 KB (12,956 words) - 09:30, 7 May 2024
==Main measurements==
...s are presented without antenna connectors and screws; for measurements of other device elements look to the sections below.</font>
6 KB (744 words) - 10:50, 8 May 2024
#Clicking on this button will direct you to the main menu, you will have to confirm this action, as this will terminate the curr
##Go back to the current connection's main page
3 KB (572 words) - 11:24, 8 May 2024