Difference between revisions of "RUT142 Configuration Examples"
From Teltonika Networks Wiki
m (Protected "RUT142 Configuration Examples" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) |
m (JuliusSkuolevicius moved page Draft:RUT142 Configuration Examples to RUT142 Configuration Examples without leaving a redirect: From draft to main) |
(No difference)
| |
Revision as of 16:29, 3 October 2024
This page contains various configuration guides for the RUT142 router. Unlike the articles in the RUT142 Manual, which provide more general knowledge on all of the router's features and functions, these guides are more in-depth and are usually focused on specific configuration scenarios with extensive explanations. While most of the guides apply to both Windows and Linux Operating Systems, some are exclusive to one OS and others aren't OS-specific in any way and apply to any system.
Router control and monitoring
- Configuration Backup
- Command line interfaces
- MQTT (Linux guide)
- UCI command usage
- Crontabs
- SSH RSA key authentication (Linux)
- SSH RSA key authentication (Windows)
- Monitoring with ThingsBoard IoT Platform
- Monitoring via JSON-RPC windows
- Monitoring via JSON-RPC linux
- Monitoring via Zabbix
- Firewall traffic rules
- Removing of HTTPS security warning
- MQTT broker bridge
- OPC UA Configuration Example
- Setting up external Radius server for RUTOS authentication
- SSHFS
VPN
- DMVPN configuration example
- DMVPN with OSPF configuration example
- OpenVPN configuration example
- IPsec cofiguration example
- ZeroTier One VPN configuration example
- ZeroTier configuration example
- L2TP configuration example
- Overlapping subnets with IPsec solution
- GRE over IPsec Tunnel
- IPsec_Tunnel_with_X.509_Authentication_configuration_example
- L2TP over IPsec RutOS
- Fortigate IPsec default route configuration example
- Fortigate IPsec site to site configuration example
- Cisco IPsec
- Cisco GRE
- Setting up a GRE over IPsec tunnel between Teltonika Networks and Cisco devices
- Mikrotik GRE over IPsec Tunnel
- Mikrotik SSTP
- Mikrotik OpenVPN
- Mikrotik L2TP over IPsec
- OpenVPN Access Server
- OpenVPN Access control
- Setting up an IPsec tunnel between RUT and Android phone
- Tinc VPN configuration examples
- L2TP over IPsec VPN to a PC configuration example
- OpenVPN traffic split
- Default IPsec route configuration between Teltonika Networks devices
- OpenVPN over Stunnel
- L2 LAN bridging over internet using L2TPv2+EoIP
- 1NCE Configuration
- ExpressVPN configuration example
- NordVPN configuration example
IoT platforms
- Azure IoT Hub Cloud Connection
- Cumulocity
- da³vid
- AWS MQTT cloud connection
- BAG Tower
- N3uron Notifier
DLMS
PC
Windows
- Static IP address setup (Windows 10)
- OpenVPN client on Windows
- OpenVPN server on Windows
- TLS certificates (Windows)
- Wake on LAN PC setup (Windows)
Linux
- Static IP address setup (Ubuntu 16)
- FTP server (Ubuntu 16)
- OpenVPN client on Linux
- TLS certificates (Ubuntu 18)
DDNS
System upgrades
DNP3
SNMP
Camera
Wireless
- Wi-Fi WAN configuration example
- Guest Wi-Fi network configuration example
- Wireless Mesh configuration example
- Relay / Wi-Fi extender / Repeater/ Bridge configuration example
- Wi-Fi roaming setup for home or small office
- Connecting to a Hotspot Wi-Fi for internet connectivity
- Setting up external Radius server for Hotspot authentication
- Relayd
- IdBlender Secure WiFi Setup
- Guglielmo LUMEN® AAA WiFi Setup
- Extending Router Hotspot Network with TAP100
WAN
- Setting up WAN as LAN
- Load Balancing Rules/Policies examples
- OSPF Route Failover
- VRRP configuration example
- Starlink Failover Configuration
LAN
- Setting up a PPPoE between Teltonika Networks router and a Mikrotik device
- VLAN Inter-Zone accessibility control configuration example
- LAN as WAN configuration example
- VLAN: Tag-Based configuration example
- Blocking Internet access for LAN clients
- VLAN Set Up configuration example
DHCP
RS232/RS485
- Data transfer from Modbus TCP to Modbus RTU Gateway
- Modbus RTU Master MQTT Serial Gateway
- BACnet configuration example
- Bidirectional communication between two serial devices over TCP/IP
- Connect Serial Devices as Virtual COM Ports using TRB145 and HW VSP3
- Reaching Cisco router console port remotely
- Serial OverIP communication between Server and Client
