Search results

...k of malicious attacks. By following the instructions in this article, you can learn how to configure firewall traffic rules to enhance network security. ...t numbers specified in the packet headers. Additionally, traffic rules can be applied based on the specific firewall zone the packet is originating from

...T2XX_R_00.01.14.4'''. A configuration example with the new RUTOS WebUI can be found here:'' [[Providing connectivity for Helium miners using the RUT240]] ...that before starting with the procedure, the following prerequisites must be met:

...rand new WebUI. A configuration example with the legacy firmware WebUI can be found here:'' [[Providing connectivity for Helium miners using the RUT240 ( ...that before starting with the procedure, the following prerequisites must be met:

<td>A “Drop” action is performed on a packet that is determined to be invalid</td> <td>Action<span style="color: #0054A6;">'''*'''</span> that is to be performed for packets that pass through the Input chain</td>

<td>A “Drop” action is performed on a packet that is determined to be invalid</td> <td>Action<span style="color: #0054A6;">'''*'''</span> that is to be performed for packets that pass through the Input chain</td>

<td>A “Drop” action is performed on a packet that is determined to be invalid</td> <td>Action<span style="color: #0054A6;">'''*'''</span> that is to be performed for packets that pass through the Input chain</td>

<td>A “Drop” action is performed on a packet that is determined to be invalid</td> <td>Action<span class="asterisk">*</span> that is to be performed for packets that pass through the Input chain</td>

<td>A “Drop” action is performed on a packet that is determined to be invalid</td> <td>Action<span class="asterisk">*</span> that is to be performed for packets that pass through the Input chain</td>

<td>A “Drop” action is performed on a packet that is determined to be invalid</td> <td>Action<span class="asterisk">*</span> that is to be performed for packets that pass through the Input chain</td>

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

...Hikvision cameras as well as other cameras in general, although there may be differences in the user interfaces of these other products, the principles * An Ethernet cable for connecting the camera to one of the router's LAN ports

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

...Hikvision cameras as well as other cameras in general, although there may be differences in the user interfaces of these other products, the principles * An Ethernet cable for connecting the camera to one of the router's LAN ports

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

...at type of OpenVPN connection suits your needs the best. The key things to be considered here are the type of connection ('''TUN''' ('''tunnel''') or ''' ...layer device and it operates with layer 3 packets like IP packets. TUN is used for routing and connecting '''multiple''' clients to a single server.

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

*** Added the ability to set port for TACACS+ in PAM service *** Added new Post/Get service action "mobile_sim_pin" for changing used SIM PIN code on the device

*** Added the ability to set port for TACACS+ in PAM service *** Added new Post/Get service action "mobile_sim_pin" for changing used SIM PIN code on the device

...at type of OpenVPN connection suits your needs the best. The key things to be considered here are the type of connection ('''TUN''' ('''tunnel''') or ''' ...layer device and it operates with layer 3 packets like IP packets. TUN is used for routing and connecting '''multiple''' clients to a single server.

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

*** Added the ability to set port for TACACS+ in PAM service *** Added new Post/Get service action "mobile_sim_pin" for changing used SIM PIN code on the device

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

...ill be going through the Wireless WAN/Wired WAN or the Second Sim card (if used with RUTX12). ...of dividing traffic between multiple WAN interfaces. Load Balancing can be used to share the data load between different interfaces and increase the overal

The '''Events Log''' windows display records of such event as logins, reboots, resets, connections, configuration changes and more. ...ia SMS or email when certain events occur on your router. These events can be almost anything – configuration changes, reboots, new connections, variou

The '''Events Log''' windows display records of such event as logins, reboots, resets, connections, configuration changes and more. ...ia SMS or email when certain events occur on your router. These events can be almost anything – configuration changes, reboots, new connections, variou

The '''Events Log''' windows display records of such event as logins, reboots, resets, connections, configuration changes and more. ...ia SMS or email when certain events occur on your router. These events can be almost anything – configuration changes, reboots, new connections, variou

*** LAN: added a new IPv6 LAN status page *** PAM: added the ability to set port for TACACS+

...on and setup failover configuration using RUTX11. These configurations can be implemented on RUT, RUTX and TRB series devices. The Failover function allows you to backup your primary WAN connection in case it goes down.

...for RUT955's old WebUI style available in earlier FW versions. <b>[[RUT955 LAN|Click here]]</b> for information based on the latest FW version.</i> <td>IP address that the device uses on the LAN network </td>

...for RUT900's old WebUI style available in earlier FW versions. <b>[[RUT900 LAN|Click here]]</b> for information based on the latest FW version.</i> <td>IP address that the device uses on the LAN network </td>

...for RUT950's old WebUI style available in earlier FW versions. <b>[[RUT950 LAN|Click here]]</b> for information based on the latest FW version.</i> <td>IP address that the device uses on the LAN network </td>

The '''Events Log''' windows display records of such event as logins, reboots, resets, connections, configuration changes and more. ...ia SMS or email when certain events occur on your router. These events can be almost anything – configuration changes, reboots, new connections, variou

...e and humidity and communicates the results to a computer. Modbus is often used to connect a supervisory computer with a remote terminal unit (RTU) in supe ...and RUT950 routers, but the holding register information will differ. You can find this information in the links below:

<td>IP address of this LAN interface.</td> <td>A netmask is used to define how “large" the LAN network is.</td>

<td>IP address of this LAN interface.</td> <td>A netmask is used to define how “large" the LAN network is.</td>

...WAN port to function as LAN on RUTX devices, follow <b>[[Setting up WAN as LAN|this guide]]</b>. ...o function as LAN ports. However, this is not the default setting and must be set manually by following the steps described below.

..., and integrity. The combination of these two protocols is generally known as '''L2TP over IPsec''' (or simply '''L2TP/IPsec'''). ...a guide on how to configure L2TPv3/IPsec on RUTxxx routers. It should also be noted that this guide is aimed at more advanced users and, therefore, skips

...section is used to set up some of the router's managerial parameters, such as password, name, language, etc. For more information on the General section, <td>The router's hostname. This can be used instead of the IP address to reach the router's WebUI from the local networ

.... It can be useful as wired ISP redundant connection or even to change the port for physical damage or a custom mounting. Connect to the router’s WebUI navigate to '''Network → VLAN → LAN Network''' and create a new interface by entering name and clicking '''Add

...enable its usage by applications (such as [https://www.putty.org/ Putty]) as a native device of the computer. ...n your device's WebUI, you should '''turn on "Advanced WebUI" mode'''. You can do that by clicking the "Basic" button under "Mode", which is located at th

...will find instructions on how to configure a surveillance system that can be managed and controlled remotely via VPN with the help of a single RUT route ...ble to other VPN clients. In order to reach individual devices in the LAN, Port Forwarding to each device is configured on the RUT.

...will find instructions on how to configure a surveillance system that can be monitored remotely via [https://www.videolan.org/vlc/index.html VLC player] ...meras in the LAN via [https://www.videolan.org/vlc/index.html VLC player], Port Forwarding to each device is configured on the RUT.

...vices that have Ethernet ports. It can be useful if you want the device to be able to connect to the internet without relying on a SIM card. * TRB series device with Ethernet port.

...will find instructions on how to configure a surveillance system that can be managed and controlled remotely via VPN with the help of a single RUT route ...rk reachable to other VPN clients. To reach individual devices in the LAN, Port Forwarding to each device is configured on the RUT.

...rs configured in this section as slave devices. A Modbus TCP master device can then request data from these Modbus TCP slaves. Here is the scheme to make Firstly, let's configure our second router which will be acting as a slave device.

...You can find basic information in the [[General Information]] page and you can find answers to some of the most frequently asked question in this FAQ page To find specific information related to your device, follow a path such as this from the Wiki's home page:<br>

*** Fixed JSON key parsing; keys can now be any printable character sequence *** Added the possibility to select multiple ports in all firewall port fields

...existing on a VPN network. TLS encryption provided by Stunnel can be used as an additional layer of encryption for data sent by OpenVPN. This procedure ...his allows the transfer of data between remote private networks (LAN A and LAN B) and adds a TLS security layer for the connection.

...allows to set up parameter update intervals for the registered devices. It can optimize the monitoring process and reduce monthly data usages for devices ...tervals. You can set up the monitoring update frequency; on the right, you can set the time units for that setting.

...ests to the topic '''<TYPE>/<SERIAL>/parameter_name'''. The MQTT Publisher can send responses containing values of these system parameters, if device supp ! style="text-align: left; vertical-align: top;" | wan

**[[Port forwarding does not work, what should I do?]] **[[How can I restart a router that can‘t be accessed remotely via the Internet?]]

<li> [[Port forwarding does not work, what should I do?]] </li> <li> [[How can I restart a router that can‘t be accessed remotely via the Internet?]] </li>

...our company members use, the guest WiFi network restricts what your guests can do in your network. It gives visitors access to the Internet connection, bu ...you start configuring the router <b>turn on "Advanced WebUI" mode</b>. You can do that by clicking the "Basic" button under "Mode", which is located at th

...ly connected to the Radius server and forward authentication requests to a LAN IP address of the server via default Radius ports. ...example we will add the following lines in order to accept any IP address as a client: