Template:Configuration examples RUTOS
Revision as of 14:31, 16 August 2023 by PauliusRug (talk | contribs)
This page contains various configuration guides for the {{{name}}} router. Unlike the articles in the [[{{{name}}} Manual]], which provide more general knowledge on all of the router's features and functions, these guides are more in-depth and are usually focused on specific configuration scenarios with extensive explanations. While most of the guides apply to both Windows and Linux Operating Systems, some are exclusive to one OS and others aren't OS specific in any way and apply to any system.
Router control and monitoring
- Configuration Backup
- Command line interfaces
- MQTT (Linux guide)
- UCI command usage
- Crontabs
- SSH RSA key authentication (Linux)
- SSH RSA key authentication (Windows)
- Blocking Internet Access for LAN Clients
- Monitoring with ThingsBoard IoT Platform
- DHCP relay
- Monitoring via JSON-RPC windows
- Monitoring via JSON-RPC linux
- Monitoring via Zabbix
- Firewall traffic rules
- Removing_of_HTTPS_security_warning
- MQTT broker bridge
- OPC UA Configuration Example
- SSHFS
Modbus
- [[{{{name}}} Monitoring via Modbus | Monitoring via Modbus]]
- Modbus custom register block RutOS
- Modbus TCP Slave Send SMS example
DNP3
System upgrades
Connection backup
VPN
- DMVPN
- OpenVPN configuration example
- IPsec cofiguration example
- ZeroTier One VPN configuration example
- ZeroTier
- L2TP configuration examples
- Overlapping subnets with IPsec solution
- GRE over IPsec Tunnel
- L2TP over IPsec RutOS
- Cisco IPsec
- Cisco GRE
- Setting up a GRE over IPsec tunnel between Teltonika Networks and Cisco devices
- Mikrotik GRE over IPsec Tunnel
- Mikrotik SSTP
- Mikrotik OpenVPN
- Mikrotik L2TP over IPsec
- OpenVPN Access Server
- Setting up an IPsec tunnel between RUT and Android phone
- Tinc VPN configuration examples
- L2TP over IPsec VPN to a PC configuration example
- OpenVPN traffic split
- Default IPsec route configuration between Teltonika Networks devices
- OpenVPN over Stunnel
- DMVPN with IPsec Phase 3
- L2 LAN bridging over internet using L2TPv2+EoIP
- 1NCE Configuration
- ExpressVPN
- NordVPN
DDNS
Camera
PC
Windows
- Static IP address setup (Windows 10)
- OpenVPN client on Windows
- OpenVPN server on Windows
- TLS certificates (Windows)
Linux
- Static IP address setup (Ubuntu 16)
- FTP server (Ubuntu 16)
- OpenVPN client on Linux
- TLS certificates (Ubuntu 18)
macOS
SNMP
Use cases
VPN
- Connecting two same subnet office networks using OpenVPN bridge (TAP)
- Connecting to the office network remotely from your home via VPN (L2TP over IPsec)
- Connecting to the office network remotely from your home via VPN (OpenVPN)
- Configuring clients to access internet through office's gateway from home using VPN
- Reaching your home network remotely with your Android device
- Bridged office network with a separate Guest WiFi
- Anonymous browsing from your home network using NordVPN
- Anonymous browsing from your home network using ExpressVPN
- L2TPv3 over IPsec configuration example
DHCP
Third party services
IoT platforms
- Azure IoT Hub cloud connection
- Cumulocity
- da³vid
- AWS MQTT cloud connection
- BAG·Tower
- N3uron Notifier
- OpenRemote
[[Category:{{{name}}}]]